chiark / gitweb /
Ian Jackson [Sun, 14 Aug 2016 14:37:57 +0000 (15:37 +0100)]
lock-inframe-bracket: Fix front hole position
Ian Jackson [Sun, 14 Aug 2016 14:36:27 +0000 (15:36 +0100)]
lock-inframe-bracket: Improve overhang
Ian Jackson [Sun, 14 Aug 2016 14:36:06 +0000 (15:36 +0100)]
lock-inframe-bracket: Finer
Ian Jackson [Sun, 14 Aug 2016 14:31:30 +0000 (15:31 +0100)]
lock-inframe-bracket: Bracket
Ian Jackson [Sun, 14 Aug 2016 14:29:54 +0000 (15:29 +0100)]
lock-inframe-bracket: Adjust some thicknesses
Ian Jackson [Sun, 14 Aug 2016 14:27:51 +0000 (15:27 +0100)]
lock-inframe-bracket: ThroughHoles wip
Ian Jackson [Sun, 14 Aug 2016 14:07:31 +0000 (15:07 +0100)]
lock-inframe-bracket: MainPositive seem ok
Ian Jackson [Sun, 14 Aug 2016 13:55:41 +0000 (14:55 +0100)]
lock-inframe-bracket: ClipElevations seem ok
Ian Jackson [Sun, 14 Aug 2016 13:50:34 +0000 (14:50 +0100)]
lock-inframe-bracket: wip ClipElevations
Ian Jackson [Sun, 14 Aug 2016 13:43:21 +0000 (14:43 +0100)]
lock-inframe-bracket: rename pump to lock (wtf)
Ian Jackson [Sun, 14 Aug 2016 13:40:29 +0000 (14:40 +0100)]
pump-inframe-bracket: wip, have (most of) MainPlan
Ian Jackson [Sun, 14 Aug 2016 13:33:21 +0000 (14:33 +0100)]
pump-inframe-bracket: wip
Ian Jackson [Wed, 27 Jul 2016 17:19:34 +0000 (18:19 +0100)]
trackpump-mutlihead-clip: set some convexities
Ian Jackson [Tue, 26 Jul 2016 20:55:28 +0000 (21:55 +0100)]
cable-splice-clamp: adjustments for audio cable join upstairs
Ian Jackson [Tue, 26 Jul 2016 20:51:12 +0000 (21:51 +0100)]
cable-splice-clamp: move some other settings up in the file (nfc)
Ian Jackson [Sun, 24 Jul 2016 19:58:55 +0000 (20:58 +0100)]
earring-stand: make Demo into a toplevel
Ian Jackson [Sun, 24 Jul 2016 17:01:13 +0000 (18:01 +0100)]
trackpump-mutlihead-clip: commitid positive
Ian Jackson [Sun, 24 Jul 2016 16:59:53 +0000 (17:59 +0100)]
trackpump-mutlihead-clip: commitid
Ian Jackson [Sun, 24 Jul 2016 16:12:02 +0000 (17:12 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, seems done
Ian Jackson [Sun, 24 Jul 2016 16:08:49 +0000 (17:08 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, wip
Ian Jackson [Sun, 24 Jul 2016 15:58:05 +0000 (16:58 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, wip
Ian Jackson [Sun, 24 Jul 2016 15:52:40 +0000 (16:52 +0100)]
trackpump-mutlihead-clip: introduce a hull() (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:52:02 +0000 (16:52 +0100)]
trackpump-mutlihead-clip: move baseplate into PumpSide so it can be non-square (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:51:38 +0000 (16:51 +0100)]
trackpump-mutlihead-clip: lift out xm (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:42:45 +0000 (16:42 +0100)]
trackpump-mutlihead-clip: some tuning
Ian Jackson [Sun, 24 Jul 2016 15:40:37 +0000 (16:40 +0100)]
trackpump-mutlihead-clip: rename hose_side_stalk_width (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:39:06 +0000 (16:39 +0100)]
trackpump-mutlihead-clip: thinner hose stalk
Ian Jackson [Sun, 24 Jul 2016 15:36:31 +0000 (16:36 +0100)]
trackpump-mutlihead-clip: smaller baseplate
Ian Jackson [Sun, 24 Jul 2016 00:07:58 +0000 (01:07 +0100)]
earring-stand: commitid on base
Ian Jackson [Sun, 24 Jul 2016 00:02:48 +0000 (01:02 +0100)]
earring-stand: final fixes
Ian Jackson [Sat, 23 Jul 2016 23:59:14 +0000 (00:59 +0100)]
earring-stand: printables
Ian Jackson [Sat, 23 Jul 2016 23:56:11 +0000 (00:56 +0100)]
earring-stand: tuning
Ian Jackson [Sat, 23 Jul 2016 23:56:03 +0000 (00:56 +0100)]
earring-stand: abolish front_hex_x_fudge
Ian Jackson [Sat, 23 Jul 2016 23:53:34 +0000 (00:53 +0100)]
earring-stand: wip FrontPattern adjustments
Ian Jackson [Sat, 23 Jul 2016 23:50:13 +0000 (00:50 +0100)]
earring-stand: wip FrontPattern, and adjustments
Ian Jackson [Sat, 23 Jul 2016 23:38:06 +0000 (00:38 +0100)]
earring-stand: wip FrontPattern, break out totalh (nfc)
Ian Jackson [Sat, 23 Jul 2016 23:37:12 +0000 (00:37 +0100)]
earring-stand: wip FrontPattern
Ian Jackson [Sat, 23 Jul 2016 23:30:58 +0000 (00:30 +0100)]
earring-stand: break out FrontPattern (nfc)
Ian Jackson [Sat, 23 Jul 2016 23:22:16 +0000 (00:22 +0100)]
earring-stand: back tuning
Ian Jackson [Sat, 23 Jul 2016 23:22:11 +0000 (00:22 +0100)]
earring-stand: back pillars
Ian Jackson [Sat, 23 Jul 2016 23:21:35 +0000 (00:21 +0100)]
earring-stand: lift out thicks (nfc)
Ian Jackson [Sat, 23 Jul 2016 23:07:21 +0000 (00:07 +0100)]
earring-stand: back wip
Ian Jackson [Sat, 23 Jul 2016 23:07:14 +0000 (00:07 +0100)]
earring-stand: replace a -ppxl with eclip_wall_offset
Ian Jackson [Sat, 23 Jul 2016 23:06:59 +0000 (00:06 +0100)]
earring-stand: deal with some comments and formatting
Ian Jackson [Sat, 23 Jul 2016 23:06:35 +0000 (00:06 +0100)]
earring-stand: fix pr[0]
Ian Jackson [Sat, 23 Jul 2016 22:58:51 +0000 (23:58 +0100)]
earring-stand: adjust front height
Ian Jackson [Sat, 23 Jul 2016 22:58:44 +0000 (23:58 +0100)]
earring-stand: reorient top eclips
Ian Jackson [Sat, 23 Jul 2016 22:54:18 +0000 (23:54 +0100)]
earring-stand: fix ur
Ian Jackson [Sat, 23 Jul 2016 22:52:21 +0000 (23:52 +0100)]
earring-stand: remove some debug
Ian Jackson [Sat, 23 Jul 2016 22:51:53 +0000 (23:51 +0100)]
earring-stand: wip front
Ian Jackson [Sat, 23 Jul 2016 22:46:42 +0000 (23:46 +0100)]
earring-stand: base base
Ian Jackson [Sat, 23 Jul 2016 22:33:58 +0000 (23:33 +0100)]
earring-stand: 3d clips wip adjustments
Ian Jackson [Sat, 23 Jul 2016 19:00:21 +0000 (20:00 +0100)]
