with some suitable options. Options and arguments after gbp-build
will be passed on to git-buildpackage.
+By default this uses \-\-quilt=gbp, so HEAD should be a
+git-buildpackage style branch, not a patches-applied branch.
+
Tagging, signing and actually uploading should be left to dgit push.
.TP
\fBdgit push\fR [\fIsuite\fP]
Valid with dgit fetch and dgit pull, only.
.TP
.BR --clean=git " | " -wg
-The source tree should be cleaned, before building a source package
-with one of the build options, using
-.BR "git clean -xdf" .
-This will delete all files which are not tracked by git. Also, -wg
-causes dgit to pass
-.B -nc
-to dpkg-buildpackage, which prevents the package's own clean target
-from being run.
-
---clean=git is useful when the package's clean target is troublesome;
-the downside is simply that git clean may delete files you forgot to
-git add. --clean=git can also avoid needing the build-dependencies.
+Use
+.BR "git clean -xdf"
+to clean the working tree,
+rather than running the package's rules clean target.
+
+This will delete all files which are not tracked by git.
+(Including any files you forgot to git add.)
+
+.BI --clean= ...
+options other than dpkg-source
+are useful when the package's clean target is troublesome, or
+to avoid needing the build-dependencies.
.TP
.BR --clean=git-ff " | " -wgf
-The source tree should be cleaned, before building a source package
-with one of the build options, using
-.BR "git clean -xdff" .
-This is like
-"git clean -xdf"
+Use
+.BR "git clean -xdff"
+to clean the working tree.
+Like
+git clean -xdf
but it also removes any subdirectories containing different git
trees (which only unusual packages are likely to create).
.TP
.BR --clean=check " | " -wc
Merely check that the tree is clean (does not contain uncommitted
-files), before building a source package.
+files).
+Avoids running rules clean,
+and can avoid needing the build-dependencies.
.TP
.BR --clean=none " | " -wn
-Do not clean the tree before building a source package. If there are
+Do not clean the tree, nor check that it is clean.
+Avoids running rules clean,
+and can avoid needing the build-dependencies.
+If there are
files which are not in git, or if the build creates such files, a
subsequent dgit push will fail.
.TP
.BR --clean=dpkg-source " | " -wd
Use dpkg-buildpackage to do the clean, so that the source package
is cleaned by dpkg-source running the package's clean target.
-This is the default. It requires the package's build dependencies.
+This is the default.
+Requires the package's build dependencies.
.TP
.BR --clean=dpkg-source-d " | " -wdd
Use
.B dpkg-buildpackage -d
-to do the clean, so that the source package
+to do the clean,
+so that the source package
is cleaned by dpkg-source running the package's clean target.
The build-dependencies are not checked (due to
.BR -d ),
Declare that you are deliberately doing
.IR something .
This can be used to override safety catches, including safety catches
-which relate to distro-specific policies. The meanings of
+which relate to distro-specific policies.
+The use of --deliberately is declared and published in the signed tags
+generated for you by dgit,
+so that the archive software can give effect to your intent,
+and
+for the benefit humans looking at the history.
+The meanings of
.IR something s
understood in the context of Debian are discussed below:
.TP
.TP
.BR --quilt=linear
When fixing up source format `3.0 (quilt)' metadata, insist on
-generating a linear patch stack. If such a stack cannot be generated,
-fail. This is the default for Debian.
+generating a linear patch stack: one new patch for each relevant
+commit.
+If such a stack cannot be generated, fail.
+This is the default for Debian.
+
+HEAD should be a series of plain commits
+(not touching debian/patches/),
+and pseudomerges,
+with as ancestor a patches-applied branch.
.TP
.BR --quilt=auto
When fixing up source format `3.0 (quilt)' metadata, prefer to
-generate a linear patch stack, but if that doesn't seem possible,
-generate a single squashed patch for all the changes made in git.
+generate a linear patch stack
+(as with --quilt=auto)
+but if that doesn't seem possible,
+try to generate a single squashed patch for all the changes made in git
+(as with --quilt=smash).
This is not a good idea for an NMU in Debian.
.TP
.BR --quilt=smash
When fixing up source format `3.0 (quilt)' metadata,
-generate a single squashed patch for all the changes made in git.
+generate a single additional patch for all the changes made in git.
