1 #compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent
5 local curcontext="$curcontext" state lstate line
8 # -s for aggregated options like -aP
10 {-h,--help}'[Show help]' \
11 '--version[Show package version]' \
12 {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
13 \*{-p,--property=}'[Show only properties by specific name]:unit property' \
14 {-a,--all}'[Show all units/properties, including dead/empty ones]' \
15 '--failed[Show only failed units]' \
16 "--full[Don't ellipsize unit names on output]" \
17 '--fail[When queueing a new job, fail if conflicting jobs are pending]' \
18 '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
19 '--kill-who=[Who to send signal to]:killwho:(main control all)' \
20 {-s,--signal=}'[Which signal to send]:signal:_signals' \
21 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
22 {-P,--privileged}'[Acquire privileges before execution]' \
23 {-q,--quiet}'[Suppress output]' \
24 '--no-block[Do not wait until operation finished]' \
25 "--no-wall[Don't send wall message before halt/power-off/reboot]" \
26 "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
27 '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
28 '--no-pager[Do not pipe output into a pager]' \
29 '--no-ask-password[Do not ask for system passwords]' \
30 '--order[When generating graph for dot, show only order]' \
31 '--require[When generating graph for dot, show only requirement]' \
32 '--system[Connect to system manager]' \
33 '--user[Connect to user service manager]' \
34 '--global[Enable/disable unit files globally]' \
35 {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
36 '--root=[Enable unit files in the specified root directory]:directory:_directories' \
37 '--runtime[Enable unit files only temporarily until next reboot]' \
38 {-n,--lines=}'[Journal entries to show]:number of entries' \
39 {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \
40 '*::systemctl command:_systemctl_command'
44 {-h,--help}'[Show help]' \
45 '--version[Show package version]' \
46 \*{-p,--property=}'[Show only properties by this name]:unit property' \
47 {-a,--all}'[Show all properties, including empty ones]' \
48 '--kill-who=[Who to send signal to]:killwho:(main control all)' \
49 {-s,--signal=}'[Which signal to send]:signal:_signals' \
50 '--no-ask-password[Do not ask for system passwords]' \
51 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
52 {-P,--privileged}'[Acquire privileges before execution]' \
53 '--no-pager[Do not pipe output into a pager]' \
54 '*::loginctl command:_loginctl_command'
59 {-h,--help}'[Show this help]' \
60 '--version[Show package version]' \
61 '--transient[Only set transient hostname]' \
62 '--static[Only set static hostname]' \
63 '--pretty[Only set pretty hostname]' \
64 '--no-ask-password[Do not prompt for password]' \
65 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
66 '*::hostnamectl commands:_hostnamectl_command'
70 '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
71 '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
72 {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
73 {-b,--this-boot}'[Show data only from current boot]' \
74 {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
75 {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
76 {-f,--follow}'[Follow journal]' \
77 {-n,--lines=}'[Number of journal entries to show]:integer' \
78 '--no-tail[Show all lines, even in follow mode]' \
79 {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
80 {--full}'[Show long fields in full]' \
81 {-a,--all}'[Show all fields, including long and unprintable]' \
82 {-q,--quiet}"[Don't show privilege warning]" \
83 '--no-pager[Do not pipe output into a pager]' \
84 {-m,--merge}'[Show entries from all available journals]' \
85 {-D,--directory=}'[Show journal files from directory]:directories:_directories' \
86 '--interval=[Time interval for changing the FSS sealing key]:time interval' \
87 '--verify-key=[Specify FSS verification key]:FSS key' \
88 {-h,--help}'[Show this help]' \
89 '--version[Show package version]' \
90 '--new-id128[Generate a new 128 Bit ID]' \
91 '--header[Show journal header information]' \
92 '--disk-usage[Show total disk usage]' \
93 {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
94 '--setup-keys[Generate new FSS key pair]' \
95 '--verify[Verify journal file consistency]' \
96 '--list-catalog[List messages in catalog]' \
97 '--update-catalog[Update binary catalog database]' \
101 {-h,--help}'[Show this help]' \
102 '--version[Show package version]' \
103 "--no-convert[Don't convert keyboard mappings]" \
