From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Thu, 29 Nov 2012 01:37:21 +0000 (+0000)
Subject: slic3r-config: increase temperatures since first try at anke-gps-bracket,GpsBody... 
X-Git-Tag: filamentspool-v2-release~654
X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=ce9c141971cc123a872f3afa5f898cd9052bf1a0;p=reprap-play.git

slic3r-config: increase temperatures since first try at anke-gps-bracket,GpsBody warped
---

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 03cb4bd..723db42 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.1 on Sat Nov 24 21:15:49 2012
+# generated by Slic3r 0.9.1 on Thu Nov 29 00:42:51 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 100
+bed_temperature = 110
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 90
+first_layer_bed_temperature = 100
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%