This is not a good idea for an NMU in Debian.
+
+(If HEAD has any in-tree patches already, they must apply cleanly.
+This will be the case for any trees produced by dgit fetch or clone;
+if you do not change the upstream version
+nor make changes in debian/patches,
+it will remain true.)
.TP
.BR --quilt=nofix
Check whether source format `3.0 (quilt)' metadata would need fixing
fixing up. If you use this option and the metadata did in fact need
fixing up, dgit push will fail.
.TP
+.BR -- [ quilt= ] gbp " | " -- [ quilt= ] dpm " | " --quilt=unapplied
+Tell dgit that you are using a nearly-dgit-compatible git branch,
+aka a
+.BR "maintainer view" ,
+and
+do not want your branch changed by dgit.
+
+.B --gbp
+(short for
+.BR --quilt=gbp )
+is for use with git-buildpackage.
+Your HEAD is expected to be
+a patches-unapplied git branch, except that it might contain changes
+to upstream .gitignore files. This is the default for dgit gbp-build.
+
+.B --dpm
+(short for
+.BR --quilt=dpm )
+is for use with git-dpm.
+Your HEAD is expected to be
+a patches-applied git branch,
+except that it might contain changes to upstream .gitignore files.
+
+.B --quilt=unapplied
+specifies that your HEAD is a patches-unapplied git branch (and
+that any changes to upstream .gitignore files are represented as
+patches in debian/patches).
+
+With --quilt=gbp|dpm|unapplied,
+dgit push (or precursors like quilt-fixup and build) will automatically
+generate a conversion of your git branch into the right form.
+dgit push will push the
+dgit-compatible form (the
+.BR "dgit view" )
+to the dgit git server.
+The dgit view will be visible to you
+in the dgit remote tracking branches, but your own branch will
+not be modified.
+dgit push will create a tag
+.BI debian/ version
+for the maintainer view, and the dgit tag
+.BI archive/debian/ version
+for the dgit view.
+dgit quilt-fixup will merely do some checks,
+and cache the maintainer view.
+
+.B If you have a branch like this it is essential to specify the appropriate --quilt= option!
+This is because it is not always possible to tell: a patches-unapplied
+git branch of a package with one patch, for example, looks very like
+a patches-applied branch where the user has used git revert to
+undo the patch, expecting to actually revert it.
+However, if you fail to specify the right \-\-quilt option,
+and you aren't too lucky, dgit will notice the problem and stop,
+with a useful hint.
+.TP
+.BR -d "\fIdistro\fR | " --distro= \fIdistro\fR
+Specifies that the suite to be operated on is part of distro
+.IR distro .
+This overrides the default value found from the git config option
+.BR dgit-suite. \fIsuite\fR .distro .
+The only effect is that other configuration variables (used
+for accessing the archive and dgit-repos) used are
+.BR dgit-distro. \fIdistro\fR .* .
+
+If your suite is part of a distro that dgit already knows about, you
+can use this option to make dgit work even if your dgit doesn't know
+about the suite. For example, specifying
+.B -ddebian
+will work when the suite is an unknown suite in the Debian archive.
+
+To define a new distro it is necessary to define methods and URLs
+for fetching (and, for dgit push, altering) a variety of information both
+in the archive and in dgit-repos.
+How to set this up is not yet documented.
+.TP
+.BI -C changesfile
+Specifies the .changes file which is to be uploaded. By default
+dgit push looks for single .changes file in the parent directory whose
+filename suggests it is for the right package and version.
+
+If the specified
+.I changesfile
+pathname contains slashes, the directory part is also used as
+the value for
+.BR --build-products-dir ;
+otherwise, the changes file is expected in that directory (by
+default, in
+.BR .. ).
+.TP
+.B --rm-old-changes
+When doing a build, delete any changes files matching
+.IB package _ version _*.changes
+before starting. This ensures that
+dgit push (and dgit sbuild) will be able to unambigously
+identify the relevant changes files from the most recent build, even
+if there have been previous builds with different tools or options.
+The default is not to remove, but
+.B \-\-no-rm-old-changes
+can be used to override a previous \-\-rm-old-changes
+or the .rm-old-changes configuration setting.
+.TP
+.BI --build-products-dir= directory
+Specifies where to find the built files to be uploaded.
