X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=scaffold-clamp-common.scad;h=cc5bad153206ffca5fdb94c8685e9bcd2de9dff8;hb=6a319b7ceeca0d02fbeac92c0737e976919d87a1;hp=d2640b6a9a08ef3e8b75c0467896634de7a9da05;hpb=8021ea1a561f769b7d4f66c47812397a726c722f;p=reprap-play.git diff --git a/scaffold-clamp-common.scad b/scaffold-clamp-common.scad index d2640b6..cc5bad1 100644 --- a/scaffold-clamp-common.scad +++ b/scaffold-clamp-common.scad @@ -28,6 +28,15 @@ bolt_gap = 1.0; // total, on both sides vhook_th = 14; +// ---------- cleat ---------- + +cleat_frames = 10; +cleat_curve_r = 200; +cleat_horn_l = 60; +cleat_horn_d_min = [8, 10]; +cleat_horn_d_max = [10, 12]; +cleat_height = 25; + // ---------- hhook ---------- hhook_inside = 40; @@ -43,6 +52,8 @@ pin_tail = pin_hole_dia + pin_head_th + hinge_z_gap*3; // ========== calculated ========== +TAU = PI*2; + hole_dia = th + pin_gap; bolt_hole_r = (bolt_dia + bolt_gap)/2; @@ -236,6 +247,47 @@ module VHookPlanDemo(){ } } +// ---------- cleat ---------- + +function cleat_frame_theta(s) = s * cleat_horn_l / cleat_curve_r * 360/TAU; +function cleat_frame_z(s) = cleat_curve_r * (1 - cos(cleat_frame_theta(s))); +function cleat_frame_x(s) = cleat_curve_r * sin(cleat_frame_theta(s)); +function cleat_frame_r(s) = ( cleat_horn_d_min * s + + cleat_horn_d_max * (1-s) ) * 0.5; + +module CleatFrame(s) { + r = cleat_frame_r(s); + translate([cleat_frame_x(s), 0, cleat_frame_z(s)]) + rotate([0, 90, 0]) + scale([1, r[1]/r[0]]) + sphere(r= r[0]); +} + + +module CleatHorn(){ + for (si=[0 : cleat_frames-2]) { + s0 = si / (cleat_frames-1); + s1 = (si+1) / (cleat_frames-1); + //hull(){ + CleatFrame(s0); + CleatFrame(s1); + //} + } +} + +module VCleatA(){ ////toplevel + %DummyA(); + + translate([0, -(main_r + cleat_height), 0]) { + rotate([0, -90, 90]) { + for (m=[0,1]) { + mirror([m,0,0]) + CleatHorn(); + } + } + } +} + // ---------- hhook ---------- module HHookHookPlan(){