X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=src%2Fsystemctl%2Fsystemctl.c;h=545d7e13951dff06253d970404348ca10fdc4fbe;hb=aae9a96d4b3a8562af9e8c6a23871b442645b954;hp=62c32cd31a7ae7f74a31f3729dd57cbc0c1776a0;hpb=08ace05beb1d09b6ebc5e9cafc2b972b39fa2437;p=elogind.git diff --git a/src/systemctl/systemctl.c b/src/systemctl/systemctl.c index 62c32cd31..545d7e139 100644 --- a/src/systemctl/systemctl.c +++ b/src/systemctl/systemctl.c @@ -123,7 +123,6 @@ static enum transport { TRANSPORT_POLKIT } arg_transport = TRANSPORT_NORMAL; static const char *arg_host = NULL; -static bool arg_follow = false; static unsigned arg_lines = 10; static OutputMode arg_output = OUTPUT_SHORT; @@ -132,26 +131,8 @@ static bool private_bus = false; static int daemon_reload(DBusConnection *bus, char **args); static void halt_now(enum action a); -static bool on_tty(void) { - static int t = -1; - - /* Note that this is invoked relatively early, before we start - * the pager. That means the value we return reflects whether - * we originally were started on a tty, not if we currently - * are. But this is intended, since we want colour and so on - * when run in our own pager. */ - - if (_unlikely_(t < 0)) - t = isatty(STDOUT_FILENO) > 0; - - return t; -} - static void pager_open_if_enabled(void) { - /* Cache result before we open the pager */ - on_tty(); - if (arg_no_pager) return; @@ -186,6 +167,14 @@ static void polkit_agent_open_if_enabled(void) { } #endif +static const char *ansi_highlight(bool b) { + + if (!on_tty()) + return ""; + + return b ? ANSI_HIGHLIGHT_ON : ANSI_HIGHLIGHT_OFF; +} + static const char *ansi_highlight_red(bool b) { if (!on_tty()) @@ -372,15 +361,6 @@ static void output_units_list(const struct unit_info *unit_infos, unsigned c) { } else id_len = max_id_len; - if (!arg_no_legend) { - printf("%-*s %-6s %-*s %-*s %-*s ", id_len, "UNIT", "LOAD", - active_len, "ACTIVE", sub_len, "SUB", job_len, "JOB"); - if (!arg_full && arg_no_pager) - printf("%.*s\n", desc_len, "DESCRIPTION"); - else - printf("%s\n", "DESCRIPTION"); - } - for (u = unit_infos; u < unit_infos + c; u++) { char *e; const char *on_loaded, *off_loaded; @@ -389,6 +369,15 @@ static void output_units_list(const struct unit_info *unit_infos, unsigned c) { if (!output_show_unit(u)) continue; + if (!n_shown && !arg_no_legend) { + printf("%-*s %-6s %-*s %-*s %-*s ", id_len, "UNIT", "LOAD", + active_len, "ACTIVE", sub_len, "SUB", job_len, "JOB"); + if (!arg_full && arg_no_pager) + printf("%.*s\n", desc_len, "DESCRIPTION"); + else + printf("%s\n", "DESCRIPTION"); + } + n_shown++; if (streq(u->load_state, "error")) { @@ -420,17 +409,28 @@ static void output_units_list(const struct unit_info *unit_infos, unsigned c) { } if (!arg_no_legend) { - printf("\nLOAD = Reflects whether the unit definition was properly loaded.\n" - "ACTIVE = The high-level unit activation state, i.e. generalization of SUB.\n" - "SUB = The low-level unit activation state, values depend on unit type.\n" - "JOB = Pending job for the unit.\n"); + const char *on, *off; + + if (n_shown) { + printf("\nLOAD = Reflects whether the unit definition was properly loaded.\n" + "ACTIVE = The high-level unit activation state, i.e. generalization of SUB.\n" + "SUB = The low-level unit activation state, values depend on unit type.\n" + "JOB = Pending job for the unit.