Summary of changes from v043 to v044 ============================================ Greg Kroah-Hartman: o add cdsymlinks.sh support to gentoo rules file o fix gentoo legacy tty rule o remove 'sudo' usage from the Makefile o make udev-test.pl test for root permissions before running Kay Sievers: o reduce syslog noise of udevsend if multiple instances try to start udevd o add i2c-dev to the list of devices without a bus Summary of changes from v042 to v043 ============================================ Greg Kroah-Hartman: o add test target to makefile o add dumb script to show all sysfs devices in the system Kay Sievers: o Shut up wait_for_sysfs class/net failure messages, as it's not possible to get that right for all net devices. Kernels later than 2.6.10-rc1 will handle that by carrying the neccessary information in the hotplug event. o wait() for specific pid to return from fork() o Don't use any syslog() in signal handler, cause it may deadlock o Add support for highpoint ataraid to volume_id to suppress label reading on raid set members. o Add a bunch of devices without "device" symlinks o Exit, if udevtest cannot open the device (segfault) o Patches from Harald Hoyer o Apply the default permissions even if we found a entry in the permissions file. Correct one test, as the default is applied correctly now and the mode will no longer be 0000. o add test for format chars in multiple symlinks to replace o Add net/vmnet and class/zaptel to the list of devices without physical device Summary of changes from v040 to v042 ============================================ Greg Kroah-Hartman: o add inotify to the rules for gentoo Kay Sievers: o skip waiting for device if we get a bad event for class creation and not for a device underneath it o add net/pan and net/bnep handling o switch wait for bus_file to stat() instead of open() add net/tun device handling add ieee1394 device handling o Remove the last klibc specific line from the main udev code Move _KLIBC_HAS_ARCH_SIG_ATOMIC_T to the fixup file which is automatically included by the Makefile is we build with klibc o ignore *.rej files from failed patches o update to libsysfs 1.2.0 and add some stuff klib_fixup Now we have only the sysfs.h file different from the upstream version to map our dbg() macro. o improve klibc fixup integration o cleanup udevd/udevstart o expose sysfs functions for sharing it Summary of changes from v039 to v040 ============================================ : o wait_for_sysfs update for dm devices Greg Kroah-Hartman: o sparse cleanups on the tree o fix stupid cut-and-paste error for msr devices on gentoo boxes o add *~ to bk ignore list o delete udevruler.c as per Kay's request o fix up the wait_for_sysfs_test script a bit Kay Sievers: o fix debug in volume id / fix clashing global var name o volume_id fix o $local user o cleanup netif handling and netif-dev.d/ events o big cleanup of internal udev api o don't wait for dummy devices o close the syslog o Fix ppp net devices in wait_for_sysfs o Fix wait_for_sysfs messages (more debugging info) Summary of changes from v038 to v039 ============================================ Greg Kroah-Hartman: o Hopefully fix the vcs issue in wait_for_sysfs o take out & from wait_for_sysfs_test that I previously missed o add very nice cdsymlinks scripts o add some helper scripts for dvb and input devices o add debian config files o let the extras/ programs build "pretty" also o tweak the ccdv program to handle files in subdirectories being built o crap, I messed up the 'sed' instances pretty badly, this fixes the config and man page mess o fix broken 'make -j5' functionality Kay Sievers: o swich attribute open() to simple stat() o wait_for_sysfs update for /class/firmware and /class/net/irda devices o fix unusual sysfs behavior for pcmcia_socket o remove sleeps from udev as it is external now o delete udevruler? o Makefile fix Patrick Mansfield: o update udev to scsi_id 0.7 o pass SYSFS setting down for extras builds o move assignments past local variables Summary of changes from v037 to v038 ============================================ : o Re: Problem parsing %s in udev rules Greg Kroah-Hartman: o fix up error in building extras and libsysfs Summary of changes from v036 to v037 ============================================ : o small udev patch Greg Kroah-Hartman: o fix compilation warning in tdb log message o Fix build error with klibc due to recent changes o merge o add wait_for_sysfs test script to the tarball to help people debug their boxes o add ipsec to wait_for_sysfs ignore list o added ccdv to bk ignore list o a few more Makefile tweaks for the quiet feature o Make the build silent, thanks to a helper program from ncftp o rename files to have '_' instead of '-' in them o change max time to wait in wait_for_sysfs to 10 seconds to hopefully handle some slow machines o add support for class/raw/ to wait_for_sysfs o fix up Makefile for wait_for_sysfs udev_version.h dependancy o remove the debian specific file, as they don't want to share with the rest of the world :( Kay Sievers: o prevent deadlocks on an corrupt udev database o wait_for_sysfs_update Michael Buesch: o fix asmlinkage o fix incompatible pointer type warning Summary of changes from v035 to v036 ============================================ Greg Kroah-Hartman: o add the error number to the error message in wait_for_sysfs to help out in debugging problems Summary of changes from v034 to v035 ============================================ Greg Kroah-Hartman: o added ieee1394 support to wait_for_sysfs o update wait_for_sysfs with a bunch more devices thanks to user reports Summary of changes from v033 to v034 ============================================ Kay Sievers: o wait_for_sysfs bluetooth class update Greg Kroah-Hartman: o add comment in wait_for_sysfs to explain the structure better o Revert previous dev_d.c change, it's not what is causing HAL problems o hm, somethings odd with DEVPATH, see if this fixes it o 33_bk mark for the makefile o wait_for_sysfs: clean up the