5 body_depth = 40.15 + 4;
6 body_height = 16.78 + 0.50;
8 back_round_depth = 2.0;
10 back_above_height = 5.3;
13 conn_thick = 6.42 + 2.25;
14 wire_thick = 6.00 + 0.75;
15 total_depth = 63.82 - 1.0;
17 body_front_overlap = 3;
30 epp0 = [ 0, -body_height/2 ];
31 epp1 = [ 0, -conn_thick/2 ];
32 epp2 = epp1 + [ -body_front_overlap, 0 ];
33 epp3 = [ +body_depth -total_depth, epp2[1] ];
34 epp4 = [ epp3[0], +conn_thick/2 +prong_higher ];
35 epp4a = epp4 + prong_higher * [0,-1];
36 epp4b = epp4 + prong_higher * [1,0];
37 epp5 = epp4 + [ -prong_depth, 0 ];
38 epp6 = [ epp5[0], epp0[1] -base_thick ];
39 epp7 = [ epp2[0], epp6[1] ];
40 epp12 = [ +body_depth +back_round_rad, 0 ];
41 epp11 = [ +body_depth +back_round_depth, epp0[1] ];
42 epp10 = [ epp11[0], +back_above_height ];
43 epp9 = epp10 + [ +back_thick, 0 ];
44 epp8 = [ epp9[0], epp7[1] ];
47 y2 = y1 + prong_width;
49 module MainElevation(){
63 translate(epp12) circle(r= back_round_rad);
65 epp10 + [-back_round_rad, 0]);
71 linextr_y_xz( -y2, +y2 ) {
74 linextr_y_xz( -y1, +y1 ) {
75 rectfromto( epp7 + [+1, -1],
81 module RetainerPrint(){
82 rotate([0,0,180]) Retainer();