From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Thu, 5 Nov 2020 18:05:33 +0000 (+0000)
Subject: scaffold-clamp: wip
X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=bab97cae592d5df01c795dd82c47a555ffd6b880;p=reprap-play.git

scaffold-clamp: wip

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
---

diff --git a/scaffold-clamp.scad b/scaffold-clamp.scad
index ed3ed4a..730dfaf 100644
--- a/scaffold-clamp.scad
+++ b/scaffold-clamp.scad
@@ -1,13 +1,20 @@
 // -*- C -*-
 
+include <utils.scad>
+
 tube_dia = 48.3;
 
-th = 6;
+th = 7;
 
 pin_gap = 1.0; // around
 
 smooth_r = 10;
 
+bolt_dia = 5 + 0.75;
+bolt_flat = 10 + 1;
+
+open_gap = 10;
+
 // calculated
 
 pin_dia = th;
@@ -16,15 +23,26 @@ hole_dia = th + pin_gap;
 hinge_o_r = 0.5 * hole_dia + th;
 
 hinge_x = -0.5 * tube_dia - hinge_o_r;
+bolt_x = 0.5 * tube_dia + bolt_flat * 0.5;
+max_x = bolt_x + max(0.5 + bolt_dia + th, 0.5 * bolt_flat/2);
+
+flats_y = open_gap/2 + th;
 
 $fa = 3;
 $fs = 0.1;
 
 module Plan() {
-  offset(r=-smooth_r) offset(delta=smooth_r)
-  union(){
-    translate([hinge_x, 0]) circle(r= hinge_o_r);
-    circle(r = tube_dia/2 + th);
+  difference(){
+    offset(r=-smooth_r) offset(delta=smooth_r)
+      union(){
+      translate([hinge_x, 0]) circle(r= hinge_o_r);
+      circle(r = tube_dia/2 + th);
+      rectfromto([0,           -flats_y],
+		 [max_x,       +flats_y]);
+    }
+    circle(r = tube_dia/2);
+    rectfromto([0,       -open_gap/2],
+	       [max_x+1, +open_gap/2]);
   }
 }