\n\n"); + on = ansi_highlight(true); + off = ansi_highlight(false); + } else { + on = ansi_highlight_red(true); + off = ansi_highlight_red(false); + } if (arg_all) - printf("\n%u loaded units listed.\n" - "To show all installed unit files use 'systemctl list-unit-files'.\n", n_shown); + printf("%s%u loaded units listed.%s\n" + "To show all installed unit files use 'systemctl list-unit-files'.\n", + on, n_shown, off); else - printf("\n%u loaded units listed. Pass --all to see loaded but inactive units, too.\n" - "To show all installed unit files use 'systemctl list-unit-files'.\n", n_shown); + printf("%s%u loaded units listed.%s Pass --all to see loaded but inactive units, too.\n" + "To show all installed unit files use 'systemctl list-unit-files'.\n", + on, n_shown, off); } } @@ -1445,7 +1445,7 @@ static void check_triggering_units( DBusConnection *bus, const char *unit_name) { - DBusMessage _cleanup_dbus_msg_unref_ *reply = NULL; + _cleanup_dbus_message_unref_ DBusMessage *reply = NULL; DBusMessageIter iter, sub; char *service_trigger = NULL; const char *interface = "org.freedesktop.systemd1.Unit", @@ -1523,7 +1523,7 @@ static int start_unit_one( DBusError *error, Set *s) { - DBusMessage _cleanup_dbus_msg_unref_ *reply = NULL; + _cleanup_dbus_message_unref_ DBusMessage *reply = NULL; const char *path; int r; _cleanup_free_ char *n, *p = NULL; @@ -2274,9 +2274,9 @@ static void print_status_info(UnitStatusInfo *i) { if (i->id && arg_transport != TRANSPORT_SSH) { int flags = arg_all * OUTPUT_SHOW_ALL | - arg_follow * OUTPUT_FOLLOW | - !arg_quiet * OUTPUT_WARN_CUTOFF | - on_tty() * OUTPUT_COLOR; + (!on_tty() || pager_have()) * OUTPUT_FULL_WIDTH | + on_tty() * OUTPUT_COLOR | + !arg_quiet * OUTPUT_WARN_CUTOFF; printf("\n"); show_journal_by_unit(stdout, @@ -3575,7 +3575,15 @@ static int mangle_names(char **original_names, char ***mangled_names) { i = l; STRV_FOREACH(name, original_names) { - *i = unit_name_mangle(*name); + + /* When enabling units qualified path names are OK, + * too, hence allow them explicitly. */ + + if (is_path(*name)) + *i = strdup(*name); + else + *i = unit_name_mangle(*name); + if (!*i) { strv_free(l); return log_oom(); @@ -3918,9 +3926,8 @@ static int systemctl_help(void) { " --root=PATH Enable unit files in the specified root directory\n" " --runtime Enable unit files only temporarily until next reboot\n" " -n --lines=INTEGER Journal entries to show\n" - " --follow Follow journal\n" " -o --output=STRING Change journal output mode (short, short-monotonic,\n" - " verbose, export, json, json-pretty, cat)\n\n" + " verbose, export, json, json-pretty, json-sse, cat)\n\n" "Unit Commands:\n" " list-units List loaded units\n" " start [NAME...] Start (activate) one or more units\n" @@ -4074,7 +4081,6 @@ static int systemctl_parse_argv(int argc, char *argv[]) { ARG_NO_ASK_PASSWORD, ARG_FAILED, ARG_RUNTIME, - ARG_FOLLOW, ARG_FORCE }; @@ -4108,7 +4114,6 @@ static int systemctl_parse_argv(int argc, char *argv[]) { { "privileged",no_argument, NULL, 'P' }, { "runtime", no_argument, NULL, ARG_RUNTIME }, { "lines", required_argument, NULL, 'n' }, - { "follow", no_argument, NULL, ARG_FOLLOW }, { "output", required_argument, NULL, 'o' }, { NULL, 0, NULL, 0 } }; @@ -4228,14 +4233,8 @@ static int systemctl_parse_argv(int argc, char *argv[]) { arg_force ++; break; - case ARG_FOLLOW: - arg_follow = true; - break; - case 'f': - /* -f is short for both --follow and --force! */ arg_force ++; - arg_follow = true; break; case ARG_NO_RELOAD: