chiark / gitweb /
udev-builtin-keyboard: do tell on which device EVIOCSKEYCODE failed.
[elogind.git] / NEWS
diff --git a/NEWS b/NEWS
index f90d7f840c5f58645a7fc0efec93e3cd740592da..484f84d07c8e76e92600598e7b745230d2af313c 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -1,5 +1,137 @@
 systemd System and Service Manager
 
 systemd System and Service Manager
 
+CHANGES WITH 213:
+
+        * A new "systemd-timesyncd" daemon has been added for
+          synchronizing the system clock across the network. It
+          implements an SNTP client. In contrast to NTP
+          implementations such as chrony or the NTP reference server
+          this only implements a client side, and does not bother with
+          the full NTP complexity, focusing only on querying time from
+          one remote server and synchronizing the local clock to
+          it. Unless you intend to serve NTP to networked clients or
+          want to connect to local hardware clocks this simple NTP
+          client should be more than appropriate for most
+          installations. The daemon runs with minimal privileges, and
+          has been hooked up with networkd to only operate when
+          network connectivity is available. The daemon saves the
+          current clock to disk every time a new NTP sync has been
+          acquired, and uses this to possibly correct the system clock
+          early at bootup, in order to accommodate for systems that
+          lack an RTC such as the Raspberry Pi and embedded devices,
+          and make sure that time monotonically progresses on these
+          systems, even if it is not always correct. To make use of
+          this daemon a new system user and group "systemd-timesync"
+          needs to be created on installation of systemd.
+
+        * The queue "seqnum" interface of libudev has been disabled, as
+          it was generally incompatible with device namespacing as
+          sequence numbers of devices go "missing" if the devices are
+          part of a different namespace.
+
+        * "systemctl list-timers" and "systemctl list-sockets" gained
+          a --recursive switch for showing units of these types also
+          for all local containers, similar in style to the already
+          supported --recursive switch for "systemctl list-units".
+
+        * A new RebootArgument= setting has been added for service
+          units, which may be used to specify a kernel reboot argument
+          to use when triggering reboots with StartLimitAction=.
+
+        * A new FailureAction= setting has been added for service
+          units which may be used to specify an operation to trigger
+          when a service fails. This works similarly to
+          StartLimitAction=, but unlike it controls what is done
+          immediately rather than only after several attempts to
+          restart the service in question.
+
+        * hostnamed got updated to also expose the kernel name,
+          release, and version on the bus. This is useful for
+          executing commands like hostnamectl with the -H switch.
+          systemd-analyze makes use of this to properly display
+          details when running non-locally.
+
+        * The bootchart tool can now show cgroup information in the
+          graphs it generates.
+
+        * The CFS CPU quota cgroup attribute is now exposed for
+          services. The new CPUQuota= switch has been added for this
+          which takes a percentage value. Setting this will have the
+          result that a service may never get more CPU time than the
+          specified percentage, even if the machine is otherwise idle.
+
+        * systemd-networkd learned IPIP and SIT tunnel support.
+
+        * LSB init scripts exposing a dependency on $network will now
+          get a dependency on network-online.target rather than simply
+          network.target. This should bring LSB handling closer to
+          what it was on SysV systems.
+
+        * A new fsck.repair= kernel option has been added to control
+          how fsck shall deal with unclean file systems at boot.
+
+        * The (.ini) configuration file parser will now silently
+          ignore sections whose name begins with "X-". This may be
+          used to maintain application-specific extension sections in unit
+          files.
+
+        * machined gained a new API to query the IP addresses of
+          registered containers. "machinectl status" has been updated
+          to show these addresses in its output.
+
+        * A new call sd_uid_get_display() has been added to the
+          sd-login APIs for querying the "primary" session of a
+          user. The "primary" session of the user is elected from the
+          user's sessions and generally a graphical session is
+          preferred over a text one.
+
+        * A minimal systemd-resolved daemon has been added. It
+          currently simply acts as a companion to systemd-networkd and
+          manages resolv.conf based on per-interface DNS
+          configuration, possibly supplied via DHCP. In the long run
+          we hope to extend this into a local DNSSEC enabled DNS and
+          mDNS cache.
+
+        * The systemd-networkd-wait-online tool is now enabled by
+          default. It will delay network-online.target until a network
+          connection has been configured. The tool primarily integrates
+          with networkd, but will also make a best effort to make sense
+          of network configuration performed in some other way.
+
+        * Two new service options StartupCPUShares= and
+          StartupBlockIOWeight= have been added that work similarly to
+          CPUShares= and BlockIOWeight= however only apply during
+          system startup. This is useful to prioritize certain services
+          differently during bootup than during normal runtime.
+
+        * hostnamed has been changed to prefer the statically
+          configured hostname in /etc/hostname (unless set to
+          'localhost' or empty) over any dynamic one supplied by
+          dhcp. With this change the rules for picking the hostname
+          match more closely the rules of other configuration settings
+          where the local administrator's configuration in /etc always
+          overrides any other settings.
+
+        Contributions fron: Ali H. Caliskan, Alison Chaiken, Bas van
+        den Berg, Brandon Philips, Cristian Rodríguez, Daniel Buch,
+        Dan Kilman, Dave Reisner, David Härdeman, David Herrmann,
+        David Strauss, Dimitris Spingos, Djalal Harouni, Eelco
+        Dolstra, Evan Nemerson, Florian Albrechtskirchinger, Greg
+        Kroah-Hartman, Harald Hoyer, Holger Hans Peter Freyther, Jan
+        Engelhardt, Jani Nikula, Jason St. John, Jeffrey Clark,
+        Jonathan Boulle, Kay Sievers, Lennart Poettering, Lukas
+        Nykryn, Lukasz Skalski, Łukasz Stelmach, Mantas Mikulėnas,
+        Marcel Holtmann, Martin Pitt, Matthew Monaco, Michael
+        Marineau, Michael Olbrich, Michal Sekletar, Mike Gilbert, Nis
+        Martensen, Patrik Flykt, Philip Lorenz, poma, Ray Strode,
+        Reyad Attiyat, Robert Milasan, Scott Thrasher, Stef Walter,
+        Steven Siloti, Susant Sahani, Tanu Kaskinen, Thomas Bächler,
+        Thomas Hindoe Paaboel Andersen, Tom Gundersen, Umut Tezduyar
+        Lindskog, WaLyong Cho, Will Woods, Zbigniew
+        Jędrzejewski-Szmek
+
+        -- Beijing, 2014-05-28
+
 CHANGES WITH 212:
 
