+ <varlistentry>
+ <term><option>-Z</option></term>
+ <term><option>--selinux-context=</option></term>
+
+ <listitem><para>Sets the SELinux
+ security context to be used to label
+ processes in the container.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-L</option></term>
+ <term><option>--selinux-apifs-context=</option></term>
+
+ <listitem><para>Sets the SELinux security
+ context to be used to label files in
+ the virtual API file systems in the
+ container.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--capability=</option></term>
+
+ <listitem><para>List one or more
+ additional capabilities to grant the
+ container. Takes a comma-separated
+ list of capability names, see
+ <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for more information. Note that the
+ following capabilities will be granted
+ in any way: CAP_CHOWN,
+ CAP_DAC_OVERRIDE, CAP_DAC_READ_SEARCH,
+ CAP_FOWNER, CAP_FSETID, CAP_IPC_OWNER,
+ CAP_KILL, CAP_LEASE,
+ CAP_LINUX_IMMUTABLE,
+ CAP_NET_BIND_SERVICE,
+ CAP_NET_BROADCAST, CAP_NET_RAW,
+ CAP_SETGID, CAP_SETFCAP, CAP_SETPCAP,
+ CAP_SETUID, CAP_SYS_ADMIN,
+ CAP_SYS_CHROOT, CAP_SYS_NICE,
+ CAP_SYS_PTRACE, CAP_SYS_TTY_CONFIG,
+ CAP_SYS_RESOURCE, CAP_SYS_BOOT,
+ CAP_AUDIT_WRITE,
+ CAP_AUDIT_CONTROL. Also CAP_NET_ADMIN
+ is retained if
+ <option>--private-network</option> is
+ specified. If the special value
+ <literal>all</literal> is passed, all
+ capabilities are
+ retained.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--drop-capability=</option></term>
+
+ <listitem><para>Specify one or more
+ additional capabilities to drop for
+ the container. This allows running the
+ container with fewer capabilities than
+ the default (see above).</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--link-journal=</option></term>
+
+ <listitem><para>Control whether the
+ container's journal shall be made
+ visible to the host system. If enabled,
+ allows viewing the container's journal
+ files from the host (but not vice
+ versa). Takes one of
+ <literal>no</literal>,
+ <literal>host</literal>,
+ <literal>try-host</literal>,
+ <literal>guest</literal>,
+ <literal>try-guest</literal>,
+ <literal>auto</literal>. If
+ <literal>no</literal>, the journal is
+ not linked. If <literal>host</literal>,
+ the journal files are stored on the
+ host file system (beneath
+ <filename>/var/log/journal/<replaceable>machine-id</replaceable></filename>)
+ and the subdirectory is bind-mounted
+ into the container at the same
+ location. If <literal>guest</literal>,
+ the journal files are stored on the
+ guest file system (beneath
+ <filename>/var/log/journal/<replaceable>machine-id</replaceable></filename>)
+ and the subdirectory is symlinked into the host
+ at the same location. <literal>try-host</literal>
+ and <literal>try-guest</literal> do the same
+ but do not fail if the host does not have
+ persistant journalling enabled.
+ If <literal>auto</literal> (the default),
+ and the right subdirectory of
+ <filename>/var/log/journal</filename>
+ exists, it will be bind mounted
+ into the container. If the
+ subdirectory does not exist, no
+ linking is performed. Effectively,
+ booting a container once with
+ <literal>guest</literal> or
+ <literal>host</literal> will link the
+ journal persistently if further on
+ the default of <literal>auto</literal>
+ is used.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-j</option></term>
+
+ <listitem><para>Equivalent to
+ <option>--link-journal=try-guest</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--read-only</option></term>
+
+ <listitem><para>Mount the root file
+ system read-only for the
+ container.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--bind=</option></term>
+ <term><option>--bind-ro=</option></term>
+
+ <listitem><para>Bind mount a file or
+ directory from the host into the
+ container. Either takes a path
+ argument -- in which case the
+ specified path will be mounted from
+ the host to the same path in the
+ container --, or a colon-separated
+ pair of paths -- in which case the
+ first specified path is the source in
+ the host, and the second path is the
+ destination in the container. The
+ <option>--bind-ro=</option> option
+ creates read-only bind
+ mounts.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--tmpfs=</option></term>
+
+ <listitem><para>Mount a tmpfs file
+ system into the container. Takes a
+ single absolute path argument that
+ specifies where to mount the tmpfs
+ instance to (in which case the
+ directory access mode will be chosen
+ as 0755, owned by root/root), or
+ optionally a colon-separated pair of
+ path and mount option string, that is
+ used for mounting (in which case the
+ kernel default for access mode and
+ owner will be chosen, unless otherwise
+ specified). This option is
+ particularly useful for mounting
+ directories such as
+ <filename>/var</filename> as tmpfs, to
+ allow state-less systems, in
+ particular when combined with
+ <option>--read-only</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--setenv=</option></term>
+
+ <listitem><para>Specifies an
