-#ifndef LANGUAGE_H
-#define LANGUAGE_H
-
-// Languages
-// 1 Custom (For you to add your own messages)
-// 2 English
-// 3 French (Waiting translation)
-// 4 German (Waiting translation)
-// 5 Etc
-
-#define LANGUAGE_CHOICE 1 // Pick your language from the list above
-
-#define PROTOCOL_VERSION "1.0"
-
-#if MOTHERBOARD == 7 || MOTHERBOARD == 71
- #define MACHINE_NAME "Ultimaker"
- #define FIRMWARE_URL "http://firmware.ultimaker.com"
-#else
- #define MACHINE_NAME "Mendel"
- #define FIRMWARE_URL "http://www.mendel-parts.com"
-#endif
-
-#define STRINGIFY_(n) #n
-#define STRINGIFY(n) STRINGIFY_(n)
-
-#if LANGUAGE_CHOICE == 1
-
-// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Ready."
- #define MSG_SD_INSERTED "Card inserted"
- #define MSG_SD_REMOVED "Card removed"
- #define MSG_MAIN " Main \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Disable Steppers"
- #define MSG_AUTO_HOME " Auto Home"
- #define MSG_SET_ORIGIN " Set Origin"
- #define MSG_COOLDOWN " Cooldown"
- #define MSG_EXTRUDE " Extrude"
- #define MSG_PREHEAT_PLA " Preheat PLA"
- #define MSG_PREHEAT_ABS " Preheat ABS"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
- #define MSG_SPEED " Speed:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_NOZZLE1 " \002Nozzle2:"
- #define MSG_NOZZLE2 " \002Nozzle3:"
- #define MSG_BED " \002Bed:"
- #define MSG_FAN_SPEED " Fan speed:"
- #define MSG_FLOW " Flow:"
- #define MSG_CONTROL " Control \003"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
- #define MSG_VMAX " Vmax "
- #define MSG_X "x:"
- #define MSG_Y "y:"
- #define MSG_Z "z:"
- #define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-retract:"
- #define MSG_XSTEPS " Xsteps/mm:"
- #define MSG_YSTEPS " Ysteps/mm:"
- #define MSG_ZSTEPS " Zsteps/mm:"
- #define MSG_ESTEPS " Esteps/mm:"
- #define MSG_MAIN_WIDE " Main \003"
- #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
- #define MSG_MOTION_WIDE " Motion \x7E"
- #define MSG_STORE_EPROM " Store memory"
- #define MSG_LOAD_EPROM " Load memory"
- #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
- #define MSG_REFRESH "\004Refresh"
- #define MSG_WATCH " Watch \003"
- #define MSG_PREPARE " Prepare \x7E"
- #define MSG_PREPARE_ALT " Prepare \003"
- #define MSG_CONTROL_ARROW " Control \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_STOP_PRINT " Stop Print \x7E"
- #define MSG_CARD_MENU " Card Menu \x7E"
- #define MSG_NO_CARD " No Card"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
- #define MSG_DWELL "Sleep..."
- #define MSG_USERWAIT "Wait for user..."
- #define MSG_NO_MOVE "No move."
- #define MSG_PART_RELEASE "Partial Release"
- #define MSG_KILLED "KILLED. "
- #define MSG_STOPPED "STOPPED. "
- #define MSG_PREHEAT_PLA " Preheat PLA"
- #define MSG_PREHEAT_ABS " Preheat ABS"
- #define MSG_STEPPER_RELEASED "Released."
-
-
-// Serial Console Messages
-
- #define MSG_Enqueing "enqueing \""
- #define MSG_POWERUP "PowerUp"
- #define MSG_EXTERNAL_RESET " External Reset"
- #define MSG_BROWNOUT_RESET " Brown out Reset"
- #define MSG_WATCHDOG_RESET " Watchdog Reset"
- #define MSG_SOFTWARE_RESET " Software Reset"
- #define MSG_MARLIN "Marlin "
- #define MSG_AUTHOR " | Author: "
- #define MSG_CONFIGURATION_VER " Last Updated: "
- #define MSG_FREE_MEMORY " Free Memory: "
- #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define MSG_OK "ok"
- #define MSG_FILE_SAVED "Done saving file."
