X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.unit.xml;h=bf0deb1f97cd64d983a67daf1f9e0f25b58e4281;hb=68c913fd751f5c750e3c786b4ed512154b354599;hp=e9031567d2880b32a64c29f43d64fbf7d4dcaafb;hpb=2bcc2523711e69e6daa744641e56ed8b78646676;p=elogind.git
diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml
index e9031567d..bf0deb1f9 100644
--- a/man/systemd.unit.xml
+++ b/man/systemd.unit.xml
@@ -73,7 +73,10 @@
$XDG_CONFIG_HOME/systemd/user/*$HOME/.config/systemd/user/*/etc/systemd/user/*
+$XDG_RUNTIME_DIR/systemd/user/*/run/systemd/user/*
+$XDG_DATA_HOME/systemd/user/*
+$HOME/.local/share/systemd/user/*/usr/lib/systemd/user/*...
@@ -178,10 +181,10 @@
foo.service.wants/ may exist. All
unit files symlinked from such a directory are
implicitly added as dependencies of type
- Wanted= to the unit. This is useful
+ Wants= to the unit. This is useful
to hook units into the start-up of other units,
without having to modify their unit files. For details
- about the semantics of Wanted=, see
+ about the semantics of Wants=, see
below. The preferred way to create symlinks in the
.wants/ directory of a unit file
is with the enable command of the
@@ -201,7 +204,16 @@
settings to a unit, without having to modify their
unit files. Make sure that the file that is included
has the appropriate section headers before any
- directive.
+ directive. Note that for instanced units this logic
+ will first look for the instance
+ .d/ subdirectory and read its
+ .conf files, followed by the
+ template .d/ subdirectory and reads
+ its .conf files.
+
+
Note that while systemd offers a flexible
dependency system between units it is recommended to
@@ -217,12 +229,17 @@
the file system namespace. If this applies, a special
way to escape the path name is used, so that the
result is usable as part of a filename. Basically,
- given a path, "/" is replaced by "-", and all
- unprintable characters and the "-" are replaced by
- C-style "\x20" escapes. The root directory "/" is
- encoded as single dash, while otherwise the initial
- and ending "/" is removed from all paths during
- transformation. This escaping is reversible.
+ given a path, "/" is replaced by "-" and all other
+ characters which are not ASCII alphanumerics are
+ replaced by C-style "\x2d" escapes (except that "_"
+ is never replaced and "." is only replaced when it
+ would be the first character in the escaped path).
+ The root directory "/" is encoded as single dash,
+ while otherwise the initial and ending "/" are removed
+ from all paths during transformation. This escaping
+ is reversible. Properly escaped paths can be generated
+ using the systemd-escape1
+ command.
Optionally, units may be instantiated from a
template file at runtime. This allows creation of
@@ -273,8 +290,10 @@
() and the variable
$SYSTEMD_UNIT_PATH is set, this
contents of this variable overrides the unit load
- path.
-
+ path. If $SYSTEMD_UNIT_PATH ends
+ with an empty component (:), the
+ usual unit load path will be appended to the contents
+ of the variable.
@@ -334,13 +353,25 @@
/etc/systemd/userLocal configuration
+
+ $XDG_RUNTIME_DIR/systemd/user
+ Runtime units (only used when $XDG_RUNTIME_DIR is set)
+ /run/systemd/userRuntime units
+
+ $XDG_DATA_HOME/systemd/user
+ Units of packages that have been installed in the home directory (only used when $XDG_DATA_HOME is set)
+
+
+ $HOME/.local/share/systemd/user
+ Units of packages that have been installed in the home directory (only used when $XDG_DATA_HOME is not set)
+ /usr/lib/systemd/user
- Units of installed packages
+ Units of packages that have been installed system-wide
@@ -396,7 +427,7 @@
man:. For more
information about the syntax of these
URIs, see
- uri7. The
+ uri7. The
URIs should be listed in order of
relevance, starting with the most
relevant. It is a good idea to first
@@ -866,20 +897,22 @@
JobTimeoutSec=
-
- When clients are
- waiting for a job of this unit to
- complete, time out after the specified
- time. If this time limit is reached,
- the job will be cancelled, the unit
- however will not change state or even
- enter the failed
- mode. This value defaults to 0 (job
- timeouts disabled), except for device
+ JobTimeoutAction=
+ JobTimeoutRebootArgument=
+
+ When a job for this
+ unit is queued a time-out may be
+ configured. If this time limit is
+ reached, the job will be cancelled,
+ the unit however will not change state
+ or even enter the
+ failed mode. This
+ value defaults to 0 (job timeouts
+ disabled), except for device
units. NB: this timeout is independent
from any unit-specific timeout (for
example, the timeout set with
- Timeout= in service
+ StartTimeoutSec= in service
units) as the job timeout has no
effect on the unit itself, only on the
job that might be pending for it. Or
@@ -889,7 +922,22 @@
timeout set with this option however
is useful to abort only the job
waiting for the unit state to
- change.
