include <utils.scad>
-lip_height = 2.0 - 0.15;
-lip_depth = 2.5 /*?*/ - 0.30;
-neck_width = 26.5 - 0.55;
-neck_length = 1.5 + 0.50;
+mount_lip_height = 2.0 - 0.15;
+mount_lip_depth = 2.5 /*?*/ - 0.30;
+mount_neck_width = 26.5 - 0.55;
+mount_neck_length = 1.5 + 0.50;
-slope = .65;
-extra_slope = 3;
+mount_slope = .65;
+mount_extra_slope = 3;
-demo_ceil = 4;
+mount_demo_ceil = 4;
// calculated
-nep0 = [0,0];
-nep1 = nep0 + [0,1] * neck_length;
-nep7 = nep0 + [1,0] * lip_depth;
-nep2 = [ nep7[0] + extra_slope, nep1[1] + slope * (nep7[0] + extra_slope - nep1[0]) ];
-nep3 = nep2 + [0, 0.1];
-nep4 = [ nep0[0]-1, nep3[1] ];
-nep6 = nep7 + [0,-1] * lip_height;
-nep5 = [ nep4[0], nep6[1] ];
-nepm = [ nep0[0], nep3[1] ];
+mnep0 = [0,0];
+mnep1 = mnep0 + [0,1] * mount_neck_length;
+mnep7 = mnep0 + [1,0] * mount_lip_depth;
+mnep2 = [ mnep7[0] + mount_extra_slope, mnep1[1] + mount_slope * (mnep7[0] + mount_extra_slope - mnep1[0]) ];
+mnep3 = mnep2 + [0, 0.1];
+mnep4 = [ mnep0[0]-1, mnep3[1] ];
+mnep6 = mnep7 + [0,-1] * mount_lip_height;
+mnep5 = [ mnep4[0], mnep6[1] ];
+mnepm = [ mnep0[0], mnep3[1] ];
-total_height = nep2[1] - nep6[1];
-nep_z_offset = -nep2[1];
-nep_side_offset = [ neck_width/2, nep_z_offset ];
+mount_total_height = mnep2[1] - mnep6[1];
+mnep_z_offset = -mnep2[1];
+mnep_side_offset = [ mount_neck_width/2, mnep_z_offset ];
module NeckEdgePlan() {
- polygon([ nep0,
- nep1,
- nep2,
- nep3,
- nep4,
- nep5,
- nep6,
- nep7 ]);
+ polygon([ mnep0,
+ mnep1,
+ mnep2,
+ mnep3,
+ mnep4,
+ mnep5,
+ mnep6,
+ mnep7 ]);
}
module Neck() {
linextr_y_xz(-100,100,convexity=10){
for (m=[0,1]) {
mirror([m,0]) {
- translate(nep_side_offset) NeckEdgePlan();
- rectfromto([-0.1, -total_height],
- nep_side_offset + nepm);
+ translate(mnep_side_offset) NeckEdgePlan();
+ rectfromto([-0.1, -mount_total_height],
+ mnep_side_offset + mnepm);
}
}
}
}
module DemoCeil() {
- c = demo_ceil + extra_slope;
+ c = mount_demo_ceil + mount_extra_slope;
linextr(0, 0.8) {
- square(neck_width + 2*(demo_ceil + extra_slope),
+ square(mount_neck_width + 2*(mount_demo_ceil + mount_extra_slope),
center=true);
}
}