+ }
+ translate([0, overclipcupgap, 0])
+ rotate([0,0, 102 + fdia])
+ FilamentTeeth(fdia=fdia, h=teethh);
+}
+
+module CupSecuringClipSolid(w,d,h1,h2){
+ rotate([0,-90,0]) translate([0,-h1/2,-w/2]) linear_extrude(height=w) {
+ polygon(points=[[0,0], [d,0], [d,h2], [0,h1]]);
+ }
+}
+
+module CupSecuringClipSolidSmooth(xrad=0, xdepth=0){
+ hbase = totalheight + prongstalkxwidth - overcliproundr*2;
+ minkowski(){
+ CupSecuringClipSolid(w=totalwidth,
+ d=overclipdepth + xdepth,
+ h1=hbase - overclipsmaller,
+ h2=hbase + overclipbigger);
+ cylinder($fn=20, h=0.01, r=overcliproundr+xrad);
+ }
+}
+
+module CupSecuringClip(){ ////toplevel
+ wingswidth = wingspoke*2 + overclipthick*2 + overcliproundr*2 + totalwidth;
+ difference(){
+ union(){
+ CupSecuringClipSolidSmooth(xrad=overclipthick, xdepth=0);
+ translate([-wingswidth/2, -wingsize/2, 0])
+ cube([wingswidth, wingsize, wingthick]);
+ }
+ translate([0,0,-0.1])
+ CupSecuringClipSolidSmooth(xrad=0, xdepth=0.2);
+ }
+}
+
+module ArmDoveClipPin(){ ////toplevel
+ DoveClipPin(h=doveclipheight);
+}
+
+module Hub(){ ////toplevel
+ difference(){
+ cylinder($fn=60, h=hublthick, r=hubbigrad);
+ translate([0,0,-1])
+ cylinder($fn=30, h=hublthick+2, r=(hubbigrad-hublwidth));
+ }
+ axlerad = hubaxlerad + slop;
+ difference(){
+ cylinder(h=hubaxlelen, r=axlerad+hublwidth);
+ translate([0,0,-1]) cylinder($fn=60, h=hubaxlelen+2, r=axlerad);
+ }
+ hole = hubeffrad - hubbigrad - DoveClip_depth() - hublwidth*2;
+ holewidth = DoveClipPairSane_width() - hubstemwidth*2;
+ for (ang=[0,120,240])
+ rotate([0,0,ang]) {
+ difference() {
+ translate([hubeffrad,0,0])
+ DoveClipPairSane(h=doveclipheight,
+ baseextend = (hubeffrad - DoveClip_depth()
+ - hubbigrad + hublwidth));
+ if (hole>hublwidth && holewidth > 2) {
+ translate([hubbigrad + hublwidth, -holewidth/2, -1])
+ cube([hole, holewidth, hublthick+2]);
+ }
+ }
+ }
+ xmin = axlerad+hublwidth/2;
+ xmax = hubbigrad-hublwidth/2;
+ for (ang = [0 : 60 : 359])
+ rotate([0,0,ang]) rotate([90,0,0]) {
+ translate([0,0,-hublwidth/2])
+ linear_extrude(height=hublwidth)
+ polygon([[xmin,0.05], [xmax,0.05],
+ [xmax,hublthick-0.2], [xmin, hubaxlelen-0.2]]);
+ }
+}
+
+module ArmExtender(){ ////toplevel
+ DoveClipExtender(length=exteffrad-hubeffrad,
+ ha=doveclipheight,
+ hb=doveclipheight);
+}
+
+module Axle(){ ////toplevel
+ pillarswidth = DoveClipPairSane_width(towerclipcount);
+
+ translate([-axlehorizoffset, -axlevertheight, 0]) {
+ rotate([0,0,-90])
+ DoveClipPairSane(h=towercliph, count=towerclipcount, baseextend=3);
+ translate([0, DoveClip_depth(), 0])
+ rotate([0,0,90])
+ ExtenderPillars(axlevertheight - DoveClip_depth(),
+ pillarswidth, towercliph,
+ pillarw=towerpillarw);
+ }