+By default, dgit looks in the parent directory
+.RB ( .. ).
+.TP
+.BI --no-rm-on-error
+Do not delete the destination directory if clone fails.
+.TP
.BI -D
Prints debugging information to stderr. Repeating the option produces
more output (currently, up to -DDDD is meaningfully different).
.RI \fB--ch:\fR option
Specifies a single additional option to pass, eventually, to
dpkg-genchanges.
-.TP
-.RI \fB--curl=\fR program " | \fB--dput=\fR" program " |..."
-Specifies alternative programs to use instead of
-.BR curl ,
-.BR dput ,
-.BR debsign ,
-.BR dpkg-source ,
-.BR dpkg-buildpackage ,
-.BR dpkg-genchanges ,
-.BR sbuild ,
-.BR gpg ,
-.BR ssh ,
-.BR dgit ,
-.BR git ,
-or
-.BR mergechanges .
-For dpkg-buildpackage, dpkg-genchanges, mergechanges and sbuild,
-this applies only when the program is invoked directly by dgit.
+Options which are safe to pass include
+.BR "-si -sa -sd -C" .
-For dgit, specifies the command to run on the remote host when dgit
-rpush needs to invoke a remote copy of itself. (dgit also reinvokes
-itself as the EDITOR for dpkg-source --commit; this is done using
-argv[0], and is not affected by --dgit=).
-
-For ssh, the default value is taken from the
-.B DGIT_SSH
-or
-.B GIT_SSH
-environment variables, if set (see below). And, for ssh, when accessing the
-archive and dgit-repos, this command line setting is overridden by the
-git config variables
-.BI dgit-distro. distro .ssh
-and
-.B .dgit.default.ssh
-(which can in turn be overridden with -c). Also, when dgit is using
-git to access dgit-repos, only git's idea of what ssh to use (eg,
-.BR GIT_SSH )
-is relevant.
+For other options the caveat below applies.
.TP
.RI \fB--curl:\fR option " | \fB--dput:\fR" option " |..."
Specifies a single additional option to pass to
.BR sbuild ,
.BR ssh ,
.BR dgit ,
+.BR gbp-pq ,
+.BR gbp-build ,
or
.BR mergechanges .
Can be repeated as necessary.
+Use of this ability should not normally be necessary.
+It is provided for working around bugs,
+or other unusual situations.
+If you use these options,
+you may violate dgit's assumptions
+about the behaviour of its subprograms
+and cause lossage.
+
For dpkg-buildpackage, dpkg-genchanges, mergechanges and sbuild,
-this applies only when the program is invoked directly by dgit.
+the option applies only when the program is invoked directly by dgit.
Usually, for passing options to dpkg-genchanges, you should use
.BR --ch: \fIoption\fR.
-Specifying --git not effective for some lower-level read-only git
+Specifying --git is not effective for some lower-level read-only git
operations performed by dgit, and also not when git is invoked by
another program run by dgit.
-See notes above regarding ssh and dgit.
+See notes below regarding ssh and dgit.
NB that --gpg:option is not supported (because debsign does not
have that facility).
.B keyid
distro config setting.
.TP
-.BR -d "\fIdistro\fR | " --distro= \fIdistro\fR
-Specifies that the suite to be operated on is part of distro
-.IR distro .
-This overrides the default value found from the git config option
-.BR dgit-suite. \fIsuite\fR .distro .
-The only effect is that other configuration variables (used
-for accessing the archive and dgit-repos) used are
-.BR dgit-distro. \fIdistro\fR .* .
+.RI \fB--curl=\fR program " | \fB--dput=\fR" program " |..."
+Specifies alternative programs to use instead of
+.BR curl ,
+.BR dput ,
+.BR debsign ,
+.BR dpkg-source ,
+.BR dpkg-buildpackage ,
+.BR dpkg-genchanges ,
+.BR sbuild ,
+.BR gpg ,
+.BR ssh ,
+.BR dgit ,
+.BR git ,
+.BR gbp-pq ,
+.BR gbp-build ,
+or
+.BR mergechanges .
-If your suite is part of a distro that dgit already knows about, you
-can use this option to make dgit work even if your dgit doesn't know
-about the suite. For example, specifying
-.B -ddebian
-will work when the suite is an unknown suite in the Debian archive.