         * When restoring the screen brightness at boot, stay away from
 CHANGES WITH 212:
 
         * When restoring the screen brightness at boot, stay away from
@@ -16,7 +148,7 @@ CHANGES WITH 212:
         * sd-login gained new calls
           sd_peer_get_{session,owner_uid,unit,user_unit,slice,machine_name}(),
           to query the identity of the peer of a local AF_UNIX
         * sd-login gained new calls
           sd_peer_get_{session,owner_uid,unit,user_unit,slice,machine_name}(),
           to query the identity of the peer of a local AF_UNIX
-          connection. They operate similar to their sd_pid_get_xyz()
+          connection. They operate similarly to their sd_pid_get_xyz()
           counterparts.
 
         * PID 1 will now maintain a system-wide system state engine
           counterparts.
 
         * PID 1 will now maintain a system-wide system state engine
@@ -166,7 +298,7 @@ CHANGES WITH 211:
           directory's lifetime is bound to the daemon runtime and that
           the daemon starts up with an empty directory each time. This
           is particularly useful when writing services that drop
           directory's lifetime is bound to the daemon runtime and that
           the daemon starts up with an empty directory each time. This
           is particularly useful when writing services that drop
-          priviliges using the User= or Group= setting.
+          privileges using the User= or Group= setting.
 
         * The DeviceAllow= unit setting now supports globbing for
           matching against device group names.
 
         * The DeviceAllow= unit setting now supports globbing for
           matching against device group names.
@@ -199,7 +331,7 @@ CHANGES WITH 211:
 
         * systemd-nspawn gained a new --network-macvlan= setting to
           set up a private macvlan interface for the
 
         * systemd-nspawn gained a new --network-macvlan= setting to
           set up a private macvlan interface for the
-          container. Similar, systemd-networkd gained a new
+          container. Similarly, systemd-networkd gained a new
           Kind=macvlan setting in .netdev files.
 
         * systemd-networkd now supports configuring local addresses
           Kind=macvlan setting in .netdev files.
 
         * systemd-networkd now supports configuring local addresses
@@ -1213,7 +1345,7 @@ CHANGES WITH 205:
           not available as public API.
 
         * systemd will now look for the "debug" argument on the kernel
           not available as public API.
 
         * systemd will now look for the "debug" argument on the kernel
-          command line and enable debug logging, similar to
+          command line and enable debug logging, similar to what
           "systemd.log_level=debug" already did before.
 
         * "systemctl set-default", "systemctl get-default" has been
           "systemd.log_level=debug" already did before.
 
         * "systemctl set-default", "systemctl get-default" has been
@@ -1652,7 +1784,7 @@ CHANGES WITH 198:
 
         * The various "environment" files, such as /etc/locale.conf
           now support continuation lines with a backslash ("\") as
 
         * The various "environment" files, such as /etc/locale.conf
           now support continuation lines with a backslash ("\") as
-          last character in the line, similar in style (but different)
+          last character in the line, similarly in style (but different)
           to how this is supported in shells.
 
         * For normal user processes the _SYSTEMD_USER_UNIT= field is
           to how this is supported in shells.
 
         * For normal user processes the _SYSTEMD_USER_UNIT= field is
@@ -1699,7 +1831,7 @@ CHANGES WITH 198:
 
         * "systemctl unlock-sessions" has been added, that allows
           unlocking the screens of all user sessions at once, similar
 
         * "systemctl unlock-sessions" has been added, that allows
           unlocking the screens of all user sessions at once, similar
-          how "systemctl lock-sessions" already locked all users
+          to how "systemctl lock-sessions" already locked all users
           sessions. This is backed by a new D-Bus call UnlockSessions().
 
         * "loginctl seat-status" will now show the master device of a
           sessions. This is backed by a new D-Bus call UnlockSessions().
 
         * "loginctl seat-status" will now show the master device of a
@@ -1779,7 +1911,7 @@ CHANGES WITH 198:
           pager. This is only supported in conjunction with "less".
 
         * journalctl gained a new "--user-unit=" option, that works
           pager. This is only supported in conjunction with "less".
 
         * journalctl gained a new "--user-unit=" option, that works
-          similar to "--unit=" but filters for user units rather than
+          similarly to "--unit=" but filters for user units rather than
           system units.
 
         * A number of unit files to ease adoption of systemd in
           system units.
 
         * A number of unit files to ease adoption of systemd in