- #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
- #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
- #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
- #define MSG_FILE_PRINTED "Done printing file"
- #define MSG_BEGIN_FILE_LIST "Begin file list"
- #define MSG_END_FILE_LIST "End file list"
- #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
- #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
- #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
- #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
- #define MSG_HEATING "Heating..."
- #define MSG_HEATING_COMPLETE "Heating done."
- #define MSG_BED_HEATING "Bed Heating."
- #define MSG_BED_DONE "Bed done."
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Count X:"
- #define MSG_ERR_KILLED "Printer halted. kill() called !!"
- #define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
- #define MSG_RESEND "Resend:"
- #define MSG_UNKNOWN_COMMAND "Unknown command:\""
- #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
- #define MSG_INVALID_EXTRUDER "Invalid extruder"
- #define MSG_X_MIN "x_min:"
- #define MSG_X_MAX "x_max:"
- #define MSG_Y_MIN "y_min:"
- #define MSG_Y_MAX "y_max:"
- #define MSG_Z_MIN "z_min:"
- #define MSG_Z_MAX "z_max:"
-
- #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
- #define MSG_SD_INIT_FAIL "SD init fail"
- #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
- #define MSG_SD_OPENROOT_FAIL "openRoot failed"
- #define MSG_SD_CARD_OK "SD card ok"
- #define MSG_SD_WORKDIR_FAIL "workDir open failed"
- #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
- #define MSG_SD_FILE_OPENED "File opened:"
- #define MSG_SD_SIZE " Size:"
- #define MSG_SD_FILE_SELECTED "File selected"
- #define MSG_SD_WRITE_TO_FILE "Writing to file: "
- #define MSG_SD_PRINTING_BYTE "SD printing byte "
- #define MSG_SD_NOT_PRINTING "Not SD printing"
- #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
- #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
-
- #define MSG_STEPPER_TO_HIGH "Steprate to high : "
- #define MSG_ENDSTOPS_HIT "endstops hit: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
- #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
-
-#endif
-#if LANGUAGE_CHOICE == 4
-
-// LCD Menu Messages
-
- #define WELCOME_MSG MACHINE_NAME " Ready."
-
- #define MSG_SD_INSERTED "Card inserted"
- #define MSG_SD_REMOVED "Card removed"
- #define MSG_MAIN " Main \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Stepper abschalten"
- #define MSG_AUTO_HOME " Auto Heim"
- #define MSG_SET_ORIGIN " Position setzen"
- #define MSG_PREHEAT_PLA " Aufheizen PLA"
- #define MSG_PREHEAT_ABS " Aufheizen ABS"
- #define MSG_COOLDOWN " Abkuehlen"
- #define MSG_EXTRUDE " Extrude"
- #define MSG_PREHEAT_PLA " Preheat PLA"
- #define MSG_PREHEAT_ABS " Preheat ABS"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
- #define MSG_MOVE_AXIS " Achsen verfahren \x7E"
- #define MSG_SPEED " Geschw:"
- #define MSG_NOZZLE " \002Duese:"
- #define MSG_NOZZLE1 " \002Duese2:"
- #define MSG_NOZZLE2 " \002Duese3:"
- #define MSG_BED " \002Bett:"
- #define MSG_FAN_SPEED " Luefter geschw.:"
- #define MSG_FLOW " Fluss:"
- #define MSG_CONTROL " Kontrolle \003"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Faktor:"
- #define MSG_AUTOTEMP " AutoTemp:"
- #define MSG_ON "Ein "
- #define MSG_OFF "Aus "
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
- #define MSG_VMAX " Vmax "
- #define MSG_X "x:"
- #define MSG_Y "y:"
- #define MSG_Z "z:"
- #define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-retract:"
- #define MSG_XSTEPS " Xsteps/mm:"
- #define MSG_YSTEPS " Ysteps/mm:"
- #define MSG_ZSTEPS " Zsteps/mm:"
- #define MSG_ESTEPS " Esteps/mm:"
- #define MSG_MAIN_WIDE " Main \003"
- #define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
- #define MSG_MOTION_WIDE " Motion \x7E"
- #define MSG_STORE_EPROM " EPROM speichern"
- #define MSG_LOAD_EPROM " EPROM laden"
- #define MSG_RESTORE_FAILSAFE " Standard Konfig."
