rules/gentoo/30-kernel-compat.rules

   1 # do not edit this file, it will be overwritten on update
   2
   3 ACTION!="add|change", GOTO="kernel_compat_end"
   4
   5 #
   6 # sysfs timing rules
   7 #
   8
   9 # needed for kernels <2.6.30
  10 SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", WAIT_FOR_SYSFS="descriptors"
  11
  12 #
  13 # naming device rules
  14 #
  15
  16 # dvb device naming
  17 # needed for kernels <2.6.29-rc1
  18 SUBSYSTEM=="dvb", ENV{DVB_ADAPTER_NUM}=="", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"
  19
  20 # naming rules for kernels <2.6.31
  21
  22 # alsa names
  23 KERNEL=="controlC[0-9]*",       NAME="snd/%k"
  24 KERNEL=="hwC[D0-9]*",           NAME="snd/%k"
  25 KERNEL=="pcmC[D0-9cp]*",        NAME="snd/%k"
  26 KERNEL=="midiC[D0-9]*",         NAME="snd/%k"
  27 KERNEL=="timer",                NAME="snd/%k"
  28 KERNEL=="seq",                  NAME="snd/%k"
  29
  30 KERNEL=="mwave",                NAME="modems/mwave"
  31
  32 KERNEL=="mouse*|mice|event*",   NAME="input/%k"
  33 KERNEL=="ts[0-9]*|uinput",      NAME="input/%k"
  34 KERNEL=="js[0-9]*",             NAME="input/%k"
  35
  36 KERNEL=="card[0-9]*",           NAME="dri/%k"
  37
  38 SUBSYSTEM=="dvb", ENV{DVB_ADAPTER_NUM}=="?*", NAME="dvb/adapter$env{DVB_ADAPTER_NUM}/$env{DVB_DEVICE_TYPE}$env{DVB_DEVICE_NUM}"
  39
  40 # libusb device nodes
  41 SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}"
  42
  43 # printer
  44 SUBSYSTEM=="usb",               KERNEL=="lp*", NAME="usb/%k"
  45
  46 # block
  47 KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%k"
  48 KERNEL=="pktcdvd", NAME="pktcdvd/control"
  49
  50 KERNEL=="rawctl", NAME="raw/rawctl"
  51 SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", NAME="raw/%k"
  52 SUBSYSTEM=="bsg", NAME="bsg/%k"
  53 SUBSYSTEM=="aoe", NAME="etherd/%k"
  54
  55 # network
  56 KERNEL=="tun",                  NAME="net/%k"
  57
  58 # CPU
  59 KERNEL=="cpu[0-9]*",            NAME="cpu/%n/cpuid"
  60 KERNEL=="msr[0-9]*",            NAME="cpu/%n/msr"
  61 KERNEL=="microcode",            NAME="cpu/microcode", MODE="0600"
  62
  63 # miscellaneous
  64 KERNEL=="auer[0-9]*",           NAME="usb/%k"
  65 KERNEL=="hw_random",            NAME="hwrng"
  66 KERNEL=="sxctl",                NAME="specialix_sxctl"
  67 KERNEL=="rioctl",               NAME="specialix_rioctl"
  68 KERNEL=="iowarrior[0-9]*",      NAME="usb/%k"
  69 KERNEL=="hiddev[0-9]*",         NAME="usb/%k"
  70 KERNEL=="legousbtower[0-9]*",   NAME="usb/%k"
  71 KERNEL=="dabusb[0-9]*",         NAME="usb/%k"
  72 KERNEL=="usbdpfp[0-9]*",        NAME="usb/%k"
  73 KERNEL=="cpad[0-9]*",           NAME="usb/%k"
  74
  75 # end of naming rules for kernel <2.6.31
  76
  77
  78 #
  79 # module loading rules
  80 #
  81 ACTION!="add", GOTO="kernel_compat_end"
  82
  83 # No need for more code, as MODALIAS is present
  84 ENV{MODALIAS}=="?*", GOTO="kernel_compat_end"
  85
  86 # needed for kernel <2.6.30-rc1
  87 SUBSYSTEM=="scsi", ATTR{type}=="8", RUN+="/sbin/modprobe -b ch"
  88 SUBSYSTEM=="mmc", RUN+="/sbin/modprobe -b mmc_block"
  89
  90 # needed for kernel <2.6.27-rc5
  91 # acpi will do on newer kernels
  92 SUBSYSTEM=="pnp", DRIVER!="?*", \
  93   RUN{ignore_error}+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"
  94
  95 LABEL="kernel_compat_end"