104 '--no-pager[Do not pipe output into a pager]' \
105 '--no-ask-password[Do not prompt for password]' \
106 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
107 '*::localectl commands:_localectl_command'
111 {-o,--output=}'[Write output to FILE]:output file:_files' \
112 '--no-pager[Do not pipe output into a pager]' \
113 {-h,--help}'[Show this help]' \
114 '--version[Show package version]' \
115 '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
120 {-h,--help}'[Show this help]' \
121 '--version[Show package version]' \
122 '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
123 '--no-pager[Do not pipe output into a pager]' \
124 '--no-ask-password[Do not prompt for password]' \
125 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
126 '*::timedatectl commands:_timedatectl_command'
130 '--debug[Print debug messages to stderr]' \
131 '--version[Print version number]' \
132 '--help[Print help text]' \
133 '*::udevadm commands:_udevadm_command'
137 {-h,--help}'[Show help text.]' \
138 '--user[Shows performance data of user sessions instead of the system manager.]' \
139 '*::systemd-analyze commands:_systemd_analyze_command'
141 systemd-ask-password)
143 {-h,--help}'[Show this help]' \
144 '--icon=[Icon name]' \
145 '--timeout=[Timeout in sec]' \
146 '--no-tty[Ask question via agent even on TTY]' \
147 '--accept-cached[Accept cached passwords]' \
148 '--multiple[List multiple passwords if available]'
152 {-h,--help}'[Show this help]' \
153 '--version[Show package version.]' \
154 {-t,--identifier=}'[Set syslog identifier.]' \
155 {-p,--priority=}'[Set priority value.]:value:({0..7})' \
156 '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
161 {-h,--help}'[Show this help]' \
162 '--version[Show package version]' \
163 '--no-pager[Do not pipe output into a pager]' \
164 {-a,--all}'[Show all groups, including empty]' \
165 '-k[Include kernel threads in output]' \
166 ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
170 {-h,--help}'[Show this help]' \
171 '--version[Print version and exit]' \
172 '(-c -m -i -t)-p[Order by path]' \
173 '(-c -p -m -i)-t[Order by number of tasks]' \
174 '(-m -p -i -t)-c[Order by CPU load]' \
175 '(-c -p -i -t)-m[Order by memory load]' \
176 '(-c -m -p -t)-i[Order by IO load]' \
177 {-d,--delay=}'[Specify delay]' \
178 {-n,--iterations=}'[Run for N iterations before exiting]' \
179 {-b,--batch}'[Run in batch mode, accepting no input]' \
180 '--depth=[Maximum traversal depth]'
184 {-h,--help}'[Show this help]' \
185 '--version[Show package version]' \
186 '--no-pager[Do not pipe output into a pager]' \
187 '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
188 {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
189 ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
193 {-h,--help}'[Show this help]' \
194 '--version[Show package version]' \
195 {-c,--container}'[Only detect whether we are run in a container]' \
196 {-v,--vm}'[Only detect whether we are run in a VM]' \
197 {-q,--quiet}"[Don't output anything, just set return value]"
201 {-h,--help}'[Show this help]' \
202 '--version[Show package version]' \
203 '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
204 '--who=[A descriptive string who is inhibiting]' \
205 '--why=[A descriptive string why is being inhibited]' \
206 '--mode=[One of block or delay]' \
207 '--list[List active inhibitors]' \
208 '*:commands:_systemd_inhibit_command'
210 systemd-machine-id-setup)
212 {-h,--help}'[Show this help]' \
213 '--version[Show package version]'
217 {-h,--help}'[Show this help]' \
218 '--version[Show package version]' \
219 '--ready[Inform the init system about service start-up completion.]' \
220 '--pid=[Inform the init system about the main PID of the daemon]' \
221 '--status=[Send a free-form status string for the daemon to the init systemd]' \
222 '--booted[Returns 0 if the system was booted up with systemd]' \
223 '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
227 {-h,--help}'[Show this help]' \
228 {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
229 {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
230 {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \
231 '--uuid=[Set the specified uuid for the container.]' \
232 {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
233 '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
234 '--read-only[Mount the root file system read only for the container.]' \
235 '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
236 "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
237 '-j[Equivalent to --link-journal=guest.]'
241 '--create[Create, set ownership/permissions based on the config files.]' \
242 '--clean[Clean up all files and directories with an age parameter configured.]' \
243 '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
244 '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
245 '--help[Prints a short help text and exits.]' \
248 systemd-tty-ask-password-agent)
250 {-h,--help}'[Prints a short help text and exits.]' \
251 '--version[Prints a short version string and exits.]' \
252 '--list[Lists all currently pending system password requests.]' \
253 '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
254 '--watch[Continuously process password requests.]' \
255 '--wall[Forward password requests to wall(1).]' \
256 '--plymouth[Ask question with plymouth(8).]' \
257 '--console[Ask question on /dev/console.]'
265 _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
266 CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
267 CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
268 CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
269 CAP_SYS_RESOURCE CAP_SYS_BOOT )
270 _values -s , 'capabilities' "$_caps[@]"
273 _systemd_inhibit_command(){
274 if (( CURRENT == 1 )); then
278 local n=${words[(b:2:i)[^-]*]}
279 if (( n <= CURRENT )); then
282 'files:file:_files' \
283 'commands:command:_normal' && return 0
290 _systemd_analyze_command(){
291 local -a _systemd_analyze_cmds
292 _systemd_analyze_cmds=(
293 'time:Print the time taken to start'
294 'blame:prints a list of all running units, ordered by the time they took to initialize'
295 'plot:prints an SVG graphic detailing which system services have been started at what time'
298 if (( CURRENT == 1 )); then
299 _describe "options" _systemd_analyze_cmds
301 _message "no more options"
305 _hosts_or_user_at_host()
308 'users-hosts:: _user_at_host' \
313 local -a _output_opts
314 _output_opts=(short short-monotonic verbose export json json-pretty json-see cat)
315 _describe -t output 'output mode' _output_opts || compadd "$@"
319 (( $+functions[_systemctl_command] )) || _systemctl_command()
321 local -a _systemctl_cmds
323 "list-units:List units"
324 "start:Start (activate) one or more units"
325 "stop:Stop (deactivate) one or more units"
326 "reload:Reload one or more units"
327 "restart:Start or restart one or more units"
328 "condrestart:Restart one or more units if active"
329 "try-restart:Restart one or more units if active"
330 "reload-or-restart:Reload one or more units is possible, otherwise start or restart"
331 "force-reload:Reload one or more units is possible, otherwise restart if active"
332 "reload-or-try-restart:Reload one or more units is possible, otherwise restart if active"
333 "isolate:Start one unit and stop all others"
334 "kill:Send signal to processes of a unit"
335 "is-active:Check whether units are active"
336 "status:Show runtime status of one or more units"
337 "show:Show properties of one or more units/jobs or the manager"
338 "reset-failed:Reset failed state for all, one, or more units"
339 "load:Load one or more units"
340 "list-unit-files:List installed unit files"
341 "enable:Enable one or more unit files"
342 "disable:Disable one or more unit files"
343 "reenable:Reenable one or more unit files"
344 "preset:Enable/disable one or more unit files based on preset configuration"
345 "mask:Mask one or more units"
346 "unmask:Unmask one or more units"
347 "link:Link one or more units files into the search path"
348 "is-enabled:Check whether unit files are enabled"
349 "list-jobs:List jobs"
350 "cancel:Cancel all, one, or more jobs"
351 "dump:Dump server status"
352 "dot:Dump dependency graph for dot(1)"
353 "snapshot:Create a snapshot"
354 "delete:Remove one or more snapshots"
355 "show-environment:Dump environment"
356 "set-environment:Set one or more environment variables"
357 "unset-environment:Unset one or more environment variables"
358 "daemon-reload:Reload systemd manager configuration"
359 "daemon-reexec:Reexecute systemd manager"
360 "default:Enter system default mode"
361 "rescue:Enter system rescue mode"
362 "emergency:Enter system emergency mode"
363 "halt:Shut down and halt the system"
364 "suspend:Suspend the system"
365 "poweroff:Shut down and power-off the system"
366 "reboot:Shut down and reboot the system"