+ environment variable assignment to
+ pass to the init process in the
+ container, in the format
+ <literal>NAME=VALUE</literal>. This
+ may be used to override the default
+ variables or to set additional
+ variables. This parameter may be used
+ more than once.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--share-system</option></term>
+
+ <listitem><para>Allows the container
+ to share certain system facilities
+ with the host. More specifically, this
+ turns off PID namespacing, UTS
+ namespacing and IPC namespacing, and
+ thus allows the guest to see and
+ interact more easily with processes
+ outside of the container. Note that
+ using this option makes it impossible
+ to start up a full Operating System in
+ the container, as an init system
+ cannot operate in this mode. It is
+ only useful to run specific programs
+ or applications this way, without
+ involving an init system in the
+ container. This option implies
+ <option>--register=no</option>. This
+ option may not be combined with
+ <option>--boot</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--register=</option></term>
+
+ <listitem><para>Controls whether the
+ container is registered with
+ <citerefentry><refentrytitle>systemd-machined</refentrytitle><manvolnum>8</manvolnum></citerefentry>. Takes
+ a boolean argument, defaults to
+ <literal>yes</literal>. This option
+ should be enabled when the container
+ runs a full Operating System (more
+ specifically: an init system), and is
+ useful to ensure that the container is
+ accessible via
+ <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ and shown by tools such as
+ <citerefentry project='man-pages'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry>. If
+ the container does not run an init
+ system, it is recommended to set this
+ option to <literal>no</literal>. Note
+ that <option>--share-system</option>
+ implies
+ <option>--register=no</option>.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--keep-unit</option></term>
+
+ <listitem><para>Instead of creating a
+ transient scope unit to run the
+ container in, simply register the
+ service or scope unit
+ <command>systemd-nspawn</command> has
+ been invoked in with
+ <citerefentry><refentrytitle>systemd-machined</refentrytitle><manvolnum>8</manvolnum></citerefentry>. This
+ has no effect if
+ <option>--register=no</option> is
+ used. This switch should be used if
+ <command>systemd-nspawn</command> is
+ invoked from within a service unit,
+ and the service unit's sole purpose
+ is to run a single
+ <command>systemd-nspawn</command>
+ container. This option is not
+ available if run from a user
+ session.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--personality=</option></term>
+
+ <listitem><para>Control the
+ architecture ("personality") reported
+ by
+ <citerefentry><refentrytitle>uname</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ in the container. Currently, only
+ <literal>x86</literal> and
+ <literal>x86-64</literal> are
+ supported. This is useful when running
+ a 32-bit container on a 64-bit
+ host. If this setting is not used,
+ the personality reported in the
+ container is the same as the one
+ reported on the
+ host.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-q</option></term>
+ <term><option>--quiet</option></term>
+
+ <listitem><para>Turns off any status
+ output by the tool itself. When this
+ switch is used, the only output
+ from nspawn will be the console output
+ of the container OS itself.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--volatile</option><replaceable>=MODE</replaceable></term>
+
+ <listitem><para>Boots the container in
+ volatile (ephemeral) mode. When no
+ mode parameter is passed or when mode
+ is specified as <literal>yes</literal>
+ full volatile mode is enabled. This
+ means the root directory is mounted as
+ mostly unpopulated
+ <literal>tmpfs</literal> instance, and
+ <filename>/usr</filename> from the OS
+ tree is mounted into it, read-only
+ (the system thus starts up with
+ read-only OS resources, but pristine
+ state and configuration, any changes
+ to the either are lost on
+ shutdown). When the mode parameter is
+ specified as <literal>state</literal>
+ the OS tree is mounted read-only, but
+ <filename>/var</filename> is mounted
+ as <literal>tmpfs</literal> instance
+ into it (the system thus starts up
+ with read-only OS resources and
+ configuration, but pristine state, any
+ changes to the latter are lost on
+ shutdown). When the mode parameter is
+ specified as <literal>no</literal>
+ (the default) the whole OS tree is made
+ available writable.</para>
+
+ <para>Note that setting this to
+ <literal>yes</literal> or
+ <literal>state</literal> will only
+ work correctly with operating systems
+ in the container that can boot up with
+ only <filename>/usr</filename>
+ mounted, and are able to populate
+ <filename>/var</filename>
+ automatically, as
+ needed.</para></listitem>
+ </varlistentry>
+
+ <xi:include href="standard-options.xml" xpointer="help" />
+ <xi:include href="standard-options.xml" xpointer="version" />