rules/debian/80-drivers.rules

   1 ACTION!="add", GOTO="hotplug_not_add_event"
   2
   3 # check if the device has already been claimed by a driver
   4 ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_driver_loaded"
   5
   6 # this driver is broken and should not be loaded automatically on kernels
   7 # < 2.6.21 (see #398962)
   8 SUBSYSTEM=="platform", ENV{MODALIAS}=="i82365", GOTO="hotplug_driver_loaded"
   9
  10 # load the drivers
  11 ENV{MODALIAS}=="?*", \
  12         RUN+="/sbin/modprobe --use-blacklist $env{MODALIAS}"
  13
  14 SUBSYSTEM=="pnp",       ENV{MODALIAS}!="?*", \
  15         RUN+="/bin/sh -c '/sbin/modprobe --use-blacklist --all $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"
  16
  17 SUBSYSTEM=="pcmcia_socket",                     RUN+="/sbin/modprobe pcmcia"
  18
  19 # rules for subsystems which lack proper hotplug support
  20 SUBSYSTEM=="i2o",                               RUN+="/sbin/modprobe i2o_block"
  21 SUBSYSTEM=="mmc",                               RUN+="/sbin/modprobe mmc_block"
  22 SUBSYSTEM=="memstick",  RUN+="/sbin/modprobe --all ms_block mspro_block"
  23 SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD",   RUN+="/sbin/modprobe tifm_sd"
  24 SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS",   RUN+="/sbin/modprobe tifm_ms"
  25
  26 # needed for kernels < 2.6.22
  27 SUBSYSTEM=="scsi_device", ATTRS{type}=="0|7|14", RUN+="/sbin/modprobe sd_mod"
  28 SUBSYSTEM=="scsi_device", ATTRS{type}=="1",     RUN+="/sbin/modprobe osst", \
  29         ATTRS{vendor}=="Onstream", ATTRS{model}!="ADR*"
  30 SUBSYSTEM=="scsi_device", ATTRS{type}=="1",     RUN+="/sbin/modprobe st", \
  31         ATTRS{vendor}=="Onstream", ATTRS{model}=="ADR*"
  32 SUBSYSTEM=="scsi_device", ATTRS{type}=="1",     RUN+="/sbin/modprobe st", \
  33         ATTRS{vendor}!="Onstream"
  34 SUBSYSTEM=="scsi_device", ATTRS{type}=="[45]",  RUN+="/sbin/modprobe sr_mod"
  35 SUBSYSTEM=="scsi_device", ATTRS{type}=="8",     RUN+="/sbin/modprobe ch"
  36
  37 SUBSYSTEM=="scsi_device", ATTRS{type}=="[235689]", TEST!="[module/sg]", \
  38                                                 RUN+="/sbin/modprobe sg"
  39
  40 SUBSYSTEM=="ide", ATTR{media}=="tape",          RUN+="/sbin/modprobe ide-scsi"
  41
  42 # From here on follows the hotplug agents which do not load modules
  43 LABEL="hotplug_driver_loaded"
  44
  45 # FIXME: does a sane default exist?
  46 #SUBSYSTEM=="scsi_device", ATTRS{idVendor}=="...", \
  47 #       RUN+="scsi-re-add"
  48
  49 SUBSYSTEM=="firmware",                          RUN+="firmware.agent"
  50
  51 LABEL="hotplug_not_add_event"
  52
  53 SUBSYSTEM=="net",                               RUN+="net.agent"
  54
  55 # Log every event to /dev/hotplug.log (for debugging).
  56 #RUN+="logger.agent"
  57