367 "kexec:Shut down and reboot the system with kexec"
368 "exit:Ask for user instance termination"
371 if (( CURRENT == 1 )); then
372 _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
374 local curcontext="$curcontext"
376 cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
377 # Deal with any aliases
379 condrestart) cmd="try-restart";;
380 force-reload) cmd="reload-or-try-restart";;
384 curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
387 zstyle -s ":completion:${curcontext}:" cache-policy update_policy
388 if [[ -z "$update_policy" ]]; then
389 zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
392 _call_function ret _systemctl_$cmd || _message 'no more arguments'
394 _message "unknown systemctl command: $words[1]"
402 systemctl --full --no-legend --no-pager "$@"
406 # Fills the unit list
407 _systemctl_all_units()
409 if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
410 ! _retrieve_cache SYS_ALL_UNITS;
412 _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo "$a"; done; }) )
413 _store_cache SYS_ALL_UNITS _sys_all_units
417 # Fills the unit list including all file units
418 _systemctl_really_all_units()
420 local -a all_unit_files;
421 local -a really_all_units;
422 if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
423 ! _retrieve_cache SYS_REALLY_ALL_UNITS;
425 all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo "$a"; done; }) )
427 really_all_units=($_sys_all_units $all_unit_files)
428 _sys_really_all_units=(${(u)really_all_units})
429 _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
433 _filter_units_by_property() {
434 local property=$1 value=$2 ; shift ; shift
435 local -a units ; units=($*)
437 for ((i=1; $i <= ${#units[*]}; i++)); do
438 # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
439 # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
440 # revert to calling 'systemctl show' once for all units, which is way
443 prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
444 if [[ "${prop}" = "$property=$value" ]]; then
450 _systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo "$a"; done; }) )}
451 _systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" ]] && echo "$a"; done; }) )}
452 _systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo "$a"; done; }) )}
453 _systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo "$a"; done; }) )}
454 _systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo "$a"; done; }) )}
455 _systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo "$a"; done; }) )}
457 # Completion functions for ALL_UNITS
458 for fun in is-active is-enabled status show mask preset ; do
459 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
461 _systemctl_really_all_units
462 compadd "$@" -a - _sys_really_all_units
466 # Completion functions for ENABLED_UNITS
467 for fun in disable reenable ; do
468 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
470 _systemctl_enabled_units
471 compadd "$@" -a - _sys_enabled_units
475 # Completion functions for DISABLED_UNITS
476 (( $+functions[_systemctl_enable] )) || _systemctl_enable()
478 _systemctl_disabled_units
479 compadd "$@" -a - _sys_disabled_units
482 # Completion functions for FAILED_UNITS
483 (( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
485 _systemctl_failed_units
486 compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
489 # Completion functions for STARTABLE_UNITS
490 (( $+functions[_systemctl_start] )) || _systemctl_start()
492 _systemctl_inactive_units
493 compadd "$@" -a - _sys_inactive_units
496 # Completion functions for STOPPABLE_UNITS
497 for fun in stop kill try-restart condrestart ; do
498 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
500 _systemctl_active_units
501 compadd "$@" - $( _filter_units_by_property CanStop yes \
502 ${_sys_active_units[*]} )
506 # Completion functions for ISOLATABLE_UNITS
507 (( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
510 compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
511 ${_sys_all_units[*]} )
514 # Completion functions for RELOADABLE_UNITS
515 for fun in reload reload-or-try-restart force-reload ; do
516 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
518 _systemctl_active_units
519 compadd "$@" - $( _filter_units_by_property CanReload yes \
520 ${_sys_active_units[*]} )
524 # Completion functions for RESTARTABLE_UNITS