logic for the list of devices that we do not expect device symlinks for o get rid of annoying extra lines in the syslog for some libsysfs debug messages o added support for i2c devices in wait_for_sysfs.c o add support for i2c-adapter devices to wait_for_sysfs.c Summary of changes from v032 to v033 ============================================ : o udev close on exec o some cleanups and security fixes o some cleanups and security fixes o selinux for udev o cleanup PATCH for extras/chassis_id/Makefile : o respect prefix= setting in built udev.conf (updated) Greg Kroah-Hartman: o add support for usb interfaces to wait_for_sysfs to keep it quiet o enable native tdb spinlocks on i386 platforms o delete extras/multipath-tools as per the author's request o be paranoid in dev_d.c o add USE_SELINUX to README documentation so people have a chance to see what is going on o update the selinux.h file to start to look sane o update bk ignore list for the wait_for_sysfs binary o kdetv wants to see device nodes in /dev o update comments in scsi-devfs.sh o fix up Makefiles to get the klibc build working properly o update bk ignore list for new klibc generated files o oops forgot to add the new klibc/include directory o update klibc to version 0.181 Kay Sievers: o fix problems with dev.d and udevstart o wait_for_sysfs debug cleanup o fix problems using scsi_id with udevstart o update volume_id o finally solve the bad sysfs-timing for all of us o volume-id build fix and update o switch udev's seqnum to u64 o add enum tests o fix udev segfaults with bad permissions file Patrick Mansfield: o update udev to include scsi_id 0.6 Summary of changes from v031 to v032 ============================================ : o udev parse bug Kay Sievers: o handle only block and class devices o fix udevstart badly broken in udev 031 Summary of changes from v030 to v031 ============================================ : o udev - read long lines from config files overflow fix : o Update the FAQ with info about hardlink security : o compatibility symlinks for udev David Weinehall: o Minor POSIX-fixes for udev Greg Kroah-Hartman: o add symlink for video rule o add a "first" list to udevstart and make it contain the class/mem/ devices o fix compiler warning in udevtest.c o Fix old-style pty breakage in rules file for tty device o add rules for i386 cpu devices o add permission for legotower usb devices Kay Sievers: o Fix naming ethernet devices in udevstart o update udev_volume_id o let /sbin/hotplug execute udev earlier o pass SEQNUM trough udevd o fix manpages based on esr's spambot Martin Schlemmer: o add microcode rule to permissions.gentoo file Michael Buesch: o Try to provide a bit of security for hardlinks to /dev entries Olaf Hering: o udevsend depends on udev_lib.o Tom Rini: o fix UDEV_NO_SLEEP o clean up start_udev a bit o Make udev/udevstart be one binary o Add 'asmlinkage' to udev-030 Summary of changes from v029 to v030 ============================================ Greg Kroah-Hartman: o fix stupid off-by-one bug that caused udevstart to die on x86-64 boxes Summary of changes from v028 to v029 ============================================ Greg Kroah-Hartman: o add permission rule for jogdial device o fix dumb bug I added to udevstart o make a "last list" of devices for udevstart to operate on last o fix permission problem with input event and ts nodes for gentoo o change default perms of misc/rtc to be readable by anyone Olaf Hering: o allow NAME_SIZE > SYSFS_PATH_MAX Summary of changes from v027 to v028 ============================================ : o Patch for chassis_id exras module Daniel Drake: o Writing udev rules doc update Greg Kroah-Hartman: o clean up block whitelist search logic a bit o reverse order of scanning of udevstart to look at class before block Kay Sievers: o update udev_volume_id Leann Ogasawara: o udevstart performance increase Patrick Mansfield: o update udev scsi_id to scsi_id 0.5 Summary of changes from v026 to v027 ============================================ : o fix handle leak in udev_lib.c Greg Kroah-Hartman: o tweak the gentoo default permission rules as they are wrong for tty and misc devices Summary of changes from v025 to v026 ============================================ Arnd Bergmann: o udev rpm fix Greg Kroah-Hartman: o add test for ! in partition name o 025_bk mark o Update to version 117 of klibc (from version 108) o add volume_id ignore rule for bk o add volume_id support to the udev.spec file o remove dbus and selinux stuff from the udev.spec file o delete udev_selinux as it doesn't work properly and is the wrong way to do it o Deleted the udev_dbus extra as it didn't really work properly and HAL has a real solution now o add udev.permissions.slackware file o udevstart: close open directories Kay Sievers: o fix udevd zombies o catchup with recent klibc o Re: udevsend fallback o udev_volume_id update o udev callout for reading filesystem labels o udev callout for reading filesystem labels o udev default config layout changes Leann Ogasawara: o evaluate getenv() return value for udev_config.c Summary of changes from v024 to v025 ============================================ : o devfs.sh-ide-floppy : o DEVNODE -> DEVNAME transition fixes Daniel Drake: o Update writing udev rules docs Greg Kroah-Hartman: o make dev.d call each directory in the directory chain of the device name, instead of just the whole name o add devd_test script o add more permissions based on SuSE's recommendations o added rules for tun and raw devices o add udev conf.d file o Switch the default config to point to a directory for the rules and permission files o update the Red Hat .dev files to work on other distros o add dbus.dev, pam_console.dev and selinux.dev files for /etc/dev.d/default/ usage o add hints for red hat users from Leann Ogasawara o add scripts to run gcov for udev from Leann Ogasawara o change permissions on udevd test scripts o Fix build process for users who have LC_ALL set to a non-english language o Added expanded tests to the test framework from