X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.netdev.xml;h=275ee528a039af2db6baaae3c887d938d1b279a4;hb=af951ff5e9964c877c64896dcd76f67eb42d2393;hp=64987980a73b7d4c6461e4c4822dde2238adbadc;hpb=72d33d99c5dda1aedf2e18b08236b86ecf5f520b;p=elogind.git
diff --git a/man/systemd.netdev.xml b/man/systemd.netdev.xml
index 64987980a..275ee528a 100644
--- a/man/systemd.netdev.xml
+++ b/man/systemd.netdev.xml
@@ -60,7 +60,10 @@
Virtual Network Device files must have the extension
.netdev; other extensions are ignored. Virtual
- network devices are created as soon as networkd is started.
+ network devices are created as soon as networkd is started. If a netdev
+ with the specified name already exists, networkd will use that as-is
+ rather than create its own. Note that the settings of the pre-existing
+ netdev will not be changed by networkd.
The .netdev files are read from the files located in the
system network directory /usr/lib/systemd/network,
@@ -163,7 +166,8 @@
macvlan, vxlan,
ipip, gre,
sit, vti,
- veth, and dummy
+ veth, tun,
+ tap and dummy
are supported. This option is compulsory.
@@ -173,7 +177,9 @@
The maximum transmission unit in bytes to
set for the device. The usual suffixes K, M, G,
are supported and are understood to the base of
- 1024.
+ 1024. This key is not currently suported for
+ tun or tap devices.
+
@@ -183,6 +189,7 @@
If none is given, one is generated based on
the interface name and the
machine-id5.
+ This key is not currently suported for tun or tap devices.
@@ -366,7 +373,7 @@
Takes a boolean argument. Configures whether packets
should be prepened with four extra bytes (two flag bytes and two
protocol bytes). If disabled it indicates that the packets will be
- pure IP packets. Defaults to yes.
+ pure IP packets. Defaults to no.
@@ -394,6 +401,87 @@
[Tun] section.
+
+ [Bond] Section Options
+
+ The [Bond] section accepts the following
+ key:
+
+
+
+ Mode=
+
+ Specifies one of the bonding policies. The default is
+ balance-rr (round robin). Possible values are
+ balance-rr,
+ active-backup,
+ balance-xor,
+ broadcast,
+ 802.3ad,
+ balance-tlb, and
+ balance-alb.
+
+
+
+
+
+ TransmitHashPolicy=
+
+ Selects the transmit hash policy to use for slave selection in
+ balance-xor, 802.3ad, and tlb modes. Possible values are
+ layer2,
+ layer3+4,
+ layer2+3,
+ encap2+3,
+ 802.3ad, and
+ encap3+4.
+
+
+
+
+
+ LACPTransmitRate=
+
+ Specifies the rate with which link partner
+ transmits Link Aggregation Control Protocol Data Unit packets
+ in 802.3ad mode. Possible values are
+ slow, which requests partner to transmit LACPDUs every 30 seconds, and
+ fast, which requests partner to transmit LACPDUs every second.
+ The default value is slow.
+
+
+
+
+ MIIMonitorSec=
+
+ Specifies the frequency that Media Independent Interface link
+ monitoring will occur. A value of zero disables MII link monitoring.
+ This values is rounded down to the nearest millisecond. The default
+ value is 0.
+
+
+
+
+ UpDelaySec=
+
+ Specifies the delay before a link is enabled after a link up
+ status has been detected. This value is rounded down to a multiple of
+ MIIMonitorSec. The default value is 0.
+
+
+
+
+ DownDelaySec=
+
+ Specifies the delay before a link is disabled after a link down
+ status has been detected. This value is rounded down to a multiple of
+ MIIMonitorSec. The default value is 0.
+
+
+
+
+
+
Example