+ change.
+
+ JobTimeoutAction=
+ optionally configures an additional
+ action to take when the time-out is
+ hit. It takes the same values as the
+ per-service
+ StartLimitAction=
+ setting, see
+ systemd.service5
+ for details. Defaults to
+ . JobTimeoutRebootArgument=
+ configures an optional reboot string
+ to pass to the
+ reboot2
+ system call.
@@ -900,6 +948,8 @@
ConditionSecurity=ConditionCapability=ConditionACPower=
+ ConditionNeedsUpdate=
+ ConditionFirstBoot=ConditionPathExists=ConditionPathExistsGlob=ConditionPathIsDirectory=
@@ -909,7 +959,11 @@
ConditionDirectoryNotEmpty=ConditionFileNotEmpty=ConditionFileIsExecutable=
- ConditionNull=
+
+
Before starting a unit
verify that the specified condition is
@@ -930,7 +984,9 @@
x86,
x86-64,
ppc,
+ ppc-le,
ppc64,
+ ppc64-le,
ia64,
parisc,
parisc64,
@@ -939,7 +995,9 @@
sparc,
sparc64,
mips,
+ mips-le,
mips64,
+ mips64-le,
alpha,
arm,
arm-be,
@@ -947,7 +1005,9 @@
arm64-be,
sh,
sh64,
- m86k to test
+ m86k,
+ tilegx,
+ cris to test
against a specific architecture. The
architecture is determined from the
information returned by
@@ -978,23 +1038,27 @@
virtualization solution, or one of
qemu,
kvm,
+ zvm,
vmware,
microsoft,
oracle,
xen,
bochs,
- chroot,
uml,
openvz,
lxc,
lxc-libvirt,
- systemd-nspawn to
- test against a specific
- implementation. If multiple
- virtualization technologies are nested,
- only the innermost is considered. The
- test may be negated by prepending an
- exclamation mark.
+ systemd-nspawn,
+ docker to test
+ against a specific implementation. See
+ systemd-detect-virt1
+ for a full list of known
+ virtualization technologies and their
+ identifiers. If multiple
+ virtualization technologies are
+ nested, only the innermost is
+ considered. The test may be negated by
+ prepending an exclamation mark.
ConditionHost=
may be used to match against the
@@ -1029,14 +1093,15 @@
ConditionSecurity=
may be used to check whether the given
security module is enabled on the
- system. Currently the recognized values
- values are selinux,
+ system. Currently the recognized
+ values values are
+ selinux,
apparmor,
- ima and
- smack.
- The test may be negated by prepending
- an exclamation
- mark.
+ ima,
+ smack and
+ audit. The test may
+ be negated by prepending an
+ exclamation mark.ConditionCapability=
may be used to check whether the given
@@ -1045,7 +1110,7 @@
(i.e. this does not check whether
capability is actually available in
the permitted or effective sets, see
- capabilities7
+ capabilities7
for details). Pass a capability name
such as CAP_MKNOD,
possibly prefixed with an exclamation
@@ -1068,6 +1133,45 @@
all AC connectors are disconnected
from a power source.
