X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=filamentspool.scad;h=487d853b0645b524d5d6ca1f7dc8a0f8aa016b39;hb=fcd425d28e0fd254673250e4c5d13db7b98aab48;hp=ab7ab60eedaa9c3d1458850852191a1a9e7804b0;hpb=4c856b3688e86c7e08bc471b4fe3be4e857e5220;p=reprap-play.git

diff --git a/filamentspool.scad b/filamentspool.scad
index ab7ab60..487d853 100644
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -5,7 +5,7 @@ fdia=1.75;
 slop=0.5;
 bigslop=slop*2;
 
-hubeffrad = 30 + 55;
+hubeffrad = 30; // + 55;
 hubbigrad = 20;
 hublwidth = 3;
 hubstemwidth = 2;
@@ -62,7 +62,7 @@ totalwidth = armendwallthick*2 + channelwidth;
 totalheight = channeldepth + armendbasethick;
 stalkwidth = prongwidth + prongstalkxwidth;
 
-module ArmEnd(length=120){
+module ArmEnd(length=120){ ////toplevel
   translate([ratchettoothsmoothr, channelwidth/2, -armendbasethick]) {
     rotate([0,0,-90])
       DoveClipPairBase(h=doveclipheight);
@@ -122,7 +122,7 @@ module FilamentCupCup(){
   }
 }
 
-module FilamentCup() {
+module FilamentCup() { ////toplevel
   FilamentCupHandle();
 
   dx = cupbigrad + prongwidth;
@@ -168,7 +168,7 @@ module CupSecuringClipSolidSmooth(xrad=0, xdepth=0){
   }
 }
 
-module CupSecuringClip(){
+module CupSecuringClip(){ ////toplevel
   wingswidth = wingspoke*2 + overclipthick*2 + overcliproundr*2 + totalwidth;
   difference(){
     union(){
@@ -181,19 +181,20 @@ module CupSecuringClip(){
   }
 }
 
-module ArmDoveClipPin(){
+module ArmDoveClipPin(){ ////toplevel
   DoveClipPin(h=doveclipheight);
 }
 
-module Hub(){
+module Hub(){ ////toplevel
   difference(){
-    cylinder(h=hublthick, r=hubbigrad);
-    translate([0,0,-1]) cylinder(h=hublthick+2, r=(hubbigrad-hublwidth));
+    cylinder($fn=60, h=hublthick, r=hubbigrad);
+    translate([0,0,-1])
+      cylinder($fn=30, h=hublthick+2, r=(hubbigrad-hublwidth));
   }
-  axlerad = hubaxlerad + bigslop;
+  axlerad = hubaxlerad + slop;
   difference(){
     cylinder(h=hubaxlelen, r=axlerad+hublwidth);
-    translate([0,0,-1]) cylinder(h=hubaxlelen+2, r=axlerad);
+    translate([0,0,-1]) cylinder($fn=60, h=hubaxlelen+2, r=axlerad);
   }
   hole = hubeffrad - hubbigrad - DoveClip_depth() - hublwidth*2;
   holewidth = DoveClip_width() - hubstemwidth*2;
@@ -216,10 +217,12 @@ module Hub(){
     rotate([0,0,ang]) rotate([90,0,0]) {
       translate([0,0,-hublwidth/2])
 	linear_extrude(height=hublwidth)
-	polygon([[xmin,0], [xmax,0], [xmax,hublthick], [xmin,hubaxlelen]]);
+	polygon([[xmin,0.05], [xmax,0.05],
+		 [xmax,hublthick-0.2], [xmin, hubaxlelen-0.2]]);
     }
 }
 
 //ArmEnd();
 //FilamentCup();
 //CupSecuringClip();
+//Hub();