-<?xml version='1.0'?> <!--*-nxml-*-->
+<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!--
- This file is part of elogind.
-
- Copyright 2010 Lennart Poettering
-
- elogind is free software; you can redistribute it and/or modify it
- under the terms of the GNU Lesser General Public License as published by
- the Free Software Foundation; either version 2.1 of the License, or
- (at your option) any later version.
-
- elogind is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public License
- along with elogind; If not, see <http://www.gnu.org/licenses/>.
+ SPDX-License-Identifier: LGPL-2.1+
-->
<refentry id="sd_notify"
<funcdef>int <function>sd_notifyf</function></funcdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>format</parameter></paramdef>
- <paramdef>...</paramdef>
+ <paramdef>…</paramdef>
</funcprototype>
<funcprototype>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>format</parameter></paramdef>
- <paramdef>...</paramdef>
+ <paramdef>…</paramdef>
</funcprototype>
<funcprototype>
<para><function>sd_notify()</function> may be called by a service
to notify the service manager about state changes. It can be used
to send arbitrary information, encoded in an
- environment-block-like string. Most importantly it can be used for
+ environment-block-like string. Most importantly, it can be used for
start-up completion notification.</para>
<para>If the <parameter>unset_environment</parameter> parameter is
<varlistentry>
<term>READY=1</term>
- <listitem><para>Tells the service manager that service startup
- is finished. This is only used by elogind if the service
- definition file has Type=notify set. Since there is little
- value in signaling non-readiness, the only value services
- should send is <literal>READY=1</literal> (i.e.
- <literal>READY=0</literal> is not defined).</para></listitem>
+ <listitem><para>Tells the service manager that service startup is finished, or the service finished loading its
+ configuration. This is only used by elogind if the service definition file has <varname>Type=notify</varname>
+ set. Since there is little value in signaling non-readiness, the only value services should send is
+ <literal>READY=1</literal> (i.e. <literal>READY=0</literal> is not defined).</para></listitem>
</varlistentry>
<varlistentry>
present it to the user. Note that a service that sends this
notification must also send a <literal>READY=1</literal>
notification when it completed reloading its
- configuration.</para></listitem>
+ configuration. Reloads are propagated in the same way as they
+ are when initiated by the user.</para></listitem>
</varlistentry>
<varlistentry>
</varlistentry>
<varlistentry>
- <term>STATUS=...</term>
+ <term>STATUS=…</term>
<listitem><para>Passes a single-line UTF-8 status string back
to the service manager that describes the service state. This
is free-form and can be used for various purposes: general
state feedback, fsck-like programs could pass completion
- percentages and failing programs could pass a human readable
+ percentages and failing programs could pass a human-readable
error message. Example: <literal>STATUS=Completed 66% of file
- system check...</literal></para></listitem>
+ system check…</literal></para></listitem>
</varlistentry>
<varlistentry>
- <term>ERRNO=...</term>
+ <term>ERRNO=…</term>
<listitem><para>If a service fails, the errno-style error
code, formatted as string. Example: <literal>ERRNO=2</literal>
</varlistentry>
<varlistentry>
- <term>BUSERROR=...</term>
+ <term>BUSERROR=…</term>
<listitem><para>If a service fails, the D-Bus error-style
error code. Example:
</varlistentry>
<varlistentry>
- <term>MAINPID=...</term>
+ <term>MAINPID=…</term>
<listitem><para>The main process ID (PID) of the service, in
case the service manager did not fork off the process itself.
watchdog timestamp. This is the keep-alive ping that services
need to issue in regular intervals if
<varname>WatchdogSec=</varname> is enabled for it. See
- <citerefentry><refentrytitle>logind.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for information how to enable this functionality and
<citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for the details of how the service can check whether the
watchdog is enabled. </para></listitem>
</varlistentry>
+ <varlistentry>
+ <term>WATCHDOG_USEC=…</term>
+
+ <listitem><para>Reset <varname>watchdog_usec</varname> value during runtime.
