// this case will meet your needs.
include <utils.scad>
+include <funcs.scad>
phone = [ 75.0, 145.0 ];
//fingerpushhole_dias = [ 15, 18 ];
fingerpushhole_dias = [];
+lanyard_half_dia = 1.15;
+lanyard_entry_rel_breadth = 2;
+lanyard_channel_len = 15;
rearspeaker_pos_bl = [ 12.64, 18.72 ];
rearspeaker_size = [ 3.76, 7.36 ];
case_th_bottom = 2.5;
case_th_lid = 3.0;
-case_th_side = 2;
+case_th_side = 2.3;
case_th_lip = 1.2;
lid_screen_gap_extra = .66;
lid_gap_x = 0.25;
lid_gap_z = 0.25;
lid_lip = 1.75;
-
-catch_slop = 0.50;
+lid_edgepart_width = 5.0;
+lid_buttoncover_thick = 1.3;
+lid_buttoncover_reinf = 0.65;
foldover_gap = 0.50;
foldover_lever_gap = 0.50;
rearspeaker_gap = [ 2.0, 2.0 ]; // each side
-catch_len = 7.5;
-catch_width = 15;
-catch_thickness = 1.0;
-catch_side_gap = 0.75; // each side
-
-catch_depth = 0.75;
-catch_height = 0.35;
-catch_finger_height = 1.5;
-catch_finger_depth = 2.5;
+thumbrecess_depth = 1.3;
+thumbrecess_width = 16.5;
+thumbrecess_topcurve_r = 5.0;
prop_recess_under = 0.50;
prop_recess_slop = 0.200; // each side
prop_prop_gap = 0.5;
prop_prong_heel_slope = 0.5;
+lid_fold_clearance_antislop = 0.5;
+
// ---------- calculated ----------
phone_width = (phone + bumper*2)[0];
lpp10 = [ epp5[0] + lid_gap_x, kppc[1] + lid_gap_z ];
lpp11 = [ lpp10[0], epp5[1] + lid_gap_z ];
-lpp14 = lpp10 + [1,0] * keeper_inner_width;
+lpp14 = lpp10 + [1,0] * max(keeper_inner_width, lid_edgepart_width);
// exact x posn not very important; must extend past end of keeper
lpp15 = [ lpp14[0],
case_bottom_z = epp2o[1] - case_th_bottom;
-lid_close_clearance_skew = 1.3;
-
// button profile
bppM = epp4 + [0,5];
-bppN = [ 0.5 * (epp0[0] + epp4[0]), bppM[1] ];
+bppN = [ bppM[0] + lid_buttoncover_thick, bppM[1] ];
bppR = [ bppN[0] + lid_buttoncover_gap, -button_cutout_depth ];
bppS = [ epp1[0], bppR[1] ];
bppQ = [ bppM[0], bppR[1] - lid_buttoncover_overlap ];
bppV = lpp11;
bppW = lpp10;
+echo("BUTTON COVER TH", bppO[0] - bppP[0]);
+
// notification led aperture
nla_r0 = led_aperture/2;
chk(hex23, 13.74);
chk(hex24, 18.75);
-// catch
+lid_fold_clearance_skew =
+ (lpp10[1] - hppB[1]) /
+ (lpp10[0] - hppB[0]);
+
+echo("SK",lid_fold_clearance_skew);
-cppJ = [ epp4[0] + catch_thickness, lpp10[1] ];
-cppA = cppJ + [lid_gap_x, -lid_gap_z];
-cppB = [ epp0[0], cppA[1] ];
-cppP = [ epp4[0], cppJ[1] ];
+// thumb recess (used to be "catch" hence cpp*
-cppS = cppJ + [0,-1] * catch_len;
-cppD = [ cppA[0], cppS[1] + catch_slop ];
-cppC = [ cppB[0], cppD[1] ];
-cppT = cppS + [1,0] * catch_depth;
-cppU = cppT + [0,-1] * catch_height;
-cppV = [ cppS[0], cppU[1] - catch_depth ];
+cppA = epp4 + [thumbrecess_depth, 0];
+cppB = [ cppA[0], epp1[1] ];
-cppR = 0.5*(cppP + cppJ);
+// lanyard
-cp_rQ = 0.5 * (cppJ[0] - cppP[0]);
-cppQ = [ cppR[0],
- cppV[1] - (catch_finger_height - cp_rQ) ];
-cppF = [ cppV[0] + catch_finger_depth, cppC[1] ];
+ly_r = lanyard_half_dia / 2;
+ly_rc = ly_r * 2;
+
+ly_theta = -atan2vector(epp2i - epp1);
+ly_o = epp2i + 3 * ly_r * unitvector2d(epp1 - epp2i);
+
+max_case_bottom_edge_thickness =
+ case_th_bottom
+ + sin(ly_theta) * (epp2i-epp2o)[0];
+
+ly_q_z = -(ly_rc + ly_r);
+ly_re = max_case_bottom_edge_thickness - (-ly_q_z);
+
+ly_oec_y = lanyard_entry_rel_breadth * ly_r;
// prop recess in case
}
}
+module LanyardLanyardProfile(entry=false){
+ hull(){
+ for (xs=[-1,+1] * (entry ? lanyard_entry_rel_breadth : 1))
