1 #compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent
5 local curcontext="$curcontext" state lstate line
8 # -s for aggregated options like -aP
10 {-h,--help}'[Show help]' \
11 '--version[Show package version]' \
12 {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
13 \*{-p,--property=}'[Show only properties by specific name]:unit property' \
14 {-a,--all}'[Show all units/properties, including dead/empty ones]' \
15 '--failed[Show only failed units]' \
16 "--full[Don't ellipsize unit names on output]" \
17 '--fail[When queueing a new job, fail if conflicting jobs are pending]' \
18 '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
19 '--kill-who=[Who to send signal to]:killwho:(main control all)' \
20 {-s,--signal=}'[Which signal to send]:signal:_signals' \
21 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
22 {-P,--privileged}'[Acquire privileges before execution]' \
23 {-q,--quiet}'[Suppress output]' \
24 '--no-block[Do not wait until operation finished]' \
25 "--no-wall[Don't send wall message before halt/power-off/reboot]" \
26 "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
27 '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
28 '--no-pager[Do not pipe output into a pager]' \
29 '--no-ask-password[Do not ask for system passwords]' \
30 '--system[Connect to system manager]' \
31 '--user[Connect to user service manager]' \
32 '--global[Enable/disable unit files globally]' \
33 {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
34 '--root=[Enable unit files in the specified root directory]:directory:_directories' \
35 '--runtime[Enable unit files only temporarily until next reboot]' \
36 {-n,--lines=}'[Journal entries to show]:number of entries' \
37 {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \
38 '*::systemctl command:_systemctl_command'
42 {-h,--help}'[Show help]' \
43 '--version[Show package version]' \
44 \*{-p,--property=}'[Show only properties by this name]:unit property' \
45 {-a,--all}'[Show all properties, including empty ones]' \
46 '--kill-who=[Who to send signal to]:killwho:(main control all)' \
47 {-s,--signal=}'[Which signal to send]:signal:_signals' \
48 '--no-ask-password[Do not ask for system passwords]' \
49 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
50 {-P,--privileged}'[Acquire privileges before execution]' \
51 '--no-pager[Do not pipe output into a pager]' \
52 '*::loginctl command:_loginctl_command'
57 {-h,--help}'[Show this help]' \
58 '--version[Show package version]' \
59 '--transient[Only set transient hostname]' \
60 '--static[Only set static hostname]' \
61 '--pretty[Only set pretty hostname]' \
62 '--no-ask-password[Do not prompt for password]' \
63 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
64 '*::hostnamectl commands:_hostnamectl_command'
68 '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
69 '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
70 {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
71 {-b,--this-boot}'[Show data only from current boot]' \
72 {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
73 '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \
74 {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
75 {-f,--follow}'[Follow journal]' \
76 {-n,--lines=}'[Number of journal entries to show]:integer' \
77 '--no-tail[Show all lines, even in follow mode]' \
78 {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
79 '--full[Show long fields in full]' \
80 {-a,--all}'[Show all fields, including long and unprintable]' \
81 {-q,--quiet}"[Don't show privilege warning]" \
82 '--no-pager[Do not pipe output into a pager]' \
83 {-m,--merge}'[Show entries from all available journals]' \
84 {-D,--directory=}'[Show journal files from directory]:directories:_directories' \
85 '--interval=[Time interval for changing the FSS sealing key]:time interval' \
86 '--verify-key=[Specify FSS verification key]:FSS key' \
87 {-h,--help}'[Show this help]' \
88 '--version[Show package version]' \
89 '--new-id128[Generate a new 128 Bit ID]' \
90 '--header[Show journal header information]' \
91 '--disk-usage[Show total disk usage]' \
92 {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
93 '--setup-keys[Generate new FSS key pair]' \
94 '--verify[Verify journal file consistency]' \
95 '--list-catalog[List messages in catalog]' \
96 '--update-catalog[Update binary catalog database]' \
97 '*::default: _journal_none'
101 {-h,--help}'[Show this help]' \
102 '--version[Show package version]' \
103 "--no-convert[Don't convert keyboard mappings]" \
104 '--no-pager[Do not pipe output into a pager]' \
105 '--no-ask-password[Do not prompt for password]' \
106 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
107 '*::localectl commands:_localectl_command'
111 {-o,--output=}'[Write output to FILE]:output file:_files' \
112 '--no-pager[Do not pipe output into a pager]' \
113 {-h,--help}'[Show this help]' \
114 '--version[Show package version]' \
115 '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
120 {-h,--help}'[Show this help]' \
121 '--version[Show package version]' \
122 '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
123 '--no-pager[Do not pipe output into a pager]' \
124 '--no-ask-password[Do not prompt for password]' \
125 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
126 '*::timedatectl commands:_timedatectl_command'
130 '--debug[Print debug messages to stderr]' \
131 '--version[Print version number]' \
132 '--help[Print help text]' \
133 '*::udevadm commands:_udevadm_command'
137 {-h,--help}'[Show help text.]' \
138 '--user[Shows performance data of user sessions instead of the system manager.]' \
139 '--order[When generating graph for dot, show only order]' \
140 '--require[When generating graph for dot, show only requirement]' \
141 '*::systemd-analyze commands:_systemd_analyze_command'
143 systemd-ask-password)
145 {-h,--help}'[Show this help]' \
146 '--icon=[Icon name]' \
147 '--timeout=[Timeout in sec]' \
148 '--no-tty[Ask question via agent even on TTY]' \
149 '--accept-cached[Accept cached passwords]' \
150 '--multiple[List multiple passwords if available]'
154 {-h,--help}'[Show this help]' \
155 '--version[Show package version.]' \
156 {-t,--identifier=}'[Set syslog identifier.]' \
157 {-p,--priority=}'[Set priority value.]:value:({0..7})' \
158 '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
163 {-h,--help}'[Show this help]' \
164 '--version[Show package version]' \
165 '--no-pager[Do not pipe output into a pager]' \
166 {-a,--all}'[Show all groups, including empty]' \
167 '-k[Include kernel threads in output]' \
168 ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
172 {-h,--help}'[Show this help]' \
173 '--version[Print version and exit]' \
174 '(-c -m -i -t)-p[Order by path]' \
175 '(-c -p -m -i)-t[Order by number of tasks]' \
176 '(-m -p -i -t)-c[Order by CPU load]' \
177 '(-c -p -i -t)-m[Order by memory load]' \
178 '(-c -m -p -t)-i[Order by IO load]' \
179 {-d,--delay=}'[Specify delay]' \
180 {-n,--iterations=}'[Run for N iterations before exiting]' \
181 {-b,--batch}'[Run in batch mode, accepting no input]' \
182 '--depth=[Maximum traversal depth]'
186 {-h,--help}'[Show this help]' \
187 '--version[Show package version]' \
188 '--no-pager[Do not pipe output into a pager]' \
189 '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
190 {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
191 ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
195 {-h,--help}'[Show this help]' \
196 '--version[Show package version]' \
197 {-c,--container}'[Only detect whether we are run in a container]' \
198 {-v,--vm}'[Only detect whether we are run in a VM]' \
199 {-q,--quiet}"[Don't output anything, just set return value]"
203 {-h,--help}'[Show this help]' \
204 '--version[Show package version]' \
205 '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
206 '--who=[A descriptive string who is inhibiting]' \
207 '--why=[A descriptive string why is being inhibited]' \
208 '--mode=[One of block or delay]' \
209 '--list[List active inhibitors]' \
210 '*:commands:_systemd_inhibit_command'
212 systemd-machine-id-setup)
214 {-h,--help}'[Show this help]' \
215 '--version[Show package version]'
219 {-h,--help}'[Show this help]' \
220 '--version[Show package version]' \
221 '--ready[Inform the init system about service start-up completion.]' \
222 '--pid=[Inform the init system about the main PID of the daemon]' \
223 '--status=[Send a free-form status string for the daemon to the init systemd]' \
224 '--booted[Returns 0 if the system was booted up with systemd]' \
225 '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
229 {-h,--help}'[Show this help]' \
230 {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
231 {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
232 {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \
233 '--uuid=[Set the specified uuid for the container.]' \
234 {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
235 '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
236 '--read-only[Mount the root file system read only for the container.]' \
237 '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
238 "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
239 '-j[Equivalent to --link-journal=guest.]'
243 '--create[Create, set ownership/permissions based on the config files.]' \
244 '--clean[Clean up all files and directories with an age parameter configured.]' \
245 '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
246 '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
247 '--help[Prints a short help text and exits.]' \
250 systemd-tty-ask-password-agent)
252 {-h,--help}'[Prints a short help text and exits.]' \
253 '--version[Prints a short version string and exits.]' \
254 '--list[Lists all currently pending system password requests.]' \
255 '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
256 '--watch[Continuously process password requests.]' \
257 '--wall[Forward password requests to wall(1).]' \
258 '--plymouth[Ask question with plymouth(8).]' \
259 '--console[Ask question on /dev/console.]'
267 _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
268 CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
269 CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
270 CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
271 CAP_SYS_RESOURCE CAP_SYS_BOOT )
272 _values -s , 'capabilities' "$_caps[@]"
275 _systemd_inhibit_command(){
276 if (( CURRENT == 1 )); then
280 local n=${words[(b:2:i)[^-]*]}
281 if (( n <= CURRENT )); then
284 'files:file:_files' \
285 'commands:command:_normal' && return 0
292 _systemd_analyze_command(){
293 local -a _systemd_analyze_cmds
294 _systemd_analyze_cmds=(
295 'time:Print the time taken to start'
296 'blame:prints a list of all running units, ordered by the time they took to initialize'
297 'plot:prints an SVG graphic detailing which system services have been started at what time'
298 'dot:Dump dependency graph for dot(1)'
301 if (( CURRENT == 1 )); then
302 _describe "options" _systemd_analyze_cmds
304 _message "no more options"
308 _hosts_or_user_at_host()
311 'users-hosts:: _user_at_host' \
316 local -a _output_opts
317 _output_opts=(short short-monotonic verbose export json json-pretty json-see cat)
318 _describe -t output 'output mode' _output_opts || compadd "$@"
322 (( $+functions[_systemctl_command] )) || _systemctl_command()
324 local -a _systemctl_cmds
326 "list-units:List units"
327 "start:Start (activate) one or more units"
328 "stop:Stop (deactivate) one or more units"
329 "reload:Reload one or more units"
330 "restart:Start or restart one or more units"
331 "condrestart:Restart one or more units if active"
332 "try-restart:Restart one or more units if active"
333 "reload-or-restart:Reload one or more units if possible, otherwise start or restart"
334 "force-reload:Reload one or more units if possible, otherwise restart if active"
335 "hibernate:Hibernate the system"
336 "hybrid-sleep:Hibernate and suspend the system"
337 "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active"
338 "isolate:Start one unit and stop all others"
339 "kill:Send signal to processes of a unit"
340 "is-active:Check whether units are active"
341 "is-failed:Check whether units are failed"
342 "status:Show runtime status of one or more units"
343 "show:Show properties of one or more units/jobs or the manager"
344 "reset-failed:Reset failed state for all, one, or more units"
345 "load:Load one or more units"
346 "list-unit-files:List installed unit files"
347 "enable:Enable one or more unit files"
348 "disable:Disable one or more unit files"
349 "reenable:Reenable one or more unit files"
350 "preset:Enable/disable one or more unit files based on preset configuration"
351 "mask:Mask one or more units"
352 "unmask:Unmask one or more units"
353 "link:Link one or more units files into the search path"
354 "is-enabled:Check whether unit files are enabled"
355 "list-jobs:List jobs"
356 "cancel:Cancel all, one, or more jobs"
357 "dump:Dump server status"
358 "snapshot:Create a snapshot"
359 "delete:Remove one or more snapshots"
360 "show-environment:Dump environment"
361 "set-environment:Set one or more environment variables"
362 "unset-environment:Unset one or more environment variables"
363 "daemon-reload:Reload systemd manager configuration"
364 "daemon-reexec:Reexecute systemd manager"
365 "default:Enter system default mode"
366 "rescue:Enter system rescue mode"
367 "emergency:Enter system emergency mode"
368 "halt:Shut down and halt the system"
369 "suspend:Suspend the system"
370 "poweroff:Shut down and power-off the system"
371 "reboot:Shut down and reboot the system"
372 "kexec:Shut down and reboot the system with kexec"
373 "exit:Ask for user instance termination"
376 if (( CURRENT == 1 )); then
377 _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
379 local curcontext="$curcontext"
381 cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
382 # Deal with any aliases
384 condrestart) cmd="try-restart";;
385 force-reload) cmd="reload-or-try-restart";;
389 curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
392 zstyle -s ":completion:${curcontext}:" cache-policy update_policy
393 if [[ -z "$update_policy" ]]; then
394 zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
397 _call_function ret _systemctl_$cmd || _message 'no more arguments'
399 _message "unknown systemctl command: $words[1]"
408 _modes=("--user" "--system")
409 systemctl ${words:*_modes} --full --no-legend --no-pager "$@"
413 # Fills the unit list
414 _systemctl_all_units()
416 if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
417 ! _retrieve_cache SYS_ALL_UNITS;
419 _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) )
420 _store_cache SYS_ALL_UNITS _sys_all_units
424 # Fills the unit list including all file units
425 _systemctl_really_all_units()
427 local -a all_unit_files;
428 local -a really_all_units;
429 if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
430 ! _retrieve_cache SYS_REALLY_ALL_UNITS;
432 all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) )
434 really_all_units=($_sys_all_units $all_unit_files)
435 _sys_really_all_units=(${(u)really_all_units})
436 _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
440 _filter_units_by_property() {
441 local property=$1 value=$2 ; shift ; shift
442 local -a units ; units=($*)
444 for ((i=1; $i <= ${#units[*]}; i++)); do
445 # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
446 # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
447 # revert to calling 'systemctl show' once for all units, which is way
450 prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
451 if [[ "${prop}" = "$property=$value" ]]; then
457 _systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )}
458 _systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )}
459 _systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )}
460 _systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )}
461 _systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )}
462 _systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )}
464 # Completion functions for ALL_UNITS
465 for fun in is-active is-failed is-enabled status show mask preset ; do
466 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
468 _systemctl_really_all_units
469 compadd "$@" -a - _sys_really_all_units
473 # Completion functions for ENABLED_UNITS
474 for fun in disable reenable ; do
475 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
477 _systemctl_enabled_units
478 _systemctl_disabled_units
479 compadd "$@" -a - _sys_enabled_units _sys_disabled_units
483 # Completion functions for DISABLED_UNITS
484 (( $+functions[_systemctl_enable] )) || _systemctl_enable()
486 _systemctl_disabled_units
487 compadd "$@" -a - _sys_disabled_units
490 # Completion functions for FAILED_UNITS
491 (( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
493 _systemctl_failed_units
494 compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
497 # Completion functions for STARTABLE_UNITS
498 (( $+functions[_systemctl_start] )) || _systemctl_start()
500 _systemctl_inactive_units
501 compadd "$@" -a - _sys_inactive_units
504 # Completion functions for STOPPABLE_UNITS
505 for fun in stop kill try-restart condrestart ; do
506 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
508 _systemctl_active_units
509 compadd "$@" - $( _filter_units_by_property CanStop yes \
510 ${_sys_active_units[*]} )
514 # Completion functions for ISOLATABLE_UNITS
515 (( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
518 compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
519 ${_sys_all_units[*]} )
522 # Completion functions for RELOADABLE_UNITS
523 for fun in reload reload-or-try-restart force-reload ; do
524 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
526 _systemctl_active_units
527 compadd "$@" - $( _filter_units_by_property CanReload yes \
528 ${_sys_active_units[*]} )
532 # Completion functions for RESTARTABLE_UNITS
533 for fun in restart reload-or-restart ; do
534 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
537 compadd "$@" - $( _filter_units_by_property CanStart yes \
538 ${_sys_all_units[*]} | while read line; do \
539 [[ "$line" =~ \.device$ ]] || echo " $line"; \
544 # Completion functions for MASKED_UNITS
545 (( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
547 _systemctl_masked_units
548 compadd "$@" -a - _sys_masked_units || _message "no masked unit found"
551 # Completion functions for JOBS
552 (( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
554 compadd "$@" - $(__systemctl list-jobs \
555 | cut -d' ' -f1 2>/dev/null ) || _message "no job found"
558 # Completion functions for SNAPSHOTS
