From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Thu, 9 Aug 2012 17:15:51 +0000 (+0100)
Subject: Refresh of motion-control-max-min
X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=5f910ec921400b18e6caca1dfc88aa338a14861f;p=marlin.git

Refresh of motion-control-max-min
---

diff --git a/Marlin/motion_control.cpp b/Marlin/motion_control.cpp
index f11d8c8..a10d73f 100644
--- a/Marlin/motion_control.cpp
+++ b/Marlin/motion_control.cpp
@@ -126,15 +126,15 @@ void mc_arc(float *position, float *target, float *offset, uint8_t axis_0, uint8
     arc_target[E_AXIS] += extruder_per_segment;
 
     if (min_software_endstops) {
-      if (arc_target[X_AXIS] < X_HOME_POS) arc_target[X_AXIS] = X_HOME_POS;
-      if (arc_target[Y_AXIS] < Y_HOME_POS) arc_target[Y_AXIS] = Y_HOME_POS;
-      if (arc_target[Z_AXIS] < Z_HOME_POS) arc_target[Z_AXIS] = Z_HOME_POS;
+      if (arc_target[X_AXIS] < X_MIN_POS) arc_target[X_AXIS] = X_MIN_POS;
+      if (arc_target[Y_AXIS] < Y_MIN_POS) arc_target[Y_AXIS] = Y_MIN_POS;
+      if (arc_target[Z_AXIS] < Z_MIN_POS) arc_target[Z_AXIS] = Z_MIN_POS;
     }
 
     if (max_software_endstops) {
-      if (arc_target[X_AXIS] > X_MAX_LENGTH) arc_target[X_AXIS] = X_MAX_LENGTH;
-      if (arc_target[Y_AXIS] > Y_MAX_LENGTH) arc_target[Y_AXIS] = Y_MAX_LENGTH;
-      if (arc_target[Z_AXIS] > Z_MAX_LENGTH) arc_target[Z_AXIS] = Z_MAX_LENGTH;
+      if (arc_target[X_AXIS] > X_MAX_POS) arc_target[X_AXIS] = X_MAX_POS;
+      if (arc_target[Y_AXIS] > Y_MAX_POS) arc_target[Y_AXIS] = Y_MAX_POS;
+      if (arc_target[Z_AXIS] > Z_MAX_POS) arc_target[Z_AXIS] = Z_MAX_POS;
     }
     plan_buffer_line(arc_target[X_AXIS], arc_target[Y_AXIS], arc_target[Z_AXIS], arc_target[E_AXIS], feed_rate, extruder);