X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=slic3r-config.ini;h=e16204935c8d082ae5a0b60256a5c72118d20b04;hb=21c7f62c96589454bed45df57180d5e5d9c77082;hp=f77a8f13dd7af8f072bc6a920230c1b7f4fe568b;hpb=cc86ca9bde73d96a3bf00bb65d0d0d776f9495be;p=reprap-play.git

diff --git a/slic3r-config.ini b/slic3r-config.ini
index f77a8f1..e162049 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,6 +1,6 @@
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 85
+bed_temperature = 70
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -24,11 +24,11 @@ filament_diameter = 1.8
 fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear
-first_layer_bed_temperature = 85
+first_layer_bed_temperature = 80
 first_layer_extrusion_width = 0
 first_layer_height = 100%
 first_layer_speed = 30%
-first_layer_temperature = 230
+first_layer_temperature = 190
 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0
@@ -54,14 +54,14 @@ print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
-retract_lift = 0
+retract_lift = 0.1
 retract_restart_extra = 0.1
 retract_speed = 30
 rotate = 0
 scale = 1
-skirt_distance = 6
+skirt_distance = 12
 skirt_height = 1
-skirts = 1
+skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
@@ -74,9 +74,9 @@ support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
 support_material_tool = 0
-temperature = 230
-threads = 2
+temperature = 190
+threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130
 use_relative_e_distances = 0
-z_offset = -0.5
+z_offset = 0.0