+For
+.BR dpkg-buildpackage ,
+.BR dpkg-genchanges ,
+.B mergechanges
+and
+.BR sbuild ,
+this applies only when the program is invoked directly by dgit.
-To define a new distro it is necessary to define methods and URLs
-for fetching (and, for dgit push, altering) a variety of information both
-in the archive and in dgit-repos.
-How to set this up is not yet documented.
-.TP
-.BI -C changesfile
-Specifies the .changes file which is to be uploaded. By default
-dgit push looks for single .changes file in the parent directory whose
-filename suggests it is for the right package and version.
+For
+.BR dgit ,
+specifies the command to run on the remote host when dgit
+rpush needs to invoke a remote copy of itself. (dgit also reinvokes
+itself as the EDITOR for dpkg-source --commit; this is done using
+argv[0], and is not affected by --dgit=).
-If the specified
-.I changesfile
-pathname contains slashes, the directory part is also used as
-the value for
-.BR --build-products-dir ;
-otherwise, the changes file is expected in that directory (by
-default, in
-.BR .. ).
-.TP
-.B --rm-old-changes
-When doing a build, delete any changes files matching
-.IB package _ version _*.changes
-before starting. This ensures that
-dgit push (and dgit sbuild) will be able to unambigously
-identify the relevant changes files from the most recent build, even
-if there have been previous builds with different tools or options.
-The default is not to remove, but
-.B \-\-no-rm-old-changes
-can be used to override a previous \-\-rm-old-changes
-or the .rm-old-changes configuration setting.
-.TP
-.BI --build-products-dir= directory
-Specifies where to find the built files to be uploaded.
-By default, dgit looks in the parent directory
-.RB ( .. ).
+.BR gbp-build 's
+value
+is used instead of gbp build or git-buildpackage. (The default is
+the latter unless the former exists on PATH.)
+.BR gbp-pq 's
+value
+is used instead of gbp pq.
+In both cases,
+unusually, the specified value is split on whitespace
+to produce a command and possibly some options and/or arguments.
+
+For
+.BR ssh ,
+the default value is taken from the
+.B DGIT_SSH
+or
+.B GIT_SSH
+environment variables, if set (see below). And, for ssh, when accessing the
+archive and dgit-repos, this command line setting is overridden by the
+git config variables
+.BI dgit-distro. distro .ssh
+and
+.B .dgit.default.ssh
+(which can in turn be overridden with -c). Also, when dgit is using
+git to access dgit-repos, only git's idea of what ssh to use (eg,
+.BR GIT_SSH )
+is relevant.
.TP
.BI --existing-package= package
dgit push needs to canonicalise the suite name. Sometimes, dgit
after dgit finishes. The directory specified must be an absolute
pathname.
.TP
-.BI --no-rm-on-error
-Do not delete the destination directory if clone fails.
+.BI --force- something
+Instructs dgit to try to proceed despite detecting
+what it thinks is going to be a fatal problem.
+.B This is probably not going to work.
+These options are provided as an escape hatch,
+in case dgit is confused.
+(They might also be useful for testing error cases.)
+.TP
+.B --force-unrepresentable
+Carry on even if
+dgit thinks that your git tree contains changes
+(relative to your .orig tarballs)
+which dpkg-source is not able to represent.
+Your build or push will probably fail later.
+.TP
+.B --force-unsupported-source-format
+Carry on despite dgit not understanding your source package format.
+dgit will probably mishandle it.
+.TP
+.B --force-dsc-changes-mismatch
+Do not check whether .dsc and .changes match.
+The archive will probably reject your upload.
+.TP
+.BR --force-import-gitapply-absurd " | " --force-import-gitapply-no-absurd
+Force on or off the use of the absurd git-apply emulation
+when running gbp pq import
+when importing a package from a .dsc.
+See Debian bug #841867.
.SH WORKFLOW - SIMPLE
It is always possible with dgit to clone or fetch a package, make
changes in git (using git-commit) on the suite branch
non-dry-run dgit fetch first will help.
.SH SEE ALSO
\fBdgit\fP(7),
+\fBdgit-maint-merge\fP(7),
\fBcurl\fP(1),
\fBdput\fP(1),
\fBdebsign\fP(1),
~ianmdlvl / dgit.git / blobdiff