earring-stand: wip 3d clips in Joins
Ian Jackson [Sat, 23 Jul 2016 17:44:00 +0000 (18:44 +0100)]
earring-stand: try eclips other way round
Ian Jackson [Sat, 23 Jul 2016 17:41:45 +0000 (18:41 +0100)]
earring-stand: try bigger eclip_each_every
Ian Jackson [Sat, 23 Jul 2016 14:56:39 +0000 (15:56 +0100)]
earring-stand: wip new approach to panes
Ian Jackson [Sat, 23 Jul 2016 14:49:08 +0000 (15:49 +0100)]
earring-stand: adjust thinner prongs (from v1)
Ian Jackson [Sat, 23 Jul 2016 14:48:00 +0000 (15:48 +0100)]
earring-stand: adjust tighter (from v1)
Ian Jackson [Sat, 23 Jul 2016 14:47:48 +0000 (15:47 +0100)]
earring-stand: wip side_origins (sides)
Ian Jackson [Sat, 23 Jul 2016 14:32:22 +0000 (15:32 +0100)]
earring-stand: wip main Demo, fix rotation at Q
Ian Jackson [Sat, 23 Jul 2016 14:25:13 +0000 (15:25 +0100)]
earring-stand: wip main Demo
Ian Jackson [Sat, 23 Jul 2016 14:24:32 +0000 (15:24 +0100)]
earring-stand: rename to test demo TestPlanDemo
Ian Jackson [Sat, 23 Jul 2016 14:11:13 +0000 (15:11 +0100)]
earring-stand: introduce eclip_ra_offset (nfc)
Ian Jackson [Sat, 23 Jul 2016 13:51:23 +0000 (14:51 +0100)]
earring-stand: commitids on tests
Ian Jackson [Sat, 23 Jul 2016 13:44:20 +0000 (14:44 +0100)]
earring-stand: toplevels
Ian Jackson [Sat, 23 Jul 2016 13:41:27 +0000 (14:41 +0100)]
earring-stand: TestRAProtr looks good
Ian Jackson [Sat, 23 Jul 2016 13:38:08 +0000 (14:38 +0100)]
earring-stand: TestProtr looks good
Ian Jackson [Sat, 23 Jul 2016 13:37:56 +0000 (14:37 +0100)]
earring-stand: introduce test_len (nfc)
Ian Jackson [Sat, 23 Jul 2016 13:33:36 +0000 (14:33 +0100)]
earring-stand: TestBase good
Ian Jackson [Sat, 23 Jul 2016 13:22:55 +0000 (14:22 +0100)]
earring-stand: EclipRPlan good
Ian Jackson [Sat, 23 Jul 2016 13:17:21 +0000 (14:17 +0100)]
earring-stand: wip EclipRPlan
Ian Jackson [Sat, 23 Jul 2016 13:17:09 +0000 (14:17 +0100)]
earring-stand: wip EclipRPlan
Ian Jackson [Sat, 23 Jul 2016 13:16:50 +0000 (14:16 +0100)]
earring-stand: fix r1
Ian Jackson [Sat, 23 Jul 2016 13:11:54 +0000 (14:11 +0100)]
earring-stand: introduce test_main_th (nfc)
Ian Jackson [Sat, 23 Jul 2016 13:11:03 +0000 (14:11 +0100)]
earring-stand: reorg a bit, test alpha
Ian Jackson [Sat, 23 Jul 2016 13:06:20 +0000 (14:06 +0100)]
earring-stand: good EclipPPlanCore
Ian Jackson [Sat, 23 Jul 2016 12:53:20 +0000 (13:53 +0100)]
earring-stand: wip EclipPPlanCore
Ian Jackson [Sat, 23 Jul 2016 12:39:28 +0000 (13:39 +0100)]
earring-stand: use FArcSegment
Ian Jackson [Sat, 23 Jul 2016 12:29:56 +0000 (13:29 +0100)]
earring-stand: before use FArcSegment
Ian Jackson [Fri, 22 Jul 2016 21:16:06 +0000 (22:16 +0100)]
trackpump-mutlihead-clip: print right way up
Ian Jackson [Fri, 22 Jul 2016 21:15:37 +0000 (22:15 +0100)]
trackpump-mutlihead-clip: new hose side, commit to it
Ian Jackson [Fri, 22 Jul 2016 20:31:28 +0000 (21:31 +0100)]
trackpump-mutlihead-clip: new hose side test
Ian Jackson [Fri, 22 Jul 2016 20:27:59 +0000 (21:27 +0100)]
trackpump-mutlihead-clip: wip new hose side plan
Ian Jackson [Fri, 22 Jul 2016 20:20:43 +0000 (21:20 +0100)]
trackpump-mutlihead-clip: wip new hose side plan
Ian Jackson [Fri, 22 Jul 2016 16:05:21 +0000 (17:05 +0100)]
trackpump-mutlihead-clip: adjust slope to avoid making unwanted support
Ian Jackson [Fri, 22 Jul 2016 16:03:04 +0000 (17:03 +0100)]
trackpump-mutlihead-clip: sizes sound good
Ian Jackson [Fri, 22 Jul 2016 16:02:13 +0000 (17:02 +0100)]
trackpump-mutlihead-clip: shape is good
Ian Jackson [Fri, 22 Jul 2016 15:40:26 +0000 (16:40 +0100)]
trackpump-mutlihead-clip: HoseSideElevation seems good
Ian Jackson [Fri, 22 Jul 2016 15:31:20 +0000 (16:31 +0100)]
trackpump-mutlihead-clip: finer
Ian Jackson [Fri, 22 Jul 2016 15:27:50 +0000 (16:27 +0100)]
trackpump-mutlihead-clip: pumpside mostly done
Ian Jackson [Fri, 22 Jul 2016 15:23:48 +0000 (16:23 +0100)]
trackpump-mutlihead-clip: wip pumpside
Ian Jackson [Fri, 22 Jul 2016 15:16:14 +0000 (16:16 +0100)]
trackpump-mutlihead-clip: more elevation
Ian Jackson [Fri, 22 Jul 2016 14:59:54 +0000 (15:59 +0100)]
trackpump-mutlihead-clip: introduce baseplate
Ian Jackson [Fri, 22 Jul 2016 14:55:48 +0000 (15:55 +0100)]
trackpump-mutlihead-clip: wip
Ian Jackson [Fri, 22 Jul 2016 14:44:48 +0000 (15:44 +0100)]
trackpump-mutlihead-clip: wip
Ian Jackson [Sun, 19 Jun 2016 19:53:15 +0000 (20:53 +0100)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play
Ian Jackson [Sun, 19 Jun 2016 19:50:32 +0000 (20:50 +0100)]
brompton-computer-guard: move holes slightly
The base web was found to be on the wrong side; I fixed this by
turning the whole thing round. Move the base web, and turn it round.
This is a 2nd attempt to deal with the problem addressed by
0fe8aba40e7d "swap holes, to make web be on other side"
Ian Jackson [Sun, 19 Jun 2016 19:44:44 +0000 (20:44 +0100)]
Revert "brompton-computer-guard: swap holes, to make web be on other side"
That's totally wrong. It produces a widget which can't be mounted.
The bug is, effectively, that the base wants to be on the other side.
That does involve sort of swapping the ends, but not like this.
This reverts commit
0fe8aba40e7d868e9d60a8af34933e392b8f108c.
Ian Jackson [Sun, 19 Jun 2016 17:48:20 +0000 (18:48 +0100)]
brompton-computer-guard: make chunkier
Ian Jackson [Sun, 19 Jun 2016 17:47:24 +0000 (18:47 +0100)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play
~ianmdlvl / reprap-play.git / log