Leann Ogasawara o added execelent "writing udev rules" document from Daniel Drake o added rule to put USB printers in their proper places o added rules for CAPI devices o added a dev.d alsa script to help people out Kay Sievers: o fix test regressions o udev_selinux changes o udevd test script o udev_dbus changes o fix devpath for netdev Leann Ogasawara: o gcov for udev Summary of changes from v023 to v024 ============================================ : o Add README for chassis_id o Add chassis_id program to extras directory : o udevd race conditions and performance, assorted cleanups : o fix SEGV in libsysfs/dlist.c : o add OSDL documentation for persistent naming : o small ide-devfs.sh fix Greg Kroah-Hartman: o remove compiler warning from udevd.c o only generate udev.8 on the fly, not all other man pages o update bk ignore list some more o update bk ignore list o switch to generate the man pages during the normal build, not during the install o convert udev.8.in to use @udevdir@ macro for make install o first step of making man pages dynamically generated o add install and uninstall the etc/dev.d/net/hotplug.dev file to the Makefile o tweak net_test a bit o fix some segfaults when running udevtest for network devices o make a net_test test script using udevtest o handle the subsytem if provided in udevtest o add hotplug.dev script to handle renamed network devices o add a bunch of network class devices to the test sysfs tree o add udevruler to the bk ignore list o update RFC-dev.d docs due to DEVNODE to DEVNAME change o clean up chassis_id coding style o clean up the OSDL document formatting a bit o add netlink rules to devfs and gentoo rules files o added USB device rules to rules files o clean up the gentoo rules file a bit more, adding dri rules o fix up udev.rules to handle oss rules better o 023_bk mark o fix udev.spec file for where udevtest should be placed Kay Sievers: o tweak node unlink handling o switch udevd's msg_dump() to #define o handle netdev in udevruler o man page cleanup o put config info in db for netdev o increase udevd event timeout o udevstart fix o put netdev handling and dev.d/ in manpages o DEVPATH for netdev o netdev - udevdb+dev.d changes o udevd race conditions and performance, assorted cleanups - take 2 o udevinfo patch o dev_d.c file sorting and cleanup o apply all_partitions rule to main block device only Summary of changes from v022 to v023 ============================================ Kay Sievers: o hmm, handle net devices with udev? o correct apply_format() for symlink only rules o don't init namedev on remove o first stupid try for a rule compose gui o replace fgets() with mmap() and introduce udev_lib.[hc] o make udevtest a real program :) Daniel E. F. Stekloff: o udevinfo patch Greg Kroah-Hartman: o create the /etc/dev.d/ directories in 'make install' o actually have udev run files ending in .dev in the /etc/dev.d/ directory as documented o added RFC-dev.d document detailing how /etc/dev.d/ works o fixed up udev.spec to handle selinux stuff properly now o remove USE_DBUS and USE_SELINUX flags from the README as they are no longer present o remove selinux stuff from the main Makefile o move udev_selinux into extras/selinux o fix dbus build in the udev.spec file o remove dbus stuff from main Makefile o move udev_dbus to extras/dbus o udev_dbus can now compile properly, but linnking is another story o remove udev_dbus.h from Makefile o first cut at standalone udev_selinux program o remove selinux support from udev core as it's no longer needed o first cut at standalone udev_dbus program o add get_devnode() helper to udev_lib for udev_dbus program o remove dbus code from core udev code as it's no longer needed to be there o add /etc/dev.d/ support for udev add and remove events o fix build error in namedev.c caused by previous patch o 022_bk tag o fix 'make spotless' to really do that in klibc o add a question/answer about automounting usb devices to the FAQ o mark scsi-devfs.sh as executable o Increase the name size as requested by Richard Gooch o fix udevtest to build properly after the big udev_lib change Olaf Hering: o uninitialized variable for mknod and friend Richard Gooch: o SCSI logical and physical names for udev Theodore Y. T'so: o Trivial man page typo fixes to udev Summary of changes from v021 to v022 ============================================ : o more Libsysfs updates o Libsysfs updates : o fix HOWTO-udev_for_dev for udevdir Kay Sievers: o udev-test.pl cleanup o add dev node test to udev-test.pl o add permission tests o "symlink only" test o callout part selector tweak o cleanup callout fork o allow to specify node permissions in the rule o man page beauty o put symlink only rules to the man page o rename strn*() macros to strmax o conditional remove of trailing sysfs whitespace o clarify udevinfo text o better fix for NAME="foo-%c{N}" gets a truncated name o overall trivial trivial cleanup o fix NAME="foo-%c{N}" gets a truncated name o cleanup mult field string handling : o fix a type in docs/libsysfs.txt o Added line to udev.permissions.redhat o Include more examples in the docs area for gentoo and redhat : o udevstart fixes Greg Kroah-Hartman: o add big major tests to udev-test.pl o add a test for a minor over 255 o udev-test.pl: print out major:minor and perm test "ok" if is ok o make perm and major:minor test errors be reported properly o remove extra ; in namedev_parse.c o Added multipath-tools 0.1.1 release o deleted current extras/multipath directory o 021_bk mark o fix the build for older versions of gcc Hanna V. Linder: o Small fix to remove extra "will" in man page Olaf Hering: o make spotless o udev* segfaults with new klibc Patrick Mansfield: o add tests for NAME="foo-%c{N}" Summary of changes from v020 to v021 ============================================ Kay Sievers: o install udevinfo in /usr/bin o blacklist pcmcia_socket Greg Kroah-Hartman: o fix udev.spec to find udevinfo now that it has moved to /usr/bin o Fix another problem with Makefile installing initscript o fix the Makefile to install the init script into the proper directory o make spec file turn off selinux support by default Summary of changes from v019 to v020 ============================================ : o multipath update Kay Sievers: o man page udevstart o cleanup udevstart o bugfix for local user o unlink bugfix o TODO update o clarify udevinfo device walk o udevinfo symlink reverse query o fix stroul endptr use o add $local user spport for permissions o udev - man page update o udev - fix debug info for multiple rule file config o udev - kill udevd on install o udev - activate formt length attribute o udev - safer sprintf() use : o no error on enoent o escape dashes in man pages o remove usage of expr in ide-devfs.sh : o automatically install correct initscript o update documetation for $local Andrey Borzenkov: o Add symlink only rules support Greg Kroah-Hartman: o update the TODO list as we already have a devfs config file o make start_udev use udevstart binary o install udevstart o Remove Debian permission files as the Debian maintainer doesn't seem to want to share :( o update the Gentoo rules files o Add Red Hat rules and permissions files o add udevstart to the ignore list o add udevstart program based on a old patch from Harald Hoyer o unlink the file before we try to create it o Merge greg@bucket:/home/greg/src/udev into kroah.com:/home/greg/src/udev Summary of changes from v018 to v019 ============================================ Kay Sievers: o TODO update o udev - correct relative symlink o udev - safer string handling - part four o udev - safer string handling - part three o udev - safer string handling - part two o udev - man page update o udev - safer string handling all over the place o manpage update o udev - allow all files in a directory as the config o udev - simple klibc textual uid/gid handling Andrey Borzenkov: o do not remove real .udev.tdb during RPM build Greg Kroah-Hartman: o add new TODO item about local user permissions o Add initial SELinux support for udev o fix build for very old versions of make o remove limit of the number of args passed to PROGRAM o force udev to include the internal version of libsysfs and never the external one o fix up libsysfs header file usage to fix bug reports from users that have sysfsutils installed already o remove udevtest on 'make clean' o remove udevd priority TODO item, as it's not needed at all Patrick Mansfield: o update udev scsi_id to scsi_id 0.4 Summary of changes from v017 to v018 ============================================ : o [PATCH] symlink dm-[0-9]* rule o update extras/multipath : o init.d debian patch Kay Sievers: o udev - TODO update o udev - add %s{filename} to man page o udev - udevd/udevsend man page o udev - switch callout part selector to {attribute} o udev - switch SYSFS_file to SYSFS{file} o udev - create all partitions of blockdevice o allow SYSFS{file} o Adding '%s' format specifier to NAME and SYMLINK Greg Kroah-Hartman: o added some scsi_id files to the bk ignore file o added scsi_id and some more documentation to the udev.spec file o update udev.rules.gentoo with new config file format o Update the Gentoo udev.rules and udev.permissions files o Create a udev.rules.examples file to hold odd udev.rules o add udevd priority issue to the TODO list o more HOWTO cleanups o add HOWTO detailing how to use udev to manage /dev o mv libsysfs/libsysfs.h to libsysfs/sysfs/libsysfs.h to make it easier to use o add start_udev init script o add support for UDEV_NO_SLEEP env variable so Gentoo people will be happy o start up udevd ourselves in the init script to give it some good priorities o update the red hat init script to handle nodes that are not present o add a "old style" SYSFS_attribute test to udev-test.pl o Have udevsend report more info in debug mode o Have udevd report it's version in debug mode o fix up bug created for udevtest in previous partition creation patch o update the udev.spec to add udevtest and make some more Red Hat suggested changes o add ability to install udevtest to Makefile o 017_bk mark o Add another test to udev-test.pl and fix a bug when only running 1 test o Fix bug where we did not use the "converted" kernel name if we had no rule Patrick Mansfield: o udev use new libsysfs header file location o udev add some ID tests Summary of changes from v016 to v017 ============================================ : o make logging a config option : o more udev-016/extras/multipath o more udev-016/extras/multipath o update extras/multipath Kay Sievers: o udev - keep private data out of the database? o better credential patch o udevd - client access authorization o compile udevd with klibc o udev - fix "ignore method" o udev - fix cdrom symlink rule o convert udevsend/udevd to DGRAM and single-threaded o udevd - kill the lockfile o udevd - fix socket path length o udevd - switch socket path to abstract namespace o udevd - allow to bypass sequence number o include used function Greg Kroah-Hartman: o add udev_log to the documentation o fix offsetof() define in klibc o add some .spec file changes from Red Hat o update the init.d udev script based on a patch from Red Hat o remove the .udev.tdb when installing or uninstalling to be safe o remove the database at startup o fix bug in permission handling o update klibc to version .107 o update the bitkeeper ignore file list o add udevtest program to build o fix problem where usb devices can be either the main device or the interface o more logging.h cleanups to be a bit more flexible o stop using mode_t as different libcs define it in different ways :( o remove some more KLIBC fixups that are no longer needed o let udev-test.pl run an individual test if you ask it to o Handle the '!' character that some block devices have o add a block device with a ! in the name, and a test for this o fix up 'make release' to use bk to build the export tree o fix log option code so that it actually works for all udev programs o finish syncing up with klibc o sync with latest version of klibc (0.107) o fix up