- #define MSG_REFRESH "\004Refresh"
- #define MSG_WATCH " Beobachten \003"
- #define MSG_PREPARE " Prepare \x7E"
- #define MSG_PREPARE_ALT " Prepare \003"
- #define MSG_CONTROL_ARROW " Control \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_STOP_PRINT " Druck stoppen \x7E"
- #define MSG_CARD_MENU " SDKarten Menue \x7E"
- #define MSG_NO_CARD " Keine SDKarte"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur."
- #define MSG_DWELL "DWELL..."
- #define MSG_NO_MOVE "No move."
- #define MSG_PART_RELEASE "Partial Release"
- #define MSG_KILLED "KILLED. "
- #define MSG_STOPPED "STOPPED. "
- #define MSG_PREHEAT_PLA " Preheat PLA"
- #define MSG_PREHEAT_ABS " Preheat ABS"
- #define MSG_STEPPER_RELEASED "Released."
-
-
-// Serial Console Messages
-
- #define MSG_Enqueing "enqueing \""
- #define MSG_POWERUP "PowerUp"
- #define MSG_EXTERNAL_RESET " External Reset"
- #define MSG_BROWNOUT_RESET " Brown out Reset"
- #define MSG_WATCHDOG_RESET " Watchdog Reset"
- #define MSG_SOFTWARE_RESET " Software Reset"
- #define MSG_MARLIN "Marlin: "
- #define MSG_AUTHOR " | Author: "
- #define MSG_CONFIGURATION_VER " Last Updated: "
- #define MSG_FREE_MEMORY " Free Memory: "
- #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define MSG_OK "ok"
- #define MSG_FILE_SAVED "Done saving file."
- #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
- #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
- #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
- #define MSG_FILE_PRINTED "Done printing file"
- #define MSG_BEGIN_FILE_LIST "Begin file list"
- #define MSG_END_FILE_LIST "End file list"
- #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
- #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
- #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
- #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
- #define MSG_HEATING "Heating..."
- #define MSG_HEATING_COMPLETE "Heating done."
- #define MSG_BED_HEATING "Bed Heating."
- #define MSG_BED_DONE "Bed done."
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Count X:"
- #define MSG_ERR_KILLED "Printer halted. kill() called !!"
- #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
- #define MSG_RESEND "Resend:"
- #define MSG_UNKNOWN_COMMAND "Unknown command:\""
- #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
- #define MSG_INVALID_EXTRUDER "Invalid extruder"
- #define MSG_X_MIN "x_min:"
- #define MSG_X_MAX "x_max:"
- #define MSG_Y_MIN "y_min:"
- #define MSG_Y_MAX "y_max:"
- #define MSG_Z_MIN "z_min:"
- #define MSG_Z_MAX "z_max:"
-
- #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
- #define MSG_SD_INIT_FAIL "SD init fail"
- #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
- #define MSG_SD_OPENROOT_FAIL "openRoot failed"
- #define MSG_SD_CARD_OK "SD card ok"
- #define MSG_SD_WORKDIR_FAIL "workDir open failed"
- #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
- #define MSG_SD_FILE_OPENED "File opened:"
- #define MSG_SD_SIZE " Size:"
- #define MSG_SD_FILE_SELECTED "File selected"
- #define MSG_SD_WRITE_TO_FILE "Writing to file: "
- #define MSG_SD_PRINTING_BYTE "SD printing byte "
- #define MSG_SD_NOT_PRINTING "Not SD printing"
- #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
- #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
