X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.unit.xml;h=3cc126b12aefa94e455b2e33431fcf3cd13a7c9a;hb=1c0f62e37b0e775df7cb6121bc6ae64d1d885d3b;hp=39862cf7c89162e510f1bb35eb820c1aa47f5851;hpb=d257ddef22ff1a1b98e6172799819e6511b1bcfb;p=elogind.git
diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml
index 39862cf7c..3cc126b12 100644
--- a/man/systemd.unit.xml
+++ b/man/systemd.unit.xml
@@ -121,8 +121,9 @@
If a line starts with
followed by a file name, the specified file will be
- read as if its contents were listed in place of the
- directive.
+ parsed at this point. Make sure that the file that is
+ included has the appropiate section headers before
+ any directives.
Along with a unit file
foo.service a directory
@@ -139,7 +140,10 @@
with the enable command of the
systemctl1
tool which reads information from the [Install]
- section of unit files. (See below.)
+ section of unit files. (See below.) A similar
+ functionality exists for Requires=
+ type dependencies as well, the directory suffix is
+ .requires/ in this case.
Note that while systemd offers a flexible
dependency system between units it is recommended to
@@ -177,22 +181,86 @@
and no file by that name is found, systemd will look
for getty@.service and
instantiate a service from that configuration file if
- it is found. To refer to the instance string from
+ it is found.
+
+ To refer to the instance string from
within the configuration file you may use the special
%i specifier in many of the
- configuration options. Other specifiers that may be
- used are %n, %N,
- %p, %P,
- %I and %f, for
- the full unit name, the unescaped unit name, the
- prefix name, the unescaped prefix name, the unescaped
- instance name and the unescaped filename,
- respectively. The unescaped filename is either the
- unescaped instance name (if set) with / prepended (if
- necessary), or the prefix name similarly prepended
- with /. The prefix name here refers to the string
- before the @, i.e. "getty" in the example above, where
- "tty3" is the instance name.
+ configuration options. Other specifiers exist, the
+ full list is:
+
+
+ Specifiers available in unit files
+
+
+
+
+
+
+ Specifier
+ Meaning
+ Details
+
+
+
+
+ %n
+ Full unit name
+
+
+
+ %N
+ Unescaped full unit name
+
+
+
+ %p
+ Prefix name
+ This refers to the string before the @, i.e. "getty" in the example above, where "tty3" is the instance name.
+
+
+ %P
+ Unescaped prefix name
+
+
+
+ %i
+ Instance name
+ This is the string between the @ character and the suffix.
+
+
+ %I
+ Unescaped instance name
+
+
+
+ %f
+ Unescaped file name
+ This is either the unescaped instance name (if set) with / prepended (if necessary), or the prefix name similarly prepended with /.
+
+
+ %c
+ Control group path of the unit
+
+
+
+ %r
+ Root control group path of systemd
+
+
+
+ %R
+ Parent directory of the root control group path of systemd
+
+
+
+ %t
+ Runtime socket dir
+ This is either /run (for the system manager) or $XDG_RUNTIME_DIR (for user managers).
+
+
+
+
If a unit file is empty (i.e. has the file size
0) or is symlinked to /dev/null
@@ -216,21 +284,6 @@
dependent on the type of unit:
-
- Names=
-
- Additional names for
- this unit. The names listed here must
- have the same suffix (i.e. type) as
- the unit file name. This option may be
- specified more than once, in which
- case all listed names are used. Note
- that this option is different from the
- Alias= option from
- the [Install] section mentioned
- below. See below for details.
-
- Description=
@@ -352,7 +405,7 @@
unexpectedly disappear if a service
terminates on its own choice, a device
is unplugged or a mount point
- unmounted with involvement of
+ unmounted without involvement of
systemd.
@@ -456,6 +509,60 @@
state.
+
+ PropagateReloadTo=
+ PropagateReloadFrom=
+
+ Lists one or more
+ units where reload requests on the
+ unit will be propagated to/on the
+ other unit will be propagated
+ from. Issuing a reload request on a
+ unit will automatically also enqueue a
+ reload request on all units that the
+ reload request shall be propagated to
+ via these two
+ settings.
+
+
+
+ OnFailureIsolate=
+
+ Takes a boolean
+ argument. If the
+ unit listed in
+ OnFailure= will be
+ enqueued in isolation mode, i.e. all
+ units that are not its dependency will
+ be stopped. If this is set only a
+ single unit may be listed in
+ OnFailure=. Defaults
+ to
+ .
+
+
+
+ IgnoreOnIsolate=
+
+ Takes a boolean
+ argument. If
+ this unit will not be stopped when
+ isolating another unit. Defaults to
+ .
+
+
+
+ IgnoreOnSnapshot=
+
+ Takes a boolean
+ argument. If
+ this unit will not be included in
+ snapshots. Defaults to
+ for device and
+ snapshot units,
+ for the others.