Makefile dependancies for udev_version.h Patrick Mansfield: o udev add wild card compare for ID o udev kill extra bus_id compares in match_id Summary of changes from v015 to v016 ============================================ : o get_dev_number() in extras/ide-devfs.sh : o FAQ udev.rules.devfs Greg Kroah-Hartman: o add udevd and udevsend to the spec file o make /etc/hotplug.d/default/udev.hotplug symlink point to udevsend now o add KERNEL_DIR option so that the distros will be happy o make udevsend binary even smaller o udevsend now almost compiles with klibc, struct sockaddr_un is only problem now o fix up logging code so that it can be built without it being enabled o rework the logging code so that each program logs with the proper name in the syslog o remove logging.c as it's no longer needed o kill the last examples that contained the %D option o remove a __KLIBC__ tests in libsysfs, as klibc now supports getpagesize() o udevd - remove stupid locking error I wrote o update to klibc version 0.101, fixing the stdin bug o fix Makefile typo for USE_LSB install o allow dbus code to actually build again Kay Sievers: o let udevsend build with klibc o udevd - config cleanup o udevd - cleanup and better timeout handling o fix possible buffer overflow o udevd - next round of fixes o udevinfo - missing options for man page o udev - trivial style cleanup Summary of changes from v014 to v015 ============================================ : o LFS init script update Greg Kroah-Hartman: o update klibc to version 0.98 o clean up udevinfo on 'make clean' o add udevinfo man page to spec file o remove command line documentation from udev man page o create initial version of udevinfo man page o added URL to spec file o add udevinfo to udev.spec file o add udevinfo to install target of Makefile o rip out command line code from udev, now that we have udevinfo o udevinfo doesn't need to declare main_envp o move get_pair to udev_config.c because udevinfo doesn't need all of namedev.o o more makefile cleanups o move udevinfo into the main build and clean up the main Makefile a bit o clean up compiler warnings if building using klibc o make udevd only have one instance running at a time o new testd.block script for debugging o udevsnd : clean up message creation logic a bit o make bk ignore udevd and udevsend binaries o whitespace cleanups o remove TODO item about BUS value, as it is now done o add support for figuring out which device on the sysfs "chain" the rule applies to Kay Sievers: o udevinfo - now a real program :) o udevd - cleanup and better timeout handling o udev - next round of udev event order daemon o fix udevd exec o udev - udevinfo with device chain walk o spilt udev into pieces Summary of changes from v013 to v014 ============================================ : o libsysfs update for refresh + namedev.c changes : o udev-013/extras/multipath update : o minor patch for devfs rules Kay Sievers: o udev - program to query all device attributes to build a rule o set default owner/group in db - update o udev - reverse user query options o udev - kill %D from udev-test.pl o add udev logging to info log o udev - mention format string escape char in man page Greg Kroah-Hartman: o misc code cleanups o fixup logging.h to handle different logging options properly o clean up the logging patch a bit to make the option more like the other options o remove the %D modifier as it is not longer needed o remove unneeded keyboard rule o add usb_host and pci_bus to the class blacklist o added input device rules to udev.rules and udev.rules.devfs o 013_bk mark Hanna V. Linder: o set default owner/group in db o small cut n paste error fix Patrick Mansfield: o update udev scsi_id to scsi_id 0.3 Summary of changes from v012 to v013 ============================================ : o LSB init script and other stuff : o fix udev directory for Debian init script : o udev 012 old gcc fixup Christophe Saout: o add IGNORE rule type o small cleanup Greg Kroah-Hartman: o update TODO with some new, small items o Cset exclude: greg@kroah.com|ChangeSet|20040113010256|48515 o update the README in a few places o fix -d typo in the manpage update o Fix stupid gcc "optimization" of 1 character printk() calls.... Ick o oops, forgot to fix up the PROGRAM result from ID to RESULT in the config files o Add alsa device rules and a few other devfs rules o fix a few stale comments in namedev.c o convert the default rules files to the new format o convert the test shell scripts to the config file format o add bus test for usb-serial bus o Add some helpful messages if the user uses the older config file format o added dri rule to the default config file o added init.d udev script for debian o add a script that tests the IGNORE rule o add silly script that names cdrom drives based on the cd in them o add cdrom rule for ide cdrom o replace list_for_each with list_for_each_entry, saving a few lines of code o add a blacklist of class devices we do not want to look at Kay Sievers: o fix klibc with printf() and gcc o udev - small script optimization o udev - introduce format escape char o udev - more CALLOUT is PROGRAM now o udev - CALLOUT is PROGRAM now o update documentation for new config file format o more advanced user query options o udev - simple debug tweak o udev - drop all methods :) o udev - advanced user query options o udev - Makefile error o udev - make exec_callout() reusable o udev - exec status fix for klibc o fix Silly udev script Summary of changes from v011 to v012 ============================================ : o make symlink work properly if there is already a file in its place o Fix udev gcc-2.95.4 compat : o extras multipath update o extras multipath update Kay Sievers: o mention user callable udev + options in man page o make udev user callable to query the database o depend on all .h files o cleanup namedev_parse debug text o extend exec_program[] o ide-devfs.sh update o fix for apply_format() o check for empty symlink string o 'ide' missing in bus_files[] o small trivial