# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
-# Set the following to `true' to make a debuggable build.
+# Set the following to control the use of syslog
+# Set it to `false' to remove all logging
+USE_LOG = true
+
+# Set the following to `true' to log the debug
+# and make a unstripped, unoptimized binary.
# Leave this set to `false' for production use.
DEBUG = false
# Set the following to `true' to make udev emit a D-BUS signal when a
# new node is created.
-DBUS = false
+USE_DBUS = false
ROOT = udev
-VERSION = 008_bk
+DAEMON = udevd
+SENDER = udevsend
+VERSION = 014_bk
INSTALL_DIR = /usr/local/bin
RELEASE_NAME = $(ROOT)-$(VERSION)
+LOCAL_CFG_DIR = etc/udev
DESTDIR =
# override this to make udev look in a different location for it's config files
hotplugdir = ${etcdir}/hotplug.d/default
dbusdir = ${etcdir}/dbus-1/system.d
configdir = ${etcdir}/udev/
+initdir = ${etcdir}/init.d/
srcdir = .
INSTALL = /usr/bin/install -c
# Comment out this line to build with something other
# than the local version of klibc
-#KLIBC = true
+#USE_KLIBC = true
# If you are running a cross compiler, you may want to set this
-# to something more interesting, like "arm-linux-". I you want
+# to something more interesting, like "arm-linux-". If you want
# to compile vs uClibc, that can be done here as well.
CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc-
CC = $(CROSS)gcc
CFLAGS+=-pipe
endif
+ifeq ($(strip $(USE_LOG)),true)
+ CFLAGS += -DLOG
+endif
+
# if DEBUG is enabled, then we do not strip or optimize
ifeq ($(strip $(DEBUG)),true)
CFLAGS += $(WARNINGS) -O1 -g -DDEBUG -D_GNU_SOURCE
STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment
endif
-# If we are using our version of klibc, then we need to build and link it.
-# Otherwise, use glibc and link statically.
-ifeq ($(strip $(KLIBC)),true)
+# If we are using our version of klibc, then we need to build, link it, and then
+# link udev against it statically.
+# Otherwise, use glibc and link dynamically.
+ifeq ($(strip $(USE_KLIBC)),true)
KLIBC_BASE = $(PWD)/klibc
KLIBC_DIR = $(KLIBC_BASE)/klibc
INCLUDE_DIR := $(KLIBC_DIR)/include
LIBC = $(ARCH_LIB_OBJS) $(LIB_OBJS) $(CRT0)
CFLAGS += -nostdinc -I$(INCLUDE_DIR) -I$(KLIBC_DIR)/arch/$(ARCH)/include \
-I$(INCLUDE_DIR)/bits$(BITSIZE) -I$(GCCINCDIR) -I$(LINUX_INCLUDE_DIR) \
- -D__KLIBC__
+ -D__KLIBC__ -fno-builtin-printf
LIB_OBJS =
LDFLAGS = --static --nostdlib -nostartfiles -nodefaultlibs
else
LIBC =
CFLAGS += -I$(GCCINCDIR)
LIB_OBJS = -lc
- LDFLAGS = --static
+ LDFLAGS =
endif
CFLAGS += -I$(PWD)/libsysfs
-all: $(ROOT)
- @for target in $(EXTRAS) ; do \
+all: $(ROOT) $(DAEMON) $(SENDER)
+ @extras="$(EXTRAS)" ; for target in $$extras ; do \
echo $$target ; \
$(MAKE) prefix=$(prefix) LD="$(LD)" SYSFS="$(SYSFS)" \
-C $$target $@ ; \
$(SYSFS) \
$(TDB)
-ifeq ($(strip $(KLIBC)),true)
+ifeq ($(strip $(USE_KLIBC)),true)
OBJS += klibc_fixups.o
endif
-ifeq ($(DBUS), true)
+ifeq ($(USE_DBUS), true)
CFLAGS += -DUSE_DBUS
CFLAGS += $(shell pkg-config --cflags dbus-1)
LDFLAGS += $(shell pkg-config --libs dbus-1)
@echo \#define UDEV_PERMISSION_FILE \"$(configdir)\udev.permissions\" >> $@
# config files automatically generated
-GEN_CONFIGS = udev.conf
+GEN_CONFIGS = $(LOCAL_CFG_DIR)/udev.conf
# Rules on how to create the generated config files
-udev.conf:
- sed -e "s-@udevdir@-$(udevdir)-" < udev.conf.in > $@
+$(LOCAL_CFG_DIR)/udev.conf:
+ sed -e "s:@udevdir@:$(udevdir):" < $(LOCAL_CFG_DIR)/udev.conf.in > $@
$(OBJS): $(GEN_HEADERS)
-$(ROOT): $(OBJS)
+$(ROOT): $(OBJS) udev.h namedev.h udev_version.h udev_dbus.h udevdb.h klibc_fixups.h logging.h list.h
$(LD) $(LDFLAGS) -o $(ROOT) $(CRT0) $(OBJS) $(LIB_OBJS) $(ARCH_LIB_OBJS)
$(STRIPCMD) $(ROOT)
+$(DAEMON): $(ROOT) udevd.h udevd.o
+ $(LD) $(LDFLAGS) -o $(DAEMON) $(CRT0) udevd.o logging.o $(LIB_OBJS) $(ARCH_LIB_OBJS)
+ $(STRIPCMD) $(ROOT)
+
+$(SENDER): $(ROOT) udevd.h udevsend.o
+ $(LD) $(LDFLAGS) -o $(SENDER) $(CRT0) udevsend.o logging.o $(LIB_OBJS) $(ARCH_LIB_OBJS)
+ $(STRIPCMD) $(ROOT)
+
clean:
-find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
| xargs rm -f
- -rm -f core $(ROOT) $(GEN_HEADERS) $(GEN_CONFIGS)
+ -rm -f core $(ROOT) $(GEN_HEADERS) $(GEN_CONFIGS) $(DAEMON) $(SENDER)
$(MAKE) -C klibc clean
- @for target in $(EXTRAS) ; do \
+ @extras="$(EXTRAS)" ; for target in $$extras ; do \
echo $$target ; \
$(MAKE) prefix=$(prefix) LD="$(LD)" SYSFS="$(SYSFS)" \
-C $$target $@ ; \
done ; \
-DISTFILES = $(shell find . \( -not -name '.' \) -print | grep -v CVS | grep -v "\.tar\.gz" | grep -v "\/\." | grep -v releases | grep -v BitKeeper | grep -v SCCS | grep -v "\.tdb" | grep -v "test\/sys" | sort )
+DISTFILES = $(shell find . \( -not -name '.' \) -print | grep -v -e CVS -e "\.tar\.gz$" -e "\/\." -e releases -e BitKeeper -e SCCS -e "\.tdb$" -e test/sys | sort )
DISTDIR := $(RELEASE_NAME)
srcdir = .