+ translate(xs * 0.5 * lanyard_half_dia * [1,0])
+ circle(r= lanyard_half_dia/2);
+ }
+}
+
+module LanyardCurveChannelProfile(){
+ translate([0, -ly_r])
+ LanyardLanyardProfile();
+}
+
+module LanyardEntryChannelProfile(){
+ LanyardLanyardProfile(true);
+}
+
+module LanyardMainChannelProfile(){
+ LanyardCurveChannelProfile();
+ difference(){
+ square(center=true, ly_r * [6, 2]);
+ for (xs=[-1,+1])
+ translate(ly_r * [3 * xs, -1])
+ circle(r = ly_r);
+ }
+}
+
+module LanyardEntryOuterProfile(){
+ circleat([ly_re + ly_r, 0], ly_re);
+}
+
+module LanyardEntry(){
+ q_z = ly_q_z;
+ oec_y = ly_oec_y;
+
+ d_x = -ly_rc;
+
+ translate([d_x, 0, q_z]) {
+ intersection(){
+ rotate([90,0,0])
+ rotate_extrude(convexity=10)
+ rotate(90)
+ translate([0, -q_z])
+ LanyardCurveChannelProfile();
+ translate([0,-10,0])
+ cube([20,20,20]);
+ }
+ }
+
+ mirror([0,0,1])
+ translate([0,0,-1])
+ linear_extrude(height=20)
+ rotate(-90)
+ LanyardEntryChannelProfile();
+
+ translate([0, ly_r*2, 0])
+ rotate([90,0,0])
+ linear_extrude(height = ly_r*4){
+ difference(){
+ rectfromto([d_x, q_z], [ly_r, 0]);
+ circleat([d_x, q_z], ly_rc);
+ }
+ }
+
+ translate([0,0,q_z]){
+ for (my=[0,1])
+ mirror([0,my,0]){
+ translate([0, oec_y, 0]){
+ difference(){
+ translate(ly_re * [-1,0,-2])
+ cube(ly_re * [2,1,2]);
+ rotate_extrude(convexity=10)
+ LanyardEntryOuterProfile();
+ }
+ }
+ }
+ difference(){
+ translate([-ly_re, -(oec_y + 0.01), -2*ly_re])
+ cube([ly_re*2, 2*(oec_y + 0.01), 2*ly_re]);
+ for (mx=[0,1])
+ mirror([mx,0,0])
+ rotate([90,0,0])
+ translate([0,0,-10])
+ linear_extrude(height=20)
+ LanyardEntryOuterProfile();
+ }
+ }
+}
+
+module LanyardCutout(l){
+ rotate([0,-90,0])
+ linear_extrude(height=l)
+ rotate(-90)
+ LanyardMainChannelProfile();
+
+ for (ee=[0,1]){
+ translate(ee * l * [-1,0])
+ mirror([ee,0,0])
+ LanyardEntry();
+ }
+}
+
module LidEdgeProfile(){
polygon([ lpp10,
lpp11,
}
module LidEdgeFoldClearanceProfile(){
- polygon([ lpp10,
- lpp11,
- lpp11 + [-20, 0],
- lpp11 + [-20, 20],
- lpp11 + [+20, 20],
- lpp10 + [+20, 0] ]);
+ translate([-lid_fold_clearance_antislop, 0])
+ polygon([ lpp10,
+ lpp11,
+ lpp11 + [-20, 0],
+ lpp11 + [-20, 20],
+ lpp11 + [+20, 20],
+ lpp10 + [+20, 0] ]);
}
module ButtonCoverProfile(){
}
}
-module CatchCatchProfile(){
- hull(){
- for (c=[ cppR, cppQ ])
- circleat(c, cp_rQ);
+module ButtonCoverReinf(){ ////toplevel
+ minkowski(){
+ rotate([90,0,0])
+ linear_extrude(height=0.01)
+ intersection(){
+ ButtonCoverProfile();
+ translate([bppJ[0] + 0.1, -50]) mirror([1,0])
+ square([100,100]);
+ }
+ mirror([0,0,1]) linear_extrude(height=0.01) intersection(){
+ circle(r= lid_buttoncover_reinf);
+ translate([-20,0]) square(40, center=true);
+ }
}
- hull(){
- circleat(lpp12, lp_r12);
- circleat(lpp12 + [5,0], lp_r12);
- rectfromto(cppP, cppP + [5,0.1]);
+}
+
+module ThumbRecessCutProfile(){
+ difference(){
+ polygon([ cppA + [-10,0],
+ cppB + [-10,0],
+ cppB,
+ cppA ]);
+ circleat(epp1, r=case_th_side);
}
- polygon([cppJ, cppS, cppT, cppU, cppV, cppQ, cppR]);
-}
-
-module CatchCutProfile(){
- polygon([ cppB,
- cppA,
- cppD,
- cppF,
- cppF + [0,-10],
- cppF + [-10,-10],
- lpp12 + [-10,0],
- lpp12 + [10,0]
- ]);
}
module Flip_rhs(yn=[0,1]) {
children();
}
-module CatchPortion(width){
- translate([phone_width/2, 0,0])
- rotate([90,0,-90])
- linextr(-width/2, width/2)
- children(0);
