From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Mon, 30 Jun 2025 16:03:54 +0000 (+0100)
Subject: fairphone5-case: Rename "microusb"
X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=97c231a233abb125acddf658bd39ecf87bc5a55f;p=reprap-play.git

fairphone5-case: Rename "microusb"

This was already wrong for FP4.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
---

diff --git a/fairphone5-case.scad b/fairphone5-case.scad
index 08263bb..b048418 100644
--- a/fairphone5-case.scad
+++ b/fairphone5-case.scad
@@ -147,9 +147,9 @@ lanyard_channel_len = 8;
 bottomspeaker_size = [ 11.35, 1.90 ] + [1,1] * 0.5;
 bottomspeaker_pos = [ 19.00, 5.17 ]; // from rhs, from top
 
-microusb_above = 1.64 - 0.25;
-microusb_below = 2.42;
-microusb_width = 12.40 + 1.25;
+usbc_above = 1.64 - 0.25;
+usbc_below = 2.42;
+usbc_width = 12.40 + 1.25;
 
 case_th_bottom = 2.5;
 case_th_lid = 3.0;
@@ -841,14 +841,14 @@ module OrdinaryRearAperture(rhs,bot, pos){
     children();
 }
 
-module MicroUSBEtc(){
+module UsbConnectorEtc(){
   Flip_bot(1){
     rotate([90,0,0])
       mirror([0,0,1])
       linextr(-epp2i[0], 60)
       translate([0.5 * phone_width, 0, 0])
-      rectfromto([-microusb_width/2, epp2i[1] + microusb_below],
-		 [+microusb_width/2, epp0[1] + -microusb_above]);
+      rectfromto([-usbc_width/2, epp2i[1] + usbc_below],
+		 [+usbc_width/2, epp0[1] + -usbc_above]);
   }
 }
 
@@ -1186,7 +1186,7 @@ module Case(){ ////toplevel
     OrdinaryRearApertures();
     NotInTestFrameRearApertures();
 
-    MicroUSBEtc();
+    UsbConnectorEtc();
 
     // gaps for the lid's hinge arms
     if (!$suppress_hinge) {
@@ -1335,20 +1335,20 @@ module HingeLever(){ ////toplevel
 
 		     x
 		     * ( (hex24 + hinge_over_nut_plate) -
-			 (phone_width/2 - microusb_width/2)
+			 (phone_width/2 - usbc_width/2)
 			)
-		     / ( (epp0[1] - microusb_above)
+		     / ( (epp0[1] - usbc_above)
 			 -
 			 (hppB[1] - hp_r2) ),
 
-		     x * (epp0[1] - microusb_above)
+		     x * (epp0[1] - usbc_above)
 
 		      ],
 		    [ 0,1,0, 0 ],
 		    [ 0,0,1, 0 ]]) {
 	  union(){
-	    MicroUSBEtc();
-	    Flip_hinge() MicroUSBEtc();
+	    UsbConnectorEtc();
+	    Flip_hinge() UsbConnectorEtc();
 	  }
 	}
       }