+ Notice that this is not available when using <function>sd_event_set_watchdog()</function>
+ or <function>sd_watchdog_enabled()</function>.
+ Example : <literal>WATCHDOG_USEC=20000000</literal></para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>EXTEND_TIMEOUT_USEC=…</term>
+
+ <listitem><para>Tells the service manager to extend the startup, runtime or shutdown service timeout
+ corresponding the current state. The value specified is a time in microseconds during which the service must
+ send a new message. A service timeout will occur if the message isn't received, but only if the runtime of the
+ current state is beyond the original maximium times of <varname>TimeoutStartSec=</varname>, <varname>RuntimeMaxSec=</varname>,
+ and <varname>TimeoutStopSec=</varname>.
+ See <citerefentry><refentrytitle>elogind.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ for effects on the service timeouts.</para></listitem>
+ </varlistentry>
<varlistentry>
<term>FDSTORE=1</term>
- <listitem><para>Stores additional file descriptors in the
- service manager. File descriptors sent this way will be
- maintained per-service by the service manager and be passed
- again using the usual file descriptor passing logic on the
- next invocation of the service (see
- <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>).
- This is useful for implementing service restart schemes where
- services serialize their state to <filename>/run</filename>,
- push their file descriptors to the system manager, and are
- then restarted, retrieving their state again via socket
- passing and <filename>/run</filename>. Note that the service
- manager will accept messages for a service only if
- <varname>FileDescriptorStoreMax=</varname> is set to non-zero
- for it (defaults to zero). See
- <citerefentry><refentrytitle>logind.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
- for details. Multiple arrays of file descriptors may be sent
- in separate messages, in which case the arrays are combined.
- Note that the service manager removes duplicate file
- descriptors before passing them to the service. Use
- <function>sd_pid_notify_with_fds()</function> to send messages
- with <literal>FDSTORE=1</literal>, see
- below.</para></listitem>
+ <listitem><para>Stores additional file descriptors in the service manager. File descriptors sent this way will
+ be maintained per-service by the service manager and will later be handed back using the usual file descriptor
+ passing logic at the next invocation of the service, see
+ <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>. This is
+ useful for implementing services that can restart after an explicit request or a crash without losing
+ state. Any open sockets and other file descriptors which should not be closed during the restart may be stored
+ this way. Application state can either be serialized to a file in <filename>/run</filename>, or better, stored
+ in a <citerefentry><refentrytitle>memfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry> memory
+ file descriptor. Note that the service manager will accept messages for a service only if its
+ <varname>FileDescriptorStoreMax=</varname> setting is non-zero (defaults to zero, see
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>). If file
+ descriptors sent are pollable (see
+ <citerefentry><refentrytitle>epoll_ctl</refentrytitle><manvolnum>2</manvolnum></citerefentry>), then any
+ <constant>EPOLLHUP</constant> or <constant>EPOLLERR</constant> event seen on them will result in their
+ automatic removal from the store. Multiple arrays of file descriptors may be sent in separate messages, in
+ which case the arrays are combined. Note that the service manager removes duplicate (pointing to the same
+ object) file descriptors before passing them to the service. Use <function>sd_pid_notify_with_fds()</function>
+ to send messages with <literal>FDSTORE=1</literal>, see below.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>FDSTOREREMOVE=1</term>
+
+ <listitem><para>Removes file descriptors from the file descriptor store. This field needs to be combined with
+ <varname>FDNAME=</varname> to specify the name of the file descriptors to remove.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>FDNAME=…</term>
+
+ <listitem><para>When used in combination with <varname>FDSTORE=1</varname>, specifies a name for the submitted
+ file descriptors. When used with <varname>FDSTOREREMOVE=1</varname>, specifies the name for the file
+ descriptors to remove. This name is passed to the service during activation, and may be queried using
+ <citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>. File
