// -*- C -*-
-psu_sz_nom = [ 21.59, 35.56 ];
+psu_sz_nom = [ 11.43*2, 36.20 ];
//// toplevels-from:
include <adafruit-powerboost-common.scad>
0.55 * 0.5 * 25.4, // from centreline
];
-psu_baffle_cnr_y = 7.45; // from connector end
+psu_led_low_x = 4;
+
+psu_led_usbend_y_min = 4.5;
+psu_led_chrg_min_x = -1.0;
+psu_led_chrg_max_x = 3.0;
+psu_led_chrg_both_sz_y = 7.0;
+
+psu_led_low_sz_x = 4.5;
+psu_led_low_min_y = -1.5;
+psu_led_low_max_y = 2.5;
+
+psu_led_baffle_th = 0.8;
+psu_led_baffle_ends = 1.5;
+
psu_baffle_th = [ 0.8, 3.5 ];
-psu_usbend_led_x = 4.5;
-psu_innerend_led_depth = 10;
+psu_innerend_led_depth = 7;
// ----- calculated -----
-psu_usbend_led_depth = psu_baffle_cnr_y*2 - psu_usbend_led_x;
-
module PsuLedBafflePlan(){
+ AtPsuMountCorner(0,0) {
+ translate([ (psu_led_chrg_min_x + psu_led_chrg_max_x)/2,
+ psu_led_usbend_y_min + psu_led_chrg_both_sz_y/2 ])
+ square(center=true,
+ [ psu_led_chrg_max_x - psu_led_chrg_min_x
+ + psu_led_baffle_ends*2,
+ psu_led_baffle_th ]);
+ }
}
module PsuLedWindowsPlanCore(){
difference(){
union(){
- // Two LEDs incl "Chrg", one side of inlet connector
+ // Two LEDs one side of inlet connector
+ // "Full" (near edge) and "Chrg" (inner)
AtPsuMountCorner(0,0) {
- rectfromto([ -(psu_board_support_wall + 0.1),
- +psu_usbend_led_x ],
- [ psu_sz[0]/2,
- +psu_usbend_led_depth ]);
+ translate([0, psu_led_usbend_y_min ])
+ rectfromto([ psu_led_chrg_min_x, 0 ],
+ [ psu_led_chrg_max_x,
+ psu_led_chrg_both_sz_y ]);
}
// One LED, "Low", other side of inlet connector
AtPsuMountCorner(1,0) {
- sz = psu_baffle_cnr_y - psu_board_support_wall - psu_baffle_th[0];
- translate([0, psu_baffle_cnr_y])
- rectfromto([ -(psu_board_support_wall + 0.1),
- -sz/2 ],
- [ psu_sz[0]/2,
- +sz/2 ]);
+ translate([0, psu_led_usbend_y_min ])
+ rectfromto([ 0,
+ psu_led_low_min_y ],
+ [ psu_led_low_sz_x,
+ psu_led_low_max_y ]);
}
// One LED, PWR, near outlet USB pads
- AtPsuMountCorner(1,1){
+ AtPsuMountCorner(0,1){
rectfromto([0,0],
[psu_sz[0]/2 - psu_hole_pos[1] - psu_hole_dia/2,
- psu_innerend_led_depth]);
+ psu_innerend_led_depth]);
}
}
-// translate([0, -psu_sz[1]/2])
-// square(center=true, [psu_baffle_th[1], psu_sz[1]]);;
}
}
+
+module PsuLedLegendsPlan(){
+ mirror([1,0])
+ text("\u2300\u23fb", font="Noto Regular");
+}