525 for fun in restart reload-or-restart ; do
526 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
529 compadd "$@" - $( _filter_units_by_property CanStart yes \
530 ${_sys_all_units[*]} | while read line; do \
531 [[ "$line" =~ \.(device|snapshot|socket|timer)$ ]] || echo "$line"; \
536 # Completion functions for MASKED_UNITS
537 (( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
539 _systemctl_masked_units
540 compadd "$@" -a - _sys_masked_units || _message "no masked unit found"
543 # Completion functions for JOBS
544 (( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
546 compadd "$@" - $(__systemctl list-jobs \
547 | cut -d' ' -f1 2>/dev/null ) || _message "no job found"
550 # Completion functions for SNAPSHOTS
551 (( $+functions[_systemctl_delete] )) || _systemctl_delete()
553 compadd "$@" - $(__systemctl list-units --type snapshot --all \
554 | cut -d' ' -f1 2>/dev/null ) || _message "no snampshot found"
557 # Completion functions for ENVS
558 for fun in set-environment unset-environment ; do
559 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
561 local fun=$0 ; fun=${fun##_systemctl_}
563 if [[ "${fun}" = "set-environment" ]]; then
567 compadd "$@" ${suf} - $(systemctl show-environment \
568 | while read line; do echo "${line%%\=}";done )
572 (( $+functions[_systemctl_link] )) || _systemctl_link() { _files }
574 # no systemctl completion for:
575 # [STANDALONE]='daemon-reexec daemon-reload default dot dump
576 # emergency exit halt kexec list-jobs list-units
577 # list-unit-files poweroff reboot rescue show-environment'
578 # [NAME]='snapshot load'
580 _systemctl_caching_policy()
585 # rebuild if cache is more than a day old
586 oldcache=( "$1"(mh+1) )
587 (( $#oldcache )) && return 0
589 _sysunits=($(__systemctl --all | cut -d' ' -f1))
591 if (( $#_sysunits )); then
592 for unit in $_sysunits; do
593 [[ "$unit" -nt "$1" ]] && return 0
601 local -a journal_fields
602 journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
603 ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
604 _{P,U,G}ID _COMM _EXE _CMDLINE
605 _AUDIT_{SESSION,LOGINUID}
606 _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
607 _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
608 _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
609 _KERNEL_{DEVICE,SUBSYSTEM}
610 _UDEV_{SYSNAME,DEVNODE,DEVLINK}
611 __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
612 _describe 'possible fields' journal_fields
617 cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
618 _fields=( ${(f)"$(_call_program fields $cmd[@])"} )
620 _describe 'possible values' _fields
624 _loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo "$a"; done; }) )}
625 _loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo "$a"; done; }) )}
626 _loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo "$a"; done; }) )}
628 # Completion functions for SESSIONS
629 for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
630 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
632 _loginctl_all_sessions
633 compadd "$@" -a - _sys_all_sessions
637 # Completion functions for USERS
638 for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
639 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
642 compadd "$@" -a - _sys_all_users
646 # Completion functions for SEATS
647 (( $+functions[_loginctl_seats] )) || _loginctl_seats()
650 compadd "$@" -a - _sys_all_seats
652 for fun in seat-status show-seat terminate-seat ; do
653 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
657 # Completion functions for ATTACH
658 (( $+functions[_loginctl_attach] )) || _loginctl_attach()
662 _arguments -w -C -S -s \
663 ':seat:_loginctl_seats' \
667 # no loginctl completion for:
668 # [STANDALONE]='list-sessions list-users list-seats flush-devices'
670 (( $+functions[_loginctl_command] )) || _loginctl_command()
672 local -a _loginctl_cmds
674 "list-sessions:List sessions"
675 "session-status:Show session status"
676 "show-session:Show properties of one or more sessions"
677 "activate:Activate a session"
678 "lock-session:Screen lock one or more sessions"
679 "unlock-session:Screen unlock one or more sessions"
680 "terminate-session:Terminate one or more sessions"
681 "kill-session:Send signal to processes of a session"
682 "list-users:List users"
683 "user-status:Show user status"
684 "show-user:Show properties of one or more users"
685 "enable-linger:Enable linger state of one or more users"
686 "disable-linger:Disable linger state of one or more users"
687 "terminate-user:Terminate all sessions of one or more users"
688 "kill-user:Send signal to processes of a user"
689 "list-seats:List seats"
690 "seat-status:Show seat status"
691 "show-seat:Show properties of one or more seats"
692 "attach:Attach one or more devices to a seat"
693 "flush-devices:Flush all device associations"
694 "terminate-seat:Terminate all sessions on one or more seats"
697 if (( CURRENT == 1 )); then
698 _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
700 local curcontext="$curcontext"
702 cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
705 curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
707 _call_function ret _loginctl_$cmd || _message 'no more arguments'
709 _message "unknown loginctl command: $words[1]"
715 _hostnamectl_command() {
716 local -a _hostnamectl_cmds
718 "status:Show current hostname settings"
719 "set-hostname:Set system hostname"
720 "set-icon-name:Set icon name for host"
722 if (( CURRENT == 1 )); then
723 _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
725 local curcontext="$curcontext"
726 cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
728 [[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
731 _message "unknown hostnamectl command: $words[1]"
736 _localectl_set-locale() {
737 local -a _confs _locales
739 _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
740 _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
741 if [[ -prefix 1 *\= ]]; then
742 local conf=${PREFIX%%\=*}
744 _wanted locales expl "locales configs" \
745 _combination localeconfs confs=$conf locales "$@" -
747 compadd -S '=' $_confs
751 _localectl_set-keymap() {
753 _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
754 if (( CURRENT <= 3 )); then
755 _describe keymaps _keymaps
757 _message "no more options"
761 _localectl_set-x11-keymap() {
762 if (( $+commands[pkg-config] )); then
763 local -a _file _layout _model _variant _options
765 _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
766 _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
767 _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
768 _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
769 _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
770 _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
771 #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
772 #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
773 #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
774 #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
777 2) _describe layouts _layout ;;
778 3) _describe models _model;;
779 4) _describe variants _variant;;
780 5) _describe options _options;;
781 *) _message "no more options"
787 _localectl_command() {
788 local -a _localectl_cmds
790 'status:Show current locale settings'
791 'set-locale:Set system locale'
792 'list-locales:Show known locales'
793 'set-keymap:Set virtual console keyboard mapping'
794 'list-keymaps:Show known virtual console keyboard mappings'
795 'set-x11-keymap:Set X11 keyboard mapping'
797 if (( CURRENT == 1 )); then
798 _describe -t commands 'localectl command' _localectl_cmds
800 local curcontext="$curcontext"
801 cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
802 if (( $+functions[_localectl_$cmd] )); then
805 _message "no more options"
810 _timedatectl_set-timezone(){
812 _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
813 compadd "$_timezones[@]"
816 _timedatectl_set-time(){
817 _message "YYYY-MM-DD HH:MM:SS"
820 _timedatectl_set-local-rtc(){
823 '0:Maintain RTC in universal time'
824 '1:Maintain RTC in local time'
826 _describe options _options
829 _timedatectl_set-ntp(){
832 '0:Disable NTP based network time configuration'
833 '1:Enable NTP based network time configuration'
835 _describe options _options
838 _timedatectl_command(){
839 local -a _timedatectl_cmds
841 'status:Show current time settings'
842 'set-time:Set system time'
843 'set-timezone:Set system timezone'
844 'list-timezones:Show known timezones'
845 'set-local-rtc:Control whether RTC is in local time'
846 'set-ntp:Control whether NTP is enabled'
848 if (( CURRENT == 1 )); then
849 _describe -t commands 'timedatectl command' _timedatectl_cmds
851 local curcontext="$curcontext"
852 cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
854 if (( $+functions[_timedatectl_$cmd] )); then
857 _message "no more options"
860 _message "unknown timedatectl command: $words[1]"
864 _systemd-coredumpctl_command(){
865 local -a _systemd_coredumpctl_cmds
866 _systemd_coredumpctl_cmds=(
867 'list:List available coredumps'
868 'dump:Print coredump to std'
870 if (( CURRENT == 1 )); then
871 _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
873 local curcontext="$curcontext"
875 cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
877 dumps=( "${(f)$(_call_program dumps "systemd-coredumpctl list 2>/dev/null")}" )
878 if [[ -n "$dumps" ]]; then
879 compadd "${dumps[@]}"
881 _message "no coredumps"
884 _message "no more options"
893 '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
894 '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
895 '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
896 '--root[Print absolute paths in name or symlink query.]' \
897 '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
898 '--export[Print output as key/value pairs.]' \
899 '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
900 '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
901 '--export-db[Export the content of the udev database.]' \
902 '--cleanup-db[Cleanup the udev database.]'
907 '--verbose[Print the list of devices which will be triggered.]' \
908 '--dry-run[Do not actually trigger the event.]' \
909 '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
910 '--action=[Type of event to be triggered.]:actions:(add change remove)' \
911 '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
912 '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
913 '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
914 '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
915 '--property-match=[Trigger events for devices with a matching property value.]' \
916 '--tag-match=property[Trigger events for devices with a matching tag.]' \
917 '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
918 '--parent-match=[Trigger events for all children of a given device.]'
923 '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
924 '--seq-start=[Wait only for events after the given sequence number.]' \
925 '--seq-end=[Wait only for events before the given sequence number.]' \
926 '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
927 '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
928 '--help[Print help text.]'
933 '--exit[Signal and wait for systemd-udevd to exit.]' \
934 '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
935 '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
936 '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
937 '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
938 '--property=[Set a global property for all events.]' \
939 '--children-max=[Set the maximum number of events.]' \
940 '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
941 '--help[Print help text.]'
946 '--kernel[Print the kernel uevents.]' \
947 '--udev[Print the udev event after the rule processing.]' \
948 '--property[Also print the properties of the event.]' \
949 '--subsystem-match=[Filter events by subsystem[/devtype].]' \
950 '--tag-match=[Filter events by property.]' \
951 '--help[Print help text.]'
956 '--action=[The action string.]:actions:(add change remove)' \
957 '--subsystem=[The subsystem string.]' \
958 '--help[Print help text.]' \
959 '*::devpath:_files -P /sys/ -W /sys'
962 _udevadm_test-builtin(){
963 if (( CURRENT == 2 )); then
965 '--help[Print help text]' \
966 '*::builtins:(blkid btrfs firmware hwdb input_id kmod path_id usb_id uaccess)'
967 elif (( CURRENT == 3 )); then
969 '--help[Print help text]' \
970 '*::syspath:_files -P /sys -W /sys'
973 '--help[Print help text]'
978 local dev_tmp dpath_tmp mp_tmp mline
980 tmp=( "${(@f)$(< /etc/mtab)}" )
981 dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
982 mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
985 mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
986 dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
987 dev_tmp=( "${(@q)dev_tmp:#/*}" )
990 'device-paths: device path:compