Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
foldover_gap = 0.50;
foldover_lever_gap = 0.50;
foldover_gap = 0.50;
foldover_lever_gap = 0.50;
+// properties of the hinge fasteners
hingescrew_shaft_dia = 2.0 + 0.25; // M2 x 12mm machine screw
hingescrew_shaft_len = 12;
hingescrew_fasteners_extra_thick = 0.40;
hingescrew_shaft_dia = 2.0 + 0.25; // M2 x 12mm machine screw
hingescrew_shaft_len = 12;
hingescrew_fasteners_extra_thick = 0.40;
+// ^ amount of thread protruding if everything was completely nominal
+// and we are using two nuts
hingescrew_nut_access_dia = 4.72 + 0.50;
// ^ washer is 4.72 dia
// also, want to get pliers or tiny spanner in to do up locknut
hingescrew_nut_access_dia = 4.72 + 0.50;
// ^ washer is 4.72 dia
// also, want to get pliers or tiny spanner in to do up locknut
hingescrew_nut_thick = 1.93;
hingescrew_head_th = 1.38 + 0.75;
hingescrew_head_dia = 3.92;
hingescrew_nut_thick = 1.93;
hingescrew_head_th = 1.38 + 0.75;
hingescrew_head_dia = 3.92;
+
+hingescrew_nut_recess_portion = 2/3; // portion of nut in recess
+
lever_cover_th = 0.75;
hingemount_th = 2.5;
hingemount_wd = 4.8725;
lever_cover_th = 0.75;
hingemount_th = 2.5;
hingemount_wd = 4.8725;
-hingescrew_nut_recess_portion = 2/3; // portion of nut in recess
-