adafruit-powerboost: 1000: wip

[reprap-play.git] / adafruit-powerboost-1000.scad

diff --git a/adafruit-powerboost-1000.scad b/adafruit-powerboost-1000.scad
index 1cdecc4c288313e3ee588f7f2403ea3325602e6c..e41d7ddde24054f8e2f0a58a9fd9b30fd9890f60 100644 (file)
--- a/adafruit-powerboost-1000.scad
+++ b/adafruit-powerboost-1000.scad
@@ -9,10 +9,70 @@ psu_hole_pos = [ 2.05, // from back edge of psu_sz[0]
                 0.55 * 0.5 * 25.4, // from centreline
                 ];
 
+psu_led_low_x = 4;
+
+psu_led_usbend_y_min = 4.5;
+psu_led_chrg_min_x = -1.0;
+psu_led_chrg_max_x = 3.0;
+psu_led_chrg_both_sz_y = 7.0;
+
+psu_led_low_sz_x = 4.5;
+psu_led_low_min_y = -1.5;
+psu_led_low_max_y = 2.5;
+
+psu_led_baffle_th = 0.8;
+psu_led_baffle_ends = 1.5;
+
+psu_baffle_cnr_y = 7.45; // from connector end
+psu_usbend_led_x = 4.5;
+psu_baffle_th = [ 0.8, 3.5 ];
+psu_usbend_led_y = 4.5;
+psu_innerend_led_depth = 10;
+
 // ----- calculated -----
 
+psu_usbend_led_depth = psu_baffle_cnr_y*2 - psu_usbend_led_x;
+
 module PsuLedBafflePlan(){
+  AtPsuMountCorner(0,0) {
+    translate([ (psu_led_chrg_min_x + psu_led_chrg_max_x)/2,
+              psu_led_usbend_y_min + psu_led_chrg_both_sz_y/2 ])
+      square(center=true,
+            [ psu_led_chrg_max_x - psu_led_chrg_min_x
+              + psu_led_baffle_ends*2,
+              psu_led_baffle_th ]);
+  }
 }
 
 module PsuLedWindowsPlanCore(){
+  difference(){
+    union(){
+      // Two LEDs one side of inlet connector
+      // "Full" (near edge) and "Chrg" (inner)
+      AtPsuMountCorner(0,0) {
+       translate([0, psu_led_usbend_y_min ])
+         rectfromto([ psu_led_chrg_min_x, 0 ],
+                    [ psu_led_chrg_max_x,
+                      psu_led_chrg_both_sz_y ]);
+      }
+
+      // One LED, "Low", other side of inlet connector
+      AtPsuMountCorner(1,0) {
+       translate([0, psu_led_usbend_y_min ])
+         rectfromto([ 0,
+                      psu_led_low_min_y ],
+                    [ psu_led_low_sz_x,
+                      psu_led_low_max_y ]);
+      }
+
+      // One LED, PWR, near outlet USB pads
+      AtPsuMountCorner(0,1){
+       rectfromto([0,0],
+                  [psu_sz[0]/2 - psu_hole_pos[1] - psu_hole_dia/2,
+                    psu_innerend_led_depth]);
+      }
+    }
+//    translate([0, -psu_sz[1]/2])
+//      square(center=true, [psu_baffle_th[1], psu_sz[1]]);;
+  }
 }