+ descriptors submitted without this field set, will implicitly get the name <literal>stored</literal>
+ assigned. Note that, if multiple file descriptors are submitted at once, the specified name will be assigned to
+ all of them. In order to assign different names to submitted file descriptors, submit them in separate
+ invocations of <function>sd_pid_notify_with_fds()</function>. The name may consist of arbitrary ASCII
+ characters except control characters or <literal>:</literal>. It may not be longer than 255 characters. If a
+ submitted name does not follow these restrictions, it is ignored.</para></listitem>
</varlistentry>
</variablelist>
<para>Note that elogind will accept status data sent from a
service only if the <varname>NotifyAccess=</varname> option is
correctly set in the service definition file. See
- <citerefentry><refentrytitle>logind.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details.</para>
+ <para>Note that <function>sd_notify()</function> notifications may be attributed to units correctly only if either
+ the sending process is still around at the time PID 1 processes the message, or if the sending process is
+ explicitly runtime-tracked by the service manager. The latter is the case if the service manager originally forked
+ off the process, i.e. on all processes that match <varname>NotifyAccess=</varname><option>main</option> or
+ <varname>NotifyAccess=</varname><option>exec</option>. Conversely, if an auxiliary process of the unit sends an
+ <function>sd_notify()</function> message and immediately exits, the service manager might not be able to properly
+ attribute the message to the unit, and thus will ignore it, even if
+ <varname>NotifyAccess=</varname><option>all</option> is set for it.</para>
+
<para><function>sd_notifyf()</function> is similar to
<function>sd_notify()</function> but takes a
<function>printf()</function>-like format string plus
use as originating PID for the message as first argument. This is
useful to send notification messages on behalf of other processes,
provided the appropriate privileges are available. If the PID
- argument is specified as 0 the process ID of the calling process
+ argument is specified as 0, the process ID of the calling process
is used, in which case the calls are fully equivalent to
<function>sd_notify()</function> and
<function>sd_notifyf()</function>.</para>
<refsect1>
<title>Return Value</title>
- <para>On failure, these calls return a negative errno-style error
- code. If <varname>$NOTIFY_SOCKET</varname> was not set and hence
- no status data could be sent, 0 is returned. If the status was
- sent, these functions return with a positive return value. In
- order to support both, init systems that implement this scheme and
- those which do not, it is generally recommended to ignore the
- return value of this call.</para>
+ <para>On failure, these calls return a negative errno-style error code. If <varname>$NOTIFY_SOCKET</varname> was
+ not set and hence no status message could be sent, 0 is returned. If the status was sent, these functions return a
+ positive value. In order to support both service managers that implement this scheme and those which do not, it is
+ generally recommended to ignore the return value of this call. Note that the return value simply indicates whether
+ the notification message was enqueued properly, it does not reflect whether the message could be processed
+ successfully. Specifically, no error is returned when a file descriptor is attempted to be stored using
+ <varname>FDSTORE=1</varname> but the service is not actually configured to permit storing of file descriptors (see
+ above).</para>
</refsect1>
<refsect1>
initialization:</para>
<programlisting>sd_notifyf(0, "READY=1\n"
- "STATUS=Processing requests...\n"
+ "STATUS=Processing requests…\n"
"MAINPID=%lu",
(unsigned long) getpid());</programlisting>
</example>
<para>To store an open file descriptor in the service manager,
in order to continue operation after a service restart without
- losing state use <literal>FDSTORE=1</literal>:</para>
+ losing state, use <literal>FDSTORE=1</literal>:</para>
- <programlisting>sd_pid_notify_with_fds(0, 0, "FDSTORE=1", &fd, 1);</programlisting>
+ <programlisting>sd_pid_notify_with_fds(0, 0, "FDSTORE=1\nFDNAME=foobar", &fd, 1);</programlisting>
</example>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
- <citerefentry><refentrytitle>elogind</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>logind.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
</para>
</refsect1>
~ianmdlvl / elogind.git / blobdiff