retraction_enable = True
solid_layer_thickness = 1.2
fill_density = 30
+perimeter_before_infill = True
nozzle_size = .6
print_speed = 20
-print_temperature = 240
+print_temperature = 230
print_temperature2 = 0
print_temperature3 = 0
print_temperature4 = 0
+print_temperature5 = 0
print_bed_temperature = 110
support = None
platform_adhesion = None
filament_diameter2 = 2.89
filament_diameter3 = 0
filament_diameter4 = 0
+filament_diameter5 = 0
filament_flow = 100.0
retraction_speed = 10
retraction_amount = 1
raft_base_linewidth = 0.7
raft_interface_thickness = 0.2
raft_interface_linewidth = 0.2
+raft_airgap_all = 0.0
raft_airgap = 0.22
raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
fix_horrible_union_all_type_a = False
fix_horrible_union_all_type_b = False
fix_horrible_use_open_bits = False
.
object_center_x = -1
object_center_y = -1
+simplemodesettings =
+simplemodeprofile = Standard
+simplemodematerial = PLA
+simplemodematerialtype = Beginner
[alterations]
start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
G28 ; home all
M109 S140 ; set to cleaning temp and wait
G1 Z150 E-30 F75 ; suck up XXmm of filament
- M109 S160 ; heat up rest of way
+ M109 S150 ; heat up rest of way
G1 X45 Y174 F11520 ; move behind scraper
G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper
G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad
G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area
G1 Z10 ; raise z
G28 X0 Y0 ; home x and y
- M109 S160 ; set to probing temp
+ M109 S150 ; set to probing temp
M204 S300 ; Set probing acceleration
G29 ; Probe
M204 S2000 ; Restore standard acceleration
print_temperature5 = 0
print_bed_temperature = 0
support = None
-platform_adhesion = Brim
+platform_adhesion = None
support_dual_extrusion = Both
wipe_tower = False
wipe_tower_volume = 15
simplemodesettings =
simplemodeprofile = 2_normal
simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
[alterations]
start.gcode = ;Sliced at: {day} {date} {time}
G1 F{travel_speed} ; set travel speed
M203 X192 Y208 Z3 ; speed limits
M117 Printing... ; send message to LCD
-
end.gcode = M400
M104 S0 ; hotend off
M140 S0 ; heated bed heater off (if you have it)
print_temperature5 = 0
print_bed_temperature = 0
support = None
-platform_adhesion = Brim
+platform_adhesion = None
support_dual_extrusion = Both
wipe_tower = False
wipe_tower_volume = 15
simplemodesettings =
simplemodeprofile = 3_high
simplemodematerial = 1_hips
+simplemodematerialtype = Beginner
[alterations]
start.gcode = ;Sliced at: {day} {date} {time}