X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=extras%2Fscsi_id%2Fscsi_id.config;h=d2a10a5f7b3a6009b3e807ab449766632348f1ef;hb=f183b6ed766a18835d53dc1e36a4e98756ebd0b7;hp=4fdb89e28a31eca254ee0b8163be0e181e905820;hpb=c521693b54956c1f2dd0c0947c819b8570f6edaa;p=elogind.git diff --git a/extras/scsi_id/scsi_id.config b/extras/scsi_id/scsi_id.config index 4fdb89e28..d2a10a5f7 100644 --- a/extras/scsi_id/scsi_id.config +++ b/extras/scsi_id/scsi_id.config @@ -1,40 +1,17 @@ # -# Informational and example scsi_id.config file for use with scsi_id. +# scsi_id configuration # - -# General syntax is: -# -# lower or upper case has no affect on the left side. Quotes (") are -# required if you need spaces in values. Model is the same as the SCSI +# lower or upper case has no effect on the left side. Quotes (") are +# required for spaces in values. Model is the same as the SCSI # INQUIRY product identification field. Per the SCSI INQUIRY, the vendor # is limited to 8 bytes, model to 16 bytes. # -# The first maching line found is used. Short matches match longer ones, +# The first matching line found is used. Short matches match longer ones, # if you do not want such a match space fill the extra bytes. If no model # is specified, only the vendor string need match. # -# The "option" line is searched when scsi_id first starts up (for use with -# hotplug during boot). -# # options= -# # vendor=string[,model=string],options= -# -# If you normally don't need id's, black list everyone: -# -options=-b - -# -# Then white list devices on your system that have correct and useful id's: -# -vendor=someone, model=nicedrive, options=-g - -# If you have all good devices on your system use, mark all as good: - -## options=-g - -# Then black list any offenders. Missing entries here could be dangerous -# if you rely on the id for naming or multi-path configuration! - -## vendor=ELBONIA, model=borken, options=-b +# some libata drives require vpd page 0x80 +vendor="ATA",options=-p 0x80