+
+
StopWhenUnneeded=
@@ -573,17 +680,26 @@
ConditionPathExists=
+ ConditionPathExistsGlob=
+ ConditionPathIsDirectory=
+ ConditionPathIsSymbolicLink=
+ ConditionPathIsMountPoint=
+ ConditionDirectoryNotEmpty=
+ ConditionFileIsExecutable=ConditionKernelCommandLine=
+ ConditionVirtualization=
+ ConditionSecurity=
+ ConditionCapability=ConditionNull=Before starting a unit
verify that the specified condition is
true. With
ConditionPathExists=
- a file existance condition can be
+ a file existence condition can be
checked before a unit is started. If
the specified absolute path name does
- not exist startup of a unit will not
+ not exist, startup of a unit will not
actually happen, however the unit is
still useful for ordering purposes in
this case. The condition is checked at
@@ -593,15 +709,47 @@
ConditionPathExists=
is prefixed with an exclamation mark
(!), the test is negated, and the unit
- only started if the path does not
- exist. Similarly
+ is only started if the path does not
+ exist.
+ ConditionPathExistsGlob=
+ works in a similar way, but checks for
+ the existence of at least one file or
+ directory matching the specified
+ globbing
+ pattern. ConditionPathIsDirectory=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists and is a
+ directory. ConditionPathIsSymbolicLink=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists and is a symbolic
+ link. ConditionPathIsMountPoint=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists and is a mount
+ point. ConditionFileIsExecutable=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists, is a regular file and marked
+ executable.
+ ConditionDirectoryNotEmpty=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists and is a non-empty
+ directory. Similarly
ConditionKernelCommandLine=
may be used to check whether a
specific kernel command line option is
set (or if prefixed with the
exclamation mark unset). The argument
must either be a single word, or an
- assignment (i.e. two words, seperated
+ assignment (i.e. two words, separated
by the equality sign). In the former
case the kernel command line is
searched for the word appearing as is,
@@ -609,7 +757,54 @@
assignment. In the latter case the
exact assignment is looked for with
right and left hand side
- matching. Finally,
+ matching. ConditionVirtualization=
+ may be used to check whether the
+ system is executed in a virtualized
+ environment and optionally test
+ whether it is a specific
+ implementation. Takes either boolean
+ value to check if being executed in
+ any virtualized environment, or one of
+ vm and
+ container to test
+ against a specific type of
+ virtualization solution, or one of
+ qemu,
+ kvm,
+ vmware,
+ microsoft,
+ oracle,
+ xen,
+ bochs,
+ chroot,
+ openvz,
+ lxc,
+ lxc-libvirt,
+ systemd-nspawn to test
+ against a specific implementation. If
+ multiple virtualization technologies
+ are nested only the innermost is
+ considered. The test may be negated by
+ prepending an exclamation mark.
+ ConditionSecurity=
+ may be used to check whether the given
+ security module is enabled on the
+ system. Currently the only recognized
+ value is selinux.
+ The test may be negated by prepending
+ an exclamation
+ mark. ConditionCapability=
+ may be used to check whether the given
+ capability exists in the capability
+ bounding set of the service manager
+ (i.e. this does not check whether
+ capability is actually available in
+ the permitted or effective sets, see
+ capabilities7
+ for details). Pass a capability name
+ such as CAP_MKNOD,
+ possibly prefixed with an exclamation
+ mark to negate the check. Finally,
ConditionNull= may
be used to add a constant condition
check value to the unit. It takes a
@@ -617,10 +812,53 @@
false the condition
will always fail, otherwise
succeed. If multiple conditions are
- specified the unit will be executed
- iff at least one of them applies
- (i.e. a logical OR is
- applied).
+ specified the unit will be executed if
+ all of them apply (i.e. a logical AND
+ is applied). Condition checks can be
+ prefixed with a pipe symbol (|) in
+ which case a condition becomes a
+ triggering condition. If at least one
+ triggering condition is defined for a
+ unit then the unit will be executed if
+ at least one of the triggering
+ conditions apply and all of the
+ non-triggering conditions. If you
+ prefix an argument with the pipe
+ symbol and an exclamation mark the
+ pipe symbol must be passed first, the
+ exclamation second. Except for
+ ConditionPathIsSymbolicLink=,
+ all path checks follow
+ symlinks.
+
+
+
+ Names=
+
+ Additional names for
+ this unit. The names listed here must
+ have the same suffix (i.e. type) as
+ the unit file name. This option may be
+ specified more than once, in which
+ case all listed names are used. Note
+ that this option is different from the
+ Alias= option from
+ the [Install] section mentioned
+ below. See below for details. Note
+ that in almost all cases this option
+ is not what you want. A symlink alias
+ in the file system is generally
+ preferable since it can be used as
+ lookup key. If a unit with a symlinked
+ alias name is not loaded and needs to
+ be it is easily found via the
+ symlink. However, if a unit with an
+ alias name configured with this
+ setting is not loaded it will not be
+ discovered. This settings' only use is
+ in conjunction with service
+ instances.
+
@@ -723,7 +961,8 @@
systemd.target5,
systemd.path5,
systemd.timer5,
- systemd.snapshot5
+ systemd.snapshot5,
+ capabilities7