559 (( $+functions[_systemctl_delete] )) || _systemctl_delete()
561 compadd "$@" - $(__systemctl list-units --type snapshot --all \
562 | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found"
565 # Completion functions for ENVS
566 for fun in set-environment unset-environment ; do
567 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
569 local fun=$0 ; fun=${fun##_systemctl_}
571 if [[ "${fun}" = "set-environment" ]]; then
575 compadd "$@" ${suf} - $(systemctl show-environment \
576 | while read line; do echo " ${line%%\=}";done )
580 (( $+functions[_systemctl_link] )) || _systemctl_link() { _files }
582 # no systemctl completion for:
583 # [STANDALONE]='daemon-reexec daemon-reload default dump
584 # emergency exit halt kexec list-jobs list-units
585 # list-unit-files poweroff reboot rescue show-environment'
586 # [NAME]='snapshot load'
588 _systemctl_caching_policy()
593 # rebuild if cache is more than a day old
594 oldcache=( "$1"(mh+1) )
595 (( $#oldcache )) && return 0
597 _sysunits=($(__systemctl --all | cut -d' ' -f1))
599 if (( $#_sysunits )); then
600 for unit in $_sysunits; do
601 [[ "$unit" -nt "$1" ]] && return 0
609 local -a journal_fields
610 journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
611 ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
612 _{P,U,G}ID _COMM _EXE _CMDLINE
613 _AUDIT_{SESSION,LOGINUID}
614 _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
616 _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
617 _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
618 _KERNEL_{DEVICE,SUBSYSTEM}
619 _UDEV_{SYSNAME,DEVNODE,DEVLINK}
620 __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
621 _describe 'possible fields' journal_fields
625 local -a _commands _files
626 _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} )
628 'files:/dev files:_files -W /dev -P /dev/' \
629 "commands:commands:($_commands[@])" \
630 'fields:fields:_list_fields'
635 cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
636 _fields=( ${(f)"$(_call_program fields $cmd[@])"} )
638 _describe 'possible values' _fields
642 _loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )}
643 _loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )}
644 _loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )}
646 # Completion functions for SESSIONS
647 for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
648 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
650 _loginctl_all_sessions
651 compadd "$@" -a - _sys_all_sessions
655 # Completion functions for USERS
656 for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
657 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
660 compadd "$@" -a - _sys_all_users
664 # Completion functions for SEATS
665 (( $+functions[_loginctl_seats] )) || _loginctl_seats()
668 compadd "$@" -a - _sys_all_seats
670 for fun in seat-status show-seat terminate-seat ; do
671 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
675 # Completion functions for ATTACH
676 (( $+functions[_loginctl_attach] )) || _loginctl_attach()
680 _arguments -w -C -S -s \
681 ':seat:_loginctl_seats' \
685 # no loginctl completion for:
686 # [STANDALONE]='list-sessions list-users list-seats flush-devices'
688 (( $+functions[_loginctl_command] )) || _loginctl_command()
690 local -a _loginctl_cmds
692 "list-sessions:List sessions"
693 "session-status:Show session status"
694 "show-session:Show properties of one or more sessions"
695 "activate:Activate a session"
696 "lock-session:Screen lock one or more sessions"
697 "unlock-session:Screen unlock one or more sessions"
698 "terminate-session:Terminate one or more sessions"
699 "kill-session:Send signal to processes of a session"
700 "list-users:List users"
701 "user-status:Show user status"
702 "show-user:Show properties of one or more users"
703 "enable-linger:Enable linger state of one or more users"
704 "disable-linger:Disable linger state of one or more users"
705 "terminate-user:Terminate all sessions of one or more users"
706 "kill-user:Send signal to processes of a user"
707 "list-seats:List seats"
708 "seat-status:Show seat status"
709 "show-seat:Show properties of one or more seats"
710 "attach:Attach one or more devices to a seat"
711 "flush-devices:Flush all device associations"
712 "terminate-seat:Terminate all sessions on one or more seats"
715 if (( CURRENT == 1 )); then
716 _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
718 local curcontext="$curcontext"
720 cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
723 curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
725 _call_function ret _loginctl_$cmd || _message 'no more arguments'
727 _message "unknown loginctl command: $words[1]"
733 _hostnamectl_command() {
734 local -a _hostnamectl_cmds