+ ConditionNeedsUpdate=
+ takes one of /var
+ or /etc as
+ argument, possibly prefixed with a
+ ! (for inverting
+ the condition). This condition may be
+ used to conditionalize units on
+ whether the specified directory
+ requires an update because
+ /usr's
+ modification time is newer than the
+ stamp file
+ .updated in the
+ specified directory. This is useful to
+ implement offline updates of the
+ vendor operating system resources in
+ /usr that require
+ updating of /etc
+ or /var on the
+ next following boot. Units making use
+ of this condition should order
+ themselves before
+ systemd-update-done.service8,
+ to make sure they run before the stamp
+ files's modification time gets reset
+ indicating a completed update.
+
+ ConditionFirstBoot=
+ takes a boolean argument. This
+ condition may be used to
+ conditionalize units on whether the
+ system is booting up with an
+ unpopulated /etc
+ directory. This may be used to
+ populate /etc on
+ the first boot after factory reset, or
+ when a new system instances boots up
+ for the first time.
+
With
ConditionPathExists=
a file existence condition is
@@ -1139,15 +1243,6 @@
exists, is a regular file and marked
executable.
- Finally,
- ConditionNull= may
- be used to add a constant condition
- check value to the unit. It takes a
- boolean argument. If set to
- false, the condition
- will always fail, otherwise
- succeed.
-
If multiple conditions are
specified, the unit will be executed if
all of them apply (i.e. a logical AND
@@ -1173,6 +1268,38 @@
have no effect.
+
+ AssertArchitecture=
+ AssertVirtualization=
+ AssertHost=
+ AssertKernelCommandLine=
+ AssertSecurity=
+ AssertCapability=
+ AssertACPower=
+ AssertNeedsUpdate=
+ AssertFirstBoot=
+ AssertPathExists=
+ AssertPathExistsGlob=
+ AssertPathIsDirectory=
+ AssertPathIsSymbolicLink=
+ AssertPathIsMountPoint=
+ AssertPathIsReadWrite=
+ AssertDirectoryNotEmpty=
+ AssertFileNotEmpty=
+ AssertFileIsExecutable=
+
+ Similar to the
+ ConditionArchitecture=,
+ ConditionVirtualization=,
+ ... condition settings described above
+ these settings add assertion checks to
+ the start-up of the unit. However,
+ unlike the conditions settings any
+ assertion setting that is not met
+ results in failure of the start
+ job it was triggered by.
+
+
SourcePath=A path to a
@@ -1181,7 +1308,7 @@
useful for implementation of generator
tools that convert configuration from
an external configuration file format
- into native unit files. Thus
+ into native unit files. This
functionality should not be used in
normal units.
@@ -1192,9 +1319,10 @@
[Install] Section Options
- Unit file may include a [Install] section, which
- carries installation information for the unit. This
- section is not interpreted by
+ Unit file may include an
+ [Install] section, which carries
+ installation information for the unit. This section is
+ not interpreted by
systemd1
during runtime. It is used exclusively by the
enable and
@@ -1206,7 +1334,7 @@
Alias=
- A space-seperated list
+ A space-separated list
of additional names this unit shall be
installed under. The names listed here
must have the same suffix (i.e. type)
@@ -1286,6 +1414,19 @@
of unit names may be
given.
+
+
+ DefaultInstance=
+
+ In template unit files,
+ this specifies for which instance the
+ unit shall be enabled if the template
+ is enabled without any explicitly set
+ instance. This option has no effect in
+ non-template unit files. The specified
+ string must be usable as instance
+ identifier.
+ The following specifiers are interpreted in the
@@ -1420,13 +1561,23 @@
+
+ Please note that specifiers
+ %U, %h,
+ %s are mostly useless when systemd
+ is running in system mode. PID 1 cannot query the
+ user account database for information, so the
+ specifiers only work as shortcuts for things which are
+ already specified in a different way in the unit
+ file. They are fully functional when systemd is
+ running in mode.See Alsosystemd1,
- systemctl8,
+ systemctl1,
systemd.special7,
systemd.service5,
systemd.socket5,
@@ -1441,7 +1592,8 @@
systemd.scope5,
systemd.slice5,
systemd.time7,
- capabilities7,
+ systemd-analyze1,
+ capabilities7,
systemd.directives7,
uname1