-
- #define MSG_STEPPER_TO_HIGH "Steprate to high : "
- #define MSG_ENDSTOPS_HIT "endstops hit: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
- #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
-
-#endif
+#ifndef LANGUAGE_H\r
+#define LANGUAGE_H\r
+\r
+// Languages\r
+// 1 Custom (For you to add your own messages)\r
+// 2 English \r
+// 3 French (Waiting translation)\r
+// 4 German (Waiting translation)\r
+// 5 Etc\r
+\r
+#define LANGUAGE_CHOICE 1 // Pick your language from the list above\r
+\r
+#define PROTOCOL_VERSION "1.0"\r
+\r
+#if MOTHERBOARD == 7 || MOTHERBOARD == 71\r
+ #define MACHINE_NAME "Ultimaker"\r
+ #define FIRMWARE_URL "http://firmware.ultimaker.com"\r
+#else\r
+ #define MACHINE_NAME "Mendel"\r
+ #define FIRMWARE_URL "http://www.mendel-parts.com"\r
+#endif\r
+\r
+#define STRINGIFY_(n) #n\r
+#define STRINGIFY(n) STRINGIFY_(n)\r
+\r
+#if LANGUAGE_CHOICE == 1\r
+\r
+// LCD Menu Messages\r
+ #define WELCOME_MSG MACHINE_NAME " Ready."\r
+ #define MSG_SD_INSERTED "Card inserted"\r
+ #define MSG_SD_REMOVED "Card removed"\r
+ #define MSG_MAIN " Main \003"\r
+ #define MSG_AUTOSTART " Autostart"\r
+ #define MSG_DISABLE_STEPPERS " Disable Steppers"\r
+ #define MSG_AUTO_HOME " Auto Home"\r
+ #define MSG_SET_ORIGIN " Set Origin"\r
+ #define MSG_COOLDOWN " Cooldown"\r
+ #define MSG_EXTRUDE " Extrude"\r
+ #define MSG_PREHEAT_PLA " Preheat PLA"\r
+ #define MSG_PREHEAT_ABS " Preheat ABS"\r
+ #define MSG_MOVE_AXIS " Move Axis \x7E"\r
+ #define MSG_SPEED " Speed:"\r
+ #define MSG_NOZZLE " \002Nozzle:"\r
+ #define MSG_NOZZLE1 " \002Nozzle2:"\r
+ #define MSG_NOZZLE2 " \002Nozzle3:"\r
+ #define MSG_BED " \002Bed:"\r
+ #define MSG_FAN_SPEED " Fan speed:"\r
+ #define MSG_FLOW " Flow:"\r
+ #define MSG_CONTROL " Control \003"\r
+ #define MSG_MIN " \002 Min:"\r
+ #define MSG_MAX " \002 Max:"\r
+ #define MSG_FACTOR " \002 Fact:"\r
+ #define MSG_AUTOTEMP " Autotemp:"\r
+ #define MSG_ON "On "\r
+ #define MSG_OFF "Off"\r
+ #define MSG_PID_P " PID-P: "\r
+ #define MSG_PID_I " PID-I: "\r
+ #define MSG_PID_D " PID-D: "\r
+ #define MSG_PID_C " PID-C: "\r
+ #define MSG_ACC " Acc:"\r
+ #define MSG_VXY_JERK " Vxy-jerk: "\r
+ #define MSG_VMAX " Vmax "\r
+ #define MSG_X "x:"\r
+ #define MSG_Y "y:"\r
+ #define MSG_Z "z:"\r
+ #define MSG_E "e:"\r
+ #define MSG_VMIN " Vmin:"\r
+ #define MSG_VTRAV_MIN " VTrav min:"\r
+ #define MSG_AMAX " Amax "\r
+ #define MSG_A_RETRACT " A-retract:"\r
+ #define MSG_XSTEPS " Xsteps/mm:"\r
+ #define MSG_YSTEPS " Ysteps/mm:"\r
+ #define MSG_ZSTEPS " Zsteps/mm:"\r
+ #define MSG_ESTEPS " Esteps/mm:"\r
+ #define MSG_MAIN_WIDE " Main \003"\r
+ #define MSG_RECTRACT_WIDE " Rectract \x7E"\r
+ #define MSG_TEMPERATURE_WIDE " Temperature \x7E"\r
+ #define MSG_MOTION_WIDE " Motion \x7E"\r
+ #define MSG_STORE_EPROM " Store memory"\r
+ #define MSG_LOAD_EPROM " Load memory"\r
+ #define MSG_RESTORE_FAILSAFE " Restore Failsafe"\r
+ #define MSG_REFRESH "\004Refresh"\r
+ #define MSG_WATCH " Watch \003"\r
+ #define MSG_PREPARE " Prepare \x7E"\r
+ #define MSG_PREPARE_ALT " Prepare \003"\r
+ #define MSG_CONTROL_ARROW " Control \x7E"\r
+ #define MSG_RETRACT_ARROW " Control \x7E"\r
+ #define MSG_TUNE " Tune \x7E"\r
+ #define MSG_STOP_PRINT " Stop Print \x7E"\r