736 "status:Show current hostname settings"
737 "set-hostname:Set system hostname"
738 "set-icon-name:Set icon name for host"
740 if (( CURRENT == 1 )); then
741 _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
743 local curcontext="$curcontext"
744 cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
746 [[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
749 _message "unknown hostnamectl command: $words[1]"
754 _localectl_set-locale() {
755 local -a _confs _locales
757 _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
758 _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
759 if [[ -prefix 1 *\= ]]; then
760 local conf=${PREFIX%%\=*}
762 _wanted locales expl "locales configs" \
763 _combination localeconfs confs=$conf locales "$@" -
765 compadd -S '=' $_confs
769 _localectl_set-keymap() {
771 _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
772 if (( CURRENT <= 3 )); then
773 _describe keymaps _keymaps
775 _message "no more options"
779 _localectl_set-x11-keymap() {
780 if (( $+commands[pkg-config] )); then
781 local -a _file _layout _model _variant _options
783 _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
784 _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
785 _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
786 _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
787 _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
788 _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
789 #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
790 #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
791 #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
792 #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
795 2) _describe layouts _layout ;;
796 3) _describe models _model;;
797 4) _describe variants _variant;;
798 5) _describe options _options;;
799 *) _message "no more options"
805 _localectl_command() {
806 local -a _localectl_cmds
808 'status:Show current locale settings'
809 'set-locale:Set system locale'
810 'list-locales:Show known locales'
811 'set-keymap:Set virtual console keyboard mapping'
812 'list-keymaps:Show known virtual console keyboard mappings'
813 'set-x11-keymap:Set X11 keyboard mapping'
815 if (( CURRENT == 1 )); then
816 _describe -t commands 'localectl command' _localectl_cmds
818 local curcontext="$curcontext"
819 cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
820 if (( $+functions[_localectl_$cmd] )); then
823 _message "no more options"
828 _timedatectl_set-timezone(){
830 _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
831 compadd "$_timezones[@]"
834 _timedatectl_set-time(){
835 _message "YYYY-MM-DD HH:MM:SS"
838 _timedatectl_set-local-rtc(){
841 '0:Maintain RTC in universal time'
842 '1:Maintain RTC in local time'
844 _describe options _options
847 _timedatectl_set-ntp(){
850 '0:Disable NTP based network time configuration'
851 '1:Enable NTP based network time configuration'
853 _describe options _options
856 _timedatectl_command(){
857 local -a _timedatectl_cmds
859 'status:Show current time settings'
860 'set-time:Set system time'
861 'set-timezone:Set system timezone'
862 'list-timezones:Show known timezones'
863 'set-local-rtc:Control whether RTC is in local time'
864 'set-ntp:Control whether NTP is enabled'
866 if (( CURRENT == 1 )); then
867 _describe -t commands 'timedatectl command' _timedatectl_cmds
869 local curcontext="$curcontext"
870 cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
872 if (( $+functions[_timedatectl_$cmd] )); then
875 _message "no more options"
878 _message "unknown timedatectl command: $words[1]"
882 _systemd-coredumpctl_command(){
883 local -a _systemd_coredumpctl_cmds
884 _systemd_coredumpctl_cmds=(
885 'list:List available coredumps'
886 'dump:Print coredump to std'
888 if (( CURRENT == 1 )); then
889 _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
891 local curcontext="$curcontext"
893 cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
895 dumps=( "${(f)$(_call_program dumps "systemd-coredumpctl list 2>/dev/null")}" )
896 if [[ -n "$dumps" ]]; then
897 compadd "${dumps[@]}"
899 _message "no coredumps"
902 _message "no more options"
911 '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
912 '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
913 '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
914 '--root[Print absolute paths in name or symlink query.]' \
915 '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
916 '--export[Print output as key/value pairs.]' \
917 '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
918 '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
919 '--export-db[Export the content of the udev database.]' \
920 '--cleanup-db[Cleanup the udev database.]'
