bike-lipo-box: arcy corners seem good now

diff --git a/bike-lipo-box.scad.m4 b/bike-lipo-box.scad.m4
index a468a1592cd781473ad8b60b204609650cdb707a..5188761b127ffc84f7cdcae0c55027a1ef293bc7 100644 (file)
--- a/bike-lipo-box.scad.m4
+++ b/bike-lipo-box.scad.m4
@@ -1,6 +1,7 @@
 // -*- C -*-
 
 include <commitid.scad>
+include <utils.scad>
 
 pxp6012_rad = 22.5 / 2 + 0.5;
 pxp6012_rad_outer = 32.0 / 2 - 0.5;
@@ -62,7 +63,7 @@ ts_wall = [wallthick,wallthick,ts_floorceil];
 ts_xbox = 20;
 ts_ybox = 15;
 ts_cnrrad = 5;
-ts_zbox = 20;
+ts_zbox = 15;
 
 ts_innertube = 0.1;
 
@@ -85,15 +86,25 @@ m4_define(`BoxPart_Extrude_Linear',`
     }
 ')
 
-m4_dnl BoxPart_Extrude_Arc(outer_radius, swept_angle, `profile(...);')
+m4_dnl BoxPart_Extrude_Arc(x0_radius, swept_angle, `profile(...);')
 m4_dnl  arc starting at transl_x, transl_y, moving towards positive
-m4_dnl  y at first and then bending towards positive x, until
+m4_dnl  y at first and then bending towards negative x, until
+m4_dnl  use negative x0_radius to inciate bending towards positive x
 m4_dnl  swept_angle is reached
+m4_dnl  x0_radius is the radius of the extruded part at x=0, not of the box
 m4_define(`BoxPart_Extrude_Arc',`
-  translate([+($1),0,0])
-    rotate_extrude(angle=($2), convexity=10, $fs=1, $fn=36)
-    translate([-($1),0,0]) {
-      $3
+  translate([-($1),0,0])
+    intersection(){
+      translate([0,0,-500])
+        linear_extrude(height=1000)
+        scale(500)
+        mirror([($1)<0, 0,0])
+        FArcSegment_mask($2);
+      rotate_extrude(convexity=10, $fs=1, $fn=36)
+        mirror([($1)<0, 0,0])
+        translate([+($1),0,0]){
+          $3
+        }
     }
 ')
 
@@ -103,13 +114,13 @@ ts_ybox_lin = ts_ybox - ts_cnrrad*2;
 m4_dnl TestSealDoBoxShape(`profile(profileargs)');
 m4_define(`TestSealDoBoxShape',`
   Box_Part(0,               ts_cnrrad,    0,0, Linear,`ts_ybox_lin', `$1' )
-  Box_Part(0, ts_ybox-ts_cnrrad,          0,0, Arc,`ts_cnrrad,90'  , `$1' )
+  Box_Part(0, ts_ybox-ts_cnrrad,          0,0, Arc,`-ts_cnrrad,90' , `$1' )
   Box_Part(ts_cnrrad,       ts_ybox,    -90,0, Linear,`ts_xbox_lin', `$1' )
-  Box_Part(ts_xbox-ts_cnrrad, ts_ybox,  -90,0, Arc,`ts_cnrrad,90'  , `$1' )
+  Box_Part(ts_xbox-ts_cnrrad, ts_ybox,  -90,0, Arc,`-ts_cnrrad,90' , `$1' )
   Box_Part(ts_xbox, ts_ybox-ts_cnrrad, -180,0, Linear,`ts_ybox_lin', `$1' )
-  Box_Part(ts_xbox,         ts_cnrrad, -180,0, Arc,`ts_cnrrad,90'  , `$1' )
+  Box_Part(ts_xbox,         ts_cnrrad, -180,0, Arc,`-ts_cnrrad,90' , `$1' )
   Box_Part(ts_xbox-ts_cnrrad, 0,       -270,0, Linear,`ts_xbox_lin', `$1' )
-  Box_Part(ts_cnrrad,         0,       -270,0, Arc,`ts_cnrrad,90'  , `$1' )
+  Box_Part(ts_cnrrad,         0,       -270,0, Arc,`-ts_cnrrad,90' , `$1' )
 ')
 
 m4_dnl '
@@ -127,4 +138,4 @@ module TestSealBox(){
 //TestWall();
 //TestSealWallProfile();
 TestSealBox();
-
+//FArcSegment_mask(350);