+ #define MSG_CARD_MENU " Card Menu \x7E"\r
+ #define MSG_NO_CARD " No Card"\r
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."\r
+ #define MSG_DWELL "Sleep..."\r
+ #define MSG_USERWAIT "Wait for user..."\r
+ #define MSG_NO_MOVE "No move."\r
+ #define MSG_PART_RELEASE "Partial Release"\r
+ #define MSG_KILLED "KILLED. "\r
+ #define MSG_STOPPED "STOPPED. "\r
+ #define MSG_PREHEAT_PLA " Preheat PLA"\r
+ #define MSG_PREHEAT_ABS " Preheat ABS"\r
+ #define MSG_STEPPER_RELEASED "Released."\r
+ #define MSG_CONTROL_RETRACT " Retract mm:"\r
+ #define MSG_CONTROL_RETRACTF " Retract F:"\r
+ #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"\r
+ #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"\r
+ #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"\r
+ #define MSG_AUTORETRACT " AutoRetr.:"\r
+\r
+// Serial Console Messages\r
+\r
+ #define MSG_Enqueing "enqueing \""\r
+ #define MSG_POWERUP "PowerUp"\r
+ #define MSG_EXTERNAL_RESET " External Reset"\r
+ #define MSG_BROWNOUT_RESET " Brown out Reset"\r
+ #define MSG_WATCHDOG_RESET " Watchdog Reset"\r
+ #define MSG_SOFTWARE_RESET " Software Reset"\r
+ #define MSG_MARLIN "Marlin "\r
+ #define MSG_AUTHOR " | Author: "\r
+ #define MSG_CONFIGURATION_VER " Last Updated: "\r
+ #define MSG_FREE_MEMORY " Free Memory: "\r
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "\r
+ #define MSG_OK "ok"\r
+ #define MSG_FILE_SAVED "Done saving file."\r
+ #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"\r
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"\r
+ #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"\r
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"\r
+ #define MSG_FILE_PRINTED "Done printing file"\r
+ #define MSG_BEGIN_FILE_LIST "Begin file list"\r
+ #define MSG_END_FILE_LIST "End file list"\r
+ #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "\r
+ #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "\r
+ #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"\r
+ #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "\r
+ #define MSG_HEATING "Heating..."\r
+ #define MSG_HEATING_COMPLETE "Heating done."\r
+ #define MSG_BED_HEATING "Bed Heating."\r
+ #define MSG_BED_DONE "Bed done."\r
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"\r
+ #define MSG_COUNT_X " Count X:"\r
+ #define MSG_ERR_KILLED "Printer halted. kill() called !!"\r
+ #define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"\r
+ #define MSG_RESEND "Resend:"\r
+ #define MSG_UNKNOWN_COMMAND "Unknown command:\""\r
+ #define MSG_ACTIVE_EXTRUDER "Active Extruder: "\r
+ #define MSG_INVALID_EXTRUDER "Invalid extruder"\r
+ #define MSG_X_MIN "x_min:"\r
+ #define MSG_X_MAX "x_max:"\r
+ #define MSG_Y_MIN "y_min:"\r
+ #define MSG_Y_MAX "y_max:"\r
+ #define MSG_Z_MIN "z_min:"\r
+ #define MSG_Z_MAX "z_max:"\r
+\r
+ #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"\r
+ #define MSG_SD_INIT_FAIL "SD init fail"\r
+ #define MSG_SD_VOL_INIT_FAIL "volume.init failed"\r
+ #define MSG_SD_OPENROOT_FAIL "openRoot failed"\r
+ #define MSG_SD_CARD_OK "SD card ok"\r
+ #define MSG_SD_WORKDIR_FAIL "workDir open failed"\r
+ #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "\r
+ #define MSG_SD_FILE_OPENED "File opened:"\r
+ #define MSG_SD_SIZE " Size:"\r
+ #define MSG_SD_FILE_SELECTED "File selected"\r