cleanup of latest changes : o introduce signal handler : o udev spec file update Greg Kroah-Hartman: o minor grammer fixes for the udev_vs_devfs document o move the dbus config file to etc/dbus-1/system.d/ o move the config files to etc/udev to clean up main directory a bit o add Gentoo versions of the rules and permissions files o if using glibc, link dynamically, as no one like 500Kb udev binaries o minor change to udev_vs_devfs document o added udev vs devfs supid document to the tree o move the signal handling registration to after we have initialized enough stuff o make ide-devfs.sh executable in the tree o udev.permissions.debian - forgot the dm nodes o update the udev.permissions.debian file with new entries o added udev.init script for the Linux From Scratch project Summary of changes from v010 to v011 ============================================ : o proper cleanup on udevdb_init() failure : o patch udev 009-010 rpm spec file : o fix udev sed Makefile usage Greg Kroah-Hartman: o add documentation about the BUS key being optional for the LABEL rule o add tests for LABEL rule with a device that has no bus o Don't require the BUS value for the LABEL rule o If a LABEL rule has a BUS id, then we must check to see if the device is on a bus o add documentation about the BUS key being optional for the CALLOUT rule o If a CALLOUT rule has a BUS id, then we must check to see if the device is on a bus o Don't require the BUS value for the CALLOUT rule o add test for callout rule with a device that has no bus o 010_bk stamp o added different build options to the rpm udev.spec file o add pci to the bus_files list o check for empty line a bit better in the parser o more init script cleanups, the stop target now calls udev to cleanup instead of just removing the whole /udev directory o make udev init script run udev in the background to let startup go much faster o fix long delay for all devices in namedev Summary of changes from v009 to v010 ============================================ : o change pgsize : o extras multipath update o extras multipath update o extras multipath update o extras multipath update Kay Sievers: o fix udev-test.pl o small cleanup udev-remove.c o experimental CALLOUT script for devfs ide node creation with cd, disc, part o add any valid device o introduce format char 'k' for kernel-name o trivial make fixes o don't overwrite old config on install o udev-remove.c cleanups o bug in udev-remove.c o trivial cleanup parser changes : o fix comment and whitespace handling in config files Adam Kropelin: o Allow build with empty EXTRAS Daniel E. F. Stekloff: o libsysfs 0.4.0 patch o fix scsi_id segfault with udev-009 o add libsysfs docs David T. Hollis: o mark config files as such in the rpm spec file Greg Kroah-Hartman: o fix complier warning in namedev.c o add documentation for the new '%k' modifier (kernel name replacement) o add documentation about the multiple sysfs values that are now allowed for the LABEL rule o add tests for multi-file LABEL rules o add ability to have up to 5 SYSFS_ file/value pairs for the LABEL rule o Just live with a sleep(1) in namedev for now until libsysfs is fixed up o try to wait until the proper device file shows up in sysfs o remove unneeded TODO and FIXME entry o clean up the stand-alone tests to work properly on other people's machines o add tests to catch whitespace and comment config file parsing errors Summary of changes from v008 to v009 ============================================ : o more extras/multipath changes o and more extras/multipath updates o more extras/multipath updates o yet more extras/multipath o more extras/multipath updates o extras/multipath update : o D-BUS patch for udev-008 : o add init.d/udev to "make install" o add init.d/udev to the spec file Kay Sievers: o don't rely on field order in namedev_parse o get part of callout return string o remove '\n' from end of callout return o man-page mention multiple symlinks o allow multiple symlinks o cleanup man & remove symlink comment o experimental (very simple) SYMLINK creation o man page beauty o pattern match for label method o a bug in linefeed removal : o remove udev from runlevels on uninstall o install initscript in udev rpm Daniel E. F. Stekloff: o pre-libsysfs-0.4.0 patch Greg Kroah-Hartman: o signal fixes due to klibc update o sync klibc with release 0.95 o add mol permissions to the debian permissions file o update the FAQ with info about bad modprobe events from the devfs scheme o some cleanups due to the need for LABEL rules to use "SYSFS_" now o Add restart target to the etc/init.d/udev script o tweak the config file generation portion of the Makefile a bit o change devfs disk name rule from 'disk' to 'disc' o add vc support to udev.rules.devfs o added a devfs udev config file from Marco d'Itri o set default mode to 0600 to be safer o Makefile tweaks for the DBUS build o update the FAQ due to the latest devfs mess on lkml and also due to symlinks now working o document the different Makefile config options that we have o change USE_DBUS to DBUS in Makefile, and disable it by default as it's still to hard to build on all systems o fix formatting of udev_dbus.c to use tabs. Also get it to build properly now o move all of the DBUS logic into one file and remove all of the #ifdef crud from the main code Olaf Hering: o dump latest klibc into the udev build tree o use udevdir in udev.conf Patrick Mansfield: o better allow builds of extras programs under udev o update udev extras/scsi_id to version 0.2 Summary of changes from v007 to v008 ============================================ : o more config file parsing robustness : o udev-007/extras/multipath update Arnd Bergmann: o Build failure - missing linux/limits.h include? o Add format modifier for devfs like naming o klibc makefile fixes Daniel E. F. Stekloff: o another patch for path problem o quick fix for libsysfs bus o libsysfs changes for sysfsutils 0.3.0 Greg Kroah-Hartman: o fix up some duplicated function compiler warnings in libsysfs o fix some compiler