-<?xml version="1.0"?>
-<!--*-nxml-*-->
+<?xml version="1.0"?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!--
This file is part of systemd.
Copyright 2011 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
-<refentry id="sysctl.d">
-
- <refentryinfo>
- <title>sysctl.d</title>
- <productname>systemd</productname>
-
- <authorgroup>
- <author>
- <contrib>Developer</contrib>
- <firstname>Lennart</firstname>
- <surname>Poettering</surname>
- <email>lennart@poettering.net</email>
- </author>
- </authorgroup>
- </refentryinfo>
-
- <refmeta>
- <refentrytitle>sysctl.d</refentrytitle>
- <manvolnum>5</manvolnum>
- </refmeta>
-
- <refnamediv>
- <refname>sysctl.d</refname>
- <refpurpose>Configure kernel parameters at boot</refpurpose>
- </refnamediv>
-
- <refsynopsisdiv>
- <para><filename>/etc/sysctl.d/*.conf</filename></para>
- </refsynopsisdiv>
-
- <refsect1>
- <title>Description</title>
-
- <para><command>systemd</command> uses
- <filename>/etc/sysctl.d/</filename> to configure
- <citerefentry><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>
- kernel parameters to load during boot. Each
- configuration file is named in the style of
- <filename>/etc/sysctl.d/<program>.conf</filename>.</para>
- </refsect1>
-
- <refsect1>
- <title>Configuration Format</title>
-
- <para>The configuration files should simply contain a
- list of variable assignments, separated by
- newlines. Empty lines and lines whose first
- non-whitespace character is # or ; are ignored.</para>
-
- <para>Note that both / and . are accepted as
- separators in sysctl variable names.</para>
-
- </refsect1>
-
- <refsect1>
- <title>Example</title>
- <example>
- <title>/etc/sysctl.d/domain-name.conf example:</title>
-
- <programlisting># Set kernel YP domain name
-kernel.domainname=example.com</programlisting>
- </example>
- </refsect1>
-
- <refsect1>
- <title>See Also</title>
- <para>
- <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>sysctl.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
- </para>
- </refsect1>
+<refentry id="sysctl.d"
+ xmlns:xi="http://www.w3.org/2001/XInclude">
+
+ <refentryinfo>
+ <title>sysctl.d</title>
+ <productname>systemd</productname>
+
+ <authorgroup>
+ <author>
+ <contrib>Developer</contrib>
+ <firstname>Lennart</firstname>
+ <surname>Poettering</surname>
+ <email>lennart@poettering.net</email>
+ </author>
+ </authorgroup>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>sysctl.d</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </refmeta>
+
+ <refnamediv>
+ <refname>sysctl.d</refname>
+ <refpurpose>Configure kernel parameters at boot</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <para><filename>/etc/sysctl.d/*.conf</filename></para>
+ <para><filename>/run/sysctl.d/*.conf</filename></para>
+ <para><filename>/usr/lib/sysctl.d/*.conf</filename></para>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>At boot,
+ <citerefentry><refentrytitle>systemd-sysctl.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ reads configuration files from the above directories to configure
+ <citerefentry><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ kernel parameters.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Configuration Format</title>
+
+ <para>The configuration files contain a list of variable
+ assignments, separated by newlines. Empty lines and lines whose
+ first non-whitespace character is <literal>#</literal> or
+ <literal>;</literal> are ignored.</para>
+
+ <para>Note that either <literal>/</literal> or
+ <literal>.</literal> may be used as separators within sysctl
+ variable names. If the first separator is a slash, remaining
+ slashes and dots are left intact. If the first separator is a dot,
+ dots and slashes are interchanged.
+ <literal>kernel.domainname=foo</literal> and
+ <literal>kernel/domainname=foo</literal> are equivalent and will
+ cause <literal>foo</literal> to be written to
+ <filename>/proc/sys/kernel/domainname</filename>. Either
+ <literal>net.ipv4.conf.enp3s0/200.forwarding</literal> or
+ <literal>net/ipv4/conf/enp3s0.200/forwarding</literal> may be used
+ to refer to
+ <filename>/proc/sys/net/ipv4/conf/enp3s0.200/forwarding</filename>.
+ </para>
+
+ <para>The settings configured with <filename>sysctl.d</filename>
+ files will be applied early on boot. The network
+ interface-specific options will also be applied individually for
+ each network interface as it shows up in the system. (More
+ specifically, <filename>net.ipv4.conf.*</filename>,
+ <filename>net.ipv6.conf.*</filename>,
+ <filename>net.ipv4.neigh.*</filename> and
+ <filename>net.ipv6.neigh.*</filename>).</para>
+
+ <para>Many sysctl parameters only become available when certain
+ kernel modules are loaded. Modules are usually loaded on demand,
+ e.g. when certain hardware is plugged in or network brought up.
+ This means that
+ <citerefentry><refentrytitle>systemd-sysctl.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ which runs during early boot will not configure such parameters if
+ they become available after it has run. To set such parameters, it
+ is recommended to add an
+ <citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ rule to set those parameters when they become available.
+ Alternatively, a slightly simpler and less efficient option is to
+ add the module to
+ <citerefentry><refentrytitle>modules-load.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ causing it to be loaded statically before sysctl settings are
+ applied (see example below).</para>
+ </refsect1>
+
+ <xi:include href="standard-conf.xml" xpointer="confd" />
+
+ <refsect1>
+ <title>Examples</title>
+ <example>
+ <title>Set kernel YP domain name</title>
+ <para><filename>/etc/sysctl.d/domain-name.conf</filename>:
+ </para>
+
+ <programlisting>kernel.domainname=example.com</programlisting>
+ </example>
+
+ <example>
+ <title>Disable packet filter on bridged packets (method one)</title>
+ <para><filename>/etc/udev/rules.d/99-bridge.rules</filename>:
+ </para>
+
+ <programlisting>ACTION=="add", SUBSYSTEM=="module", KERNEL=="bridge", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/net/bridge"
+</programlisting>
+
+ <para><filename>/etc/sysctl.d/bridge.conf</filename>:
+ </para>
+
+ <programlisting>net.bridge.bridge-nf-call-ip6tables = 0
+net.bridge.bridge-nf-call-iptables = 0
+net.bridge.bridge-nf-call-arptables = 0
+</programlisting>
+ </example>
+
+ <example>
+ <title>Disable packet filter on bridged packets (method two)</title>
+ <para><filename>/etc/modules-load.d/bridge.conf</filename>:
+ </para>
+
+ <programlisting>bridge</programlisting>
+
+ <para><filename>/etc/sysctl.d/bridge.conf</filename>:
+ </para>
+
+ <programlisting>net.bridge.bridge-nf-call-ip6tables = 0
+net.bridge.bridge-nf-call-iptables = 0
+net.bridge.bridge-nf-call-arptables = 0
+</programlisting>
+ </example>
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-sysctl.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-delta</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>sysctl.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>modprobe</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ </para>
+ </refsect1>
</refentry>