925 '--verbose[Print the list of devices which will be triggered.]' \
926 '--dry-run[Do not actually trigger the event.]' \
927 '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
928 '--action=[Type of event to be triggered.]:actions:(add change remove)' \
929 '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
930 '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
931 '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
932 '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
933 '--property-match=[Trigger events for devices with a matching property value.]' \
934 '--tag-match=property[Trigger events for devices with a matching tag.]' \
935 '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
936 '--parent-match=[Trigger events for all children of a given device.]'
941 '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
942 '--seq-start=[Wait only for events after the given sequence number.]' \
943 '--seq-end=[Wait only for events before the given sequence number.]' \
944 '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
945 '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
946 '--help[Print help text.]'
951 '--exit[Signal and wait for systemd-udevd to exit.]' \
952 '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
953 '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
954 '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
955 '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
956 '--property=[Set a global property for all events.]' \
957 '--children-max=[Set the maximum number of events.]' \
958 '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
959 '--help[Print help text.]'
964 '--kernel[Print the kernel uevents.]' \
965 '--udev[Print the udev event after the rule processing.]' \
966 '--property[Also print the properties of the event.]' \
967 '--subsystem-match=[Filter events by subsystem[/devtype].]' \
968 '--tag-match=[Filter events by property.]' \
969 '--help[Print help text.]'
974 '--action=[The action string.]:actions:(add change remove)' \
975 '--subsystem=[The subsystem string.]' \
976 '--help[Print help text.]' \
977 '*::devpath:_files -P /sys/ -W /sys'
980 _udevadm_test-builtin(){
981 if (( CURRENT == 2 )); then
983 '--help[Print help text]' \
984 '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)'
985 elif (( CURRENT == 3 )); then
987 '--help[Print help text]' \
988 '*::syspath:_files -P /sys -W /sys'
991 '--help[Print help text]'
996 local dev_tmp dpath_tmp mp_tmp mline
998 tmp=( "${(@f)$(< /etc/mtab)}" )
999 dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
1000 mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
1003 mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
1004 dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
1005 dev_tmp=( "${(@q)dev_tmp:#/*}" )
1008 'device-paths: device path:compadd -a dpath_tmp' \
1009 'directories:mount point:compadd -a mp_tmp'
1014 local -a _udevadm_cmds
1016 'info:query sysfs or the udev database'
1017 'trigger:request events from the kernel'
1018 'settle:wait for the event queue to finish'
1019 'control:control the udev daemon'
1020 'monitor:listen to kernel and udev events'
1021 'test:test an event run'
1022 'test-builtin:test a built-in command'
1025 if ((CURRENT == 1)); then
1026 _describe -t commands 'udevadm commands' _udevadm_cmds
1028 local curcontext="$curcontext"
1029 cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
1031 if (( $+functions[_udevadm_$cmd] )); then
1034 _message "no options for $cmd"
1037 _message "no more options"
1044 #vim: set ft=zsh sw=4 ts=4 et