+module ThumbRecessApply(ztop){
+ width = thumbrecess_width;
+ w = width + thumbrecess_topcurve_r*2 + 1;
+ translate([phone_width/2, 0,0]){
+ difference(){
+ rotate([90,0,-90])
+ linextr(-w/2, w/2)
+ children(0);
+ translate([0, 50, 0])
+ rotate([90,0,0])
+ linear_extrude(height=100){
+ for (m=[0,1]) mirror([m,0,0]) {
+ hull(){
+ translate([w/2, ztop - thumbrecess_topcurve_r])
+ circle(thumbrecess_topcurve_r);
+ translate([w/2, -50])
+ square(thumbrecess_topcurve_r*2, center=true);
+ }
+ }
+ }
+ }
+ }
}
module CaseBase(){
children();
}
-module PropProfile(gamma, cut=0, rot=0){ ////toplevel
+module PropProfile(gamma, cut=0, rot=0){
PropProfileAssignments(gamma){
//#circleat($prpp3,1);
// screw holes in the hinge arms
HingeScrews();
- // catch striker
- CatchPortion(catch_width + catch_side_gap*2)
- CatchCutProfile();
+ // thumb recess
+ ThumbRecessApply(epp4[1])
+ ThumbRecessCutProfile();
+
+ // lanyard
+ Flip_bot(1)
+ translate([ly_o[0], -(phone_cnr_rad + ly_re), ly_o[1]])
+ rotate([0, ly_theta, 0])
+ rotate([0,0,90])
+ LanyardCutout(lanyard_channel_len);
// prop recess
Flip_rhs(1)
}
module LidAroundEdges(){
- AroundEdges(lpp10[1], lpp13[1] - lpp10[1], 0)
+ AroundEdges(lpp15[1], lpp13[1] - lpp15[1], 0)
children();
}
translate(skew_centre)
multmatrix([[ 1, 0, 0, 0 ],
- [ 0, 1, -lid_close_clearance_skew, 0 ],
+ [ 0, 1, -lid_fold_clearance_skew, 0 ],
[ 0, 0, 1, 0 ],
[ 0, 0, 0, 1 ]])
translate(-skew_centre)
translate([0,0,-10])
linear_extrude(height= 20)
ButtonPlan($button_l, 1,0);
- rotate([90,0,0])
- translate([0,0,-100])
- linear_extrude(height= 200)
- ButtonCoverProfile();
+ union(){
+ rotate([90,0,0])
+ translate([0,0,-100])
+ linear_extrude(height= 200)
+ ButtonCoverProfile();
+ hull()
+ for (y= [-1,+1] * (($button_l + button_l_fudge)/2
+ - lid_buttoncover_reinf))
+ translate([0,y,0])
+ ButtonCoverReinf();
+ }
}
}
LidEdgeProfile();
HingeLidProfile();
}
-
- // catch
- CatchPortion(catch_width)
- CatchCatchProfile();
}
Struts(lpp10[0] + strut_min_at_end, lpp13[1], -case_th_lid);
%HingeLever();
}
+module DemoLanyardCutout(){ ////toplevel
+ LanyardCutout(25);
+}
+
module DemoHingedFrame(){ ///toplevel
color("red") TestFrameCase();
translate([0,0, -2*hp_k])
%EdgeProfile();
KeeperProfile();
translate([0,0,-1]) color("black") KeeperProfile(1);
+ translate(ly_o){
+ rotate(-ly_theta){
+ translate([0,0,+1]) color("purple") LanyardMainChannelProfile();
+ translate([0,0,+2]) color("red") LanyardCurveChannelProfile();
+ translate([0, ly_q_z]){
+ translate([0,0,-1]) color("blue") LanyardEntryChannelProfile();
+ translate([ly_oec_y,0,-2]) color("black") LanyardEntryOuterProfile();
+ }
+ }
+ }
+ translate([0,0,-5]) color("white") translate(epp2i)
+ rotate(-ly_theta)
+ rectfromto([-15, 0],
+ [+15, -max_case_bottom_edge_thickness]);
+
+ translate([0,20]) {
+ LanyardMainChannelProfile();
+ translate([0,0,1]) color("purple") LanyardCurveChannelProfile();
+ translate([0,0,-1]) color("red") LanyardEntryChannelProfile();
+ }
translate([20,0]) {
LidEdgeProfile();
translate([20,-30]) {
%EdgeProfile();
%LidEdgeProfile();
- //translate([0,0,1]) CatchCutProfile();
- color("blue") CatchCatchProfile();
- color("red") difference(){ EdgeProfile(); CatchCutProfile(); }
+ //translate([0,0,1]) ThumbRecessCutProfile();
+ translate([0,0,+1]) color("red")
+ difference(){ EdgeProfile(); ThumbRecessCutProfile(); }
}
translate([40,-30]) {