+ #define MSG_SD_WRITE_TO_FILE "Writing to file: "\r
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "\r
+ #define MSG_SD_NOT_PRINTING "Not SD printing"\r
+ #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"\r
+ #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"\r
+\r
+ #define MSG_STEPPER_TO_HIGH "Steprate to high : "\r
+ #define MSG_ENDSTOPS_HIT "endstops hit: "\r
+ #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"\r
+ #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"\r
+\r
+#endif\r
+#if LANGUAGE_CHOICE == 4\r
+\r
+// LCD Menu Messages\r
+\r
+ #define WELCOME_MSG MACHINE_NAME " Ready."\r
+\r
+ #define MSG_SD_INSERTED "Card inserted"\r
+ #define MSG_SD_REMOVED "Card removed"\r
+ #define MSG_MAIN " Main \003"\r
+ #define MSG_AUTOSTART " Autostart"\r
+ #define MSG_DISABLE_STEPPERS " Stepper abschalten"\r
+ #define MSG_AUTO_HOME " Auto Heim"\r
+ #define MSG_SET_ORIGIN " Position setzen"\r
+ #define MSG_PREHEAT_PLA " Aufheizen PLA"\r
+ #define MSG_PREHEAT_ABS " Aufheizen ABS"\r
+ #define MSG_COOLDOWN " Abkuehlen"\r
+ #define MSG_EXTRUDE " Extrude"\r
+ #define MSG_PREHEAT_PLA " Preheat PLA"\r
+ #define MSG_PREHEAT_ABS " Preheat ABS"\r
+ #define MSG_MOVE_AXIS " Move Axis \x7E"\r
+ #define MSG_MOVE_AXIS " Achsen verfahren \x7E"\r
+ #define MSG_SPEED " Geschw:"\r
+ #define MSG_NOZZLE " \002Duese:"\r
+ #define MSG_NOZZLE1 " \002Duese2:"\r
+ #define MSG_NOZZLE2 " \002Duese3:"\r
+ #define MSG_BED " \002Bett:"\r
+ #define MSG_FAN_SPEED " Luefter geschw.:"\r
+ #define MSG_FLOW " Fluss:"\r
+ #define MSG_CONTROL " Kontrolle \003"\r
+ #define MSG_MIN " \002 Min:"\r
+ #define MSG_MAX " \002 Max:"\r
+ #define MSG_FACTOR " \002 Faktor:"\r
+ #define MSG_AUTOTEMP " AutoTemp:"\r
+ #define MSG_ON "Ein "\r
+ #define MSG_OFF "Aus "\r
+ #define MSG_PID_P " PID-P: "\r
+ #define MSG_PID_I " PID-I: "\r
+ #define MSG_PID_D " PID-D: "\r
+ #define MSG_PID_C " PID-C: "\r
+ #define MSG_ACC " Acc:"\r
+ #define MSG_VXY_JERK " Vxy-jerk: "\r
+ #define MSG_VMAX " Vmax "\r
+ #define MSG_X "x:"\r
+ #define MSG_Y "y:"\r
+ #define MSG_Z "z:"\r
+ #define MSG_E "e:"\r
+ #define MSG_VMIN " Vmin:"\r
+ #define MSG_VTRAV_MIN " VTrav min:"\r
+ #define MSG_AMAX " Amax "\r
+ #define MSG_A_RETRACT " A-retract:"\r
+ #define MSG_XSTEPS " Xsteps/mm:"\r
+ #define MSG_YSTEPS " Ysteps/mm:"\r
+ #define MSG_ZSTEPS " Zsteps/mm:"\r
+ #define MSG_ESTEPS " Esteps/mm:"\r
+ #define MSG_MAIN_WIDE " Main \003"\r
+ #define MSG_TEMPERATURE_WIDE " Temperatur \x7E"\r
+ #define MSG_MOTION_WIDE " Motion \x7E"\r
+ #define MSG_STORE_EPROM " EPROM speichern"\r
+ #define MSG_LOAD_EPROM " EPROM laden"\r
+ #define MSG_RESTORE_FAILSAFE " Standard Konfig."\r
+ #define MSG_REFRESH "\004Refresh"\r
+ #define MSG_WATCH " Beobachten \003"\r
+ #define MSG_PREPARE " Prepare \x7E"\r
+ #define MSG_PREPARE_ALT " Prepare \003"\r
+ #define MSG_CONTROL_ARROW " Control \x7E"\r
+ \r
+ #define MSG_TUNE " Tune \x7E"\r
+ #define MSG_STOP_PRINT " Druck stoppen \x7E"\r
+ #define MSG_CARD_MENU " SDKarten Menue \x7E"\r
+ #define MSG_NO_CARD " Keine SDKarte"\r
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur."\r
+ #define MSG_DWELL "DWELL..." \r
+ #define MSG_NO_MOVE "No move."\r
+ #define MSG_PART_RELEASE "Partial Release"\r
+ #define MSG_KILLED "KILLED. "\r
+ #define MSG_STOPPED "STOPPED. "\r
+ #define MSG_PREHEAT_PLA " Preheat PLA"\r
+ #define MSG_PREHEAT_ABS " Preheat ABS"\r
+ #define MSG_STEPPER_RELEASED "Released."\r
+ \r
+\r
+\r
+// Serial Console Messages\r
+\r
+ #define MSG_Enqueing "enqueing \""\r
+ #define MSG_POWERUP "PowerUp"\r
+ #define MSG_EXTERNAL_RESET " External Reset"\r
+ #define MSG_BROWNOUT_RESET " Brown out Reset"\r
+ #define MSG_WATCHDOG_RESET " Watchdog Reset"\r
+ #define MSG_SOFTWARE_RESET " Software Reset"\r
+ #define MSG_MARLIN "Marlin: "\r
+ #define MSG_AUTHOR " | Author: "\r
+ #define MSG_CONFIGURATION_VER " Last Updated: "\r
+ #define MSG_FREE_MEMORY " Free Memory: "\r
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "\r
+ #define MSG_OK "ok"\r
+ #define MSG_FILE_SAVED "Done saving file."\r
+ #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"\r
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"\r
+ #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"\r
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"\r
+ #define MSG_FILE_PRINTED "Done printing file"\r
+ #define MSG_BEGIN_FILE_LIST "Begin file list"\r
+ #define MSG_END_FILE_LIST "End file list"\r
+ #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "\r
+ #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "\r
+ #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"\r
+ #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "\r
+ #define MSG_HEATING "Heating..."\r
+ #define MSG_HEATING_COMPLETE "Heating done."\r
+ #define MSG_BED_HEATING "Bed Heating."\r
+ #define MSG_BED_DONE "Bed done."\r
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"\r
+ #define MSG_COUNT_X " Count X:"\r
+ #define MSG_ERR_KILLED "Printer halted. kill() called !!"\r
+ #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"\r
+ #define MSG_RESEND "Resend:"\r
+ #define MSG_UNKNOWN_COMMAND "Unknown command:\""\r
+ #define MSG_ACTIVE_EXTRUDER "Active Extruder: "\r
+ #define MSG_INVALID_EXTRUDER "Invalid extruder"\r
+ #define MSG_X_MIN "x_min:"\r
+ #define MSG_X_MAX "x_max:"\r
+ #define MSG_Y_MIN "y_min:"\r
+ #define MSG_Y_MAX "y_max:"\r
+ #define MSG_Z_MIN "z_min:"\r
+ #define MSG_Z_MAX "z_max:"\r
+\r
+ #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"\r
+ #define MSG_SD_INIT_FAIL "SD init fail"\r
+ #define MSG_SD_VOL_INIT_FAIL "volume.init failed"\r
+ #define MSG_SD_OPENROOT_FAIL "openRoot failed"\r
+ #define MSG_SD_CARD_OK "SD card ok"\r
+ #define MSG_SD_WORKDIR_FAIL "workDir open failed"\r
+ #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "\r
+ #define MSG_SD_FILE_OPENED "File opened:"\r
+ #define MSG_SD_SIZE " Size:"\r
+ #define MSG_SD_FILE_SELECTED "File selected"\r
+ #define MSG_SD_WRITE_TO_FILE "Writing to file: "\r
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "\r
+ #define MSG_SD_NOT_PRINTING "Not SD printing"\r
+ #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"\r
+ #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"\r
+\r
+ #define MSG_STEPPER_TO_HIGH "Steprate to high : "\r
+ #define MSG_ENDSTOPS_HIT "endstops hit: "\r
+ #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"\r
+ #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"\r
+\r
+#endif\r
#endif // ifndef LANGUAGE_H\r
~ianmdlvl / marlin.git / blobdiff