warnings in the tdb code o Added Kay's name to the man page o update the wildcard documentation in the man page to show the new styles supported o fix permission handling logic o enable default_mode ability to actually build o add support for the default_mode variable, as it is documented o show permissions and groups in the label_test o remove some items off of the TODO list, as they are now done o fix up the tests to work without all of the environ variables o get rid of the majority of the debug environment variables o Update the man page to show the new config file, it's format, and how to use it o fix up the tests to support the rules file name change o add support for a main udev config file, udev.conf o turn debugging messages off by default o split out the namedev config parsing logic to namedev_parse.c o rename namedev's get_attr() to be main namedev_name_device() as that's what it really is o add devfs like tty rules as an example in the default config file o operate on the rules in the order they are in the config file (within the rule type) instead of operating on them backwards. o Cset exclude: dsteklof@us.ibm.com|ChangeSet|20031126173159|56255 o add test for checking the BUS value o fix problem where we were not looking at the BUS value o add scsi and pci bus links in the test sysfs tree o add test and documentation for new %D devfs format modifier o changed the default location of the database to /udev/.udev.tdb to be LSB compliant o get rid of functions in klibc_fixups that are now in klibc o sync up with the 0.84 version of klibc o fix udev init.d script to handle all class devices in sysfs o fix the test.block and test.tty scripts due to their moveing. Also add a test.all script o 007_bk version change to Makefile Kay Sievers: o pattern matching for namedev o catch replace device by wildcard o udev.8 tweak numeric id text o udev-test.pl add subdir test o namedev.c strcat tweak o overall whitespace + debug text conditioning o udev-test.pl - tweaks Martin Hicks: o Add -nodefaultlibs while compiling against klibc Olaf Hering: o ARCH detection for ppc Patrick Mansfield: o fix udev parallel builds with klibc Summary of changes from v006 to v007 ============================================ : o fix segfault in parsing bad udev.permissions file Greg Kroah-Hartman: o update default config file with a CALLOUT rule, and more documentation o updated the man page with the latest format specifier changes o added ability to put format specifiers in the CALLOUT program string o tweak udev-test.pl to report '0' errors if that's what happened o only build klibc_fixups.c if we are actually using klibc o add support for string group and string user names in udev.permissions o add getgrnam and getpwnam to klibc_fixups files o remove Makefile.klibc o add udev-test perl script from Kay Sievers which blows away my puny shell scripts o added debian's version of udev.permissions o change to 006_bk version Kay Sievers: o format char for CALLOUT output o more namedev whitespace cleanups o support arguments in callout exec o namedev.c - change order of fields in CALLOUT o namedev.c whitespace + debug text cleanup o man page with udev.permissions wildcard Olaf Hering: o static klibc udev does not link against crt0.o Summary of changes from v005 to v006 ============================================ : o faster test scripts Arnd Bergmann: o more robust config file parsing in namedev.c o add bus id modifier Daniel E. F. Stekloff: o patch for libsysfs sysfs directory handling Greg Kroah-Hartman: o add another line to udev.permissions in the proper format o tweak replace_test o fix permissions to work properly now o add real udev.permissions file to test directory o fix namedev.c to build with older version of gcc o add dumb test for all of the different modifiers o update the TODO list with more items that people can easily do o move the test.block and test.tty scripts to the test/ directory o add remove actions to the test scripts o turn DEBUG_PARSER off by default o add some documentation for the %b modifier to the default config file o fix make install rule for when the udev symlink is already there o change release target in makefile o change debug level on printf values for now o updated demo config file o add some documentation of the modifiers to the default config file o add demo config file o updated bk ignore list for klibc generated files o add printf option to label test to verify it works o fix up printf-like functionality due to previous changes o get the major/minor number before we name the device o add scsi_id "extra" program from Patrick Mansfield o Add multipath "extra" program from Christophe Varoqui, o trailing whitespace cleanups o splig LABEL and NUMBER into separate functions o add TOPO regression test o move TOPOLOGY rule to it's own function o fix bug where NUMBER and TOPOLOGY would not work for partitions o clean up the way we find the sysdevice for a block device for namedev o updated label test script (tests for partitions now.) o split REPLACE and CALLOUT into separate functions o add debug line for REPLACE call o add replace test o add more sysfs test tree files o change UDEV_SYSFS_PATH environment variable due to libsysfs change o fix bug in klibc's isspace function o fix udev-add.c to build properly with older versions of gcc o add prototype for ftruncate to klibc o Remove a few items from the TODO list that are already done o version number to 005_bk o pull some klibc stuff into the make Makefile to try to stay in sync o klibc build fixes Kay Sievers: o apply permissions.conf support for wildcard and default name o man page with included placeholder list o implement printf-like placeholder support for NAME o more manpage tweaks o add support for subdirs o add uid/gid to nodes Olaf Hering: o DESTDIR for udev Paul Mundt: o Fixup path for kernel includes when building with klibc Robert Love: o udev init script Summary of changes from v004 to v005 ============================================ : o namedev.c comments + debug patch o man page update Greg Kroah-Hartman: o ignore the klibc/linux symlink o add klibc linux symlink info to the README o get 'make release' to work properly again o added README info for how to build using klibc o turn off debugging if we are building with klibc o turn off debugging in namedev o added vsyslog support to klibc o add ftruncate to klibc o klibc specific tweaks o libsysfs does not need mntent.h in it's header file o udev build tweaks to tdb's spinlock code o klibc makefile changes o build tdb and libsysfs from the same makefile as udev o udev-add build cleanups for other libc versions o tweak tdb to build within udev better o make libsysfs spit debug messages to the same place as the rest of udev o make libsysfs build cleanly o updated bk ignore list o added klibc version 0.82 (cvs tree) to the udev tree o makefile fix for now o Merge greg@bucket:/home/greg/src/udev into kroah.com:/home/greg/src/udev o hm, makefile bug with so many files... will fix later o regression tests starting to be added o fix LABEL bug for device files (not class files.) o more warning flags to the build o got rid of struct device_attr o rename namedev.permissions and namedev.config to udev.permissions and udev.config o fix dbg line in namedev.c o more overrides of config info with env variables if in test mode o Fix bug causing udev to sleep forever waiting for dev file to show up o change version to 004_bk o make config files, sysfs root, and udev root configurable from config variables Robert Love: o udev: sleep_for_dev() bits o udev: another canidate for static Summary of changes from v003 to v004 ============================================ Daniel E. F. Stekloff: o new version of libsysfs patch Greg Kroah-Hartman: o 004 release o major database cleanups o Changed test.block and test.tty to take ACTION from the command line o don't sleep if 'dev' file is already present on device add o fix comment about how the "dev" file is made up o more database work. Now we only store the info we really need right now o add BUS= bug to TODO list so it will not get forgotten o spec file changes o test.block changes o ok, rpm likes the "_" character instead of "-" better o change the version to 003-bk to keep things sane with people using the bk tree o got "remove of named devices" working o fix segfaults when dealing with partitions Kay Sievers: o man file update o man page update Robert Love: o udev: mode should be mode_t o udev: trivial trivialities o udev: cool test scripts again o udev spec file symlink support o udev: cool test scripts o udev spec file bits Summary of changes from v0.2 to v003 ============================================ Daniel E. F. Stekloff: o udevdb patch o udevdb prototype Greg Kroah-Hartman: o update the spec file for the new version and install process o fix makefile release rule to not drop tdb.h file o Add FAQ for udev o removed AUTHORS and INSTALL files as they were pretty pointless o copyright updates o Add AUTHORS and INSTALL files o TODO updates o Updatd the README o updated the TODO list o add udev man page (basically just a place holder for now.) o added uninstall support o added install target for makefile so people don't have to do it by hand anymore o add version to debug log on startup o tell the user what mknod() we are trying to do o add dbg_parse() to cut down on parse file debugging statements o put config files and database in /etc/udev by default o add ols 2003 udev paper to docs/ o clean up some debugging stuff in namedev.c o do not build the tdb binary programs, only the objects o merge tdb into the build process o Added tdb code from latest cvs version in the samba tree o added my name to the .spec file o minor cleanups o cleanup the mknod code a bit o remove mknod callout o handle new major:minor format of dev files that showed up in 2.6.0-test2-bk3 or so o oops, everything was getting created as 000 mode, try to fix this up, but fail... o more test stuff Olaf Hering: o print udev pid Patrick Mansfield: o add callout config type to udev Paul Mundt: o Fix TDB cross compilation o udev spec file o udev/libsysfs cross compile fixes Summary of changes from v0.1 to v0.2 ============================================ Greg Kroah-Hartman: o more test stuff o removed unneeded stuff from udev.h o added 0.2 change log info o start working on label support, and fix some segfaults for block devices o test config file changes o add NUMBER support (basically same logic as TOPOLOGY, perhaps we should merge this...) o added topology support o got REPLACE to work properly o make struct config_device contain a struct device_attr instead of duplicating the mess o block test o split the tests up into different files o split udev main logic into udev-add and udev-remove o Clean up the namedev interface a bit, making the code smaller o bk: update ignore list o update the tests to handle block devices too o add initial libsysfs support o added libsysfs to the build o added libsysfs code from sysutils-0.1.1-071803 release o namedev config files are fully parsed o more permission tests o make log_message spit out warnings so I don't have to spend forever chasing down stupid bugs that aren't there... o added klibc makefile o Initial namedev parsing of config files o sleep for 2 seconds to give the kernel a chance to actually create the files we need o pick a better default UDEV_ROOT o fix up the test to actually work o added more documentation in README and TODO files Summary of changes up to v0.1 ============================================ Greg Kroah-Hartman: o added more documentation in README and TODO files o updated the documentation o cleaned up the makefile a bit o remove now works! o restructure code to be able to actually get remove_node() to work o Creating nodes actually works o added stupid test script for debugging o added initial documentation and gpl license o enabled debugging o updated ignore list o added initial files o fixed up config o Initial repository create o BitKeeper file /home/greg/src/udev/udev/ChangeSet