release: clean
@echo "Built $(RELEASE_NAME).tar.gz"
-ifeq ($(DBUS), true)
+ifeq ($(USE_DBUS), true)
install-dbus-policy:
$(INSTALL) -d $(DESTDIR)$(dbusdir)
- $(INSTALL_DATA) udev_sysbus_policy.conf $(DESTDIR)$(dbusdir)
+ $(INSTALL_DATA) etc/dbus-1/system.d/udev_sysbus_policy.conf $(DESTDIR)$(dbusdir)
+
uninstall-dbus-policy:
- rm $(DESTDIR)$(dbusdir)/udev_sysbus_policy.conf
else
-
endif
-install: install-dbus-policy all $(GEN_CONFIGS)
- $(INSTALL) -d $(DESTDIR)$(udevdir)
+install-config: $(GEN_CONFIGS)
$(INSTALL) -d $(DESTDIR)$(configdir)
+ @if [ ! -r $(DESTDIR)$(configdir)udev.conf ]; then \
+ echo $(INSTALL_DATA) $(LOCAL_CFG_DIR)/udev.conf $(DESTDIR)$(configdir); \
+ $(INSTALL_DATA) $(LOCAL_CFG_DIR)/udev.conf $(DESTDIR)$(configdir); \
+ fi
+ @if [ ! -r $(DESTDIR)$(configdir)udev.rules ]; then \
+ echo $(INSTALL_DATA) $(LOCAL_CFG_DIR)/udev.rules $(DESTDIR)$(configdir); \
+ $(INSTALL_DATA) $(LOCAL_CFG_DIR)/udev.rules $(DESTDIR)$(configdir); \
+ fi
+ @if [ ! -r $(DESTDIR)$(configdir)udev.permissions ]; then \
+ echo $(INSTALL_DATA) $(LOCAL_CFG_DIR)/udev.permissions $(DESTDIR)$(configdir); \
+ $(INSTALL_DATA) $(LOCAL_CFG_DIR)/udev.permissions $(DESTDIR)$(configdir); \
+ fi
+
+install: install-config install-dbus-policy all
+ $(INSTALL) -d $(DESTDIR)$(udevdir)
$(INSTALL) -d $(DESTDIR)$(hotplugdir)
$(INSTALL_PROGRAM) -D $(ROOT) $(DESTDIR)$(sbindir)/$(ROOT)
+ @if [ "x$(USE_LSB)" = "xtrue" ]; then \
+ $(INSTALL_PROGRAM) -D etc/init.d/udev.init.LSB $(DESTDIR)$(initdir)/udev; \
+ ln -s $(DESTDIR)$(initdir)/udev $(sbin_dir)/rcudev; \
+ else \
+ $(INSTALL_PROGRAM) -D etc/init.d/udev $(DESTDIR)$(initdir)/udev; \
+ fi
$(INSTALL_DATA) -D udev.8 $(DESTDIR)$(mandir)/man8/udev.8
- $(INSTALL_DATA) udev.conf $(DESTDIR)$(configdir)
- $(INSTALL_DATA) udev.rules $(DESTDIR)$(configdir)
- $(INSTALL_DATA) udev.permissions $(DESTDIR)$(configdir)
- rm -f $(DESTDIR)$(hotplugdir)/udev.hotplug
- - ln -s $(sbindir)/$(ROOT) $(DESTDIR)$(hotplugdir)/udev.hotplug
- @for target in $(EXTRAS) ; do \
+ - ln -f -s $(sbindir)/$(ROOT) $(DESTDIR)$(hotplugdir)/udev.hotplug
+ @extras="$(EXTRAS)" ; for target in $$extras ; do \
echo $$target ; \
$(MAKE) prefix=$(prefix) LD="$(LD)" SYSFS="$(SYSFS)" \
-C $$target $@ ; \
- rm $(configdir)/udev.permissions
- rm $(configdir)/udev.rules
- rm $(configdir)/udev.conf
+ - rm $(initdir)/udev
- rm $(mandir)/man8/udev.8
- rm $(sbindir)/$(ROOT)
- rmdir $(hotplugdir)
- rmdir $(configdir)
- rmdir $(udevdir)
- @for target in $(EXTRAS) ; do \
+ @extras="$(EXTRAS)" ; for target in $$extras ; do \
echo $$target ; \
$(MAKE) prefix=$(prefix) LD="$(LD)" SYSFS="$(SYSFS)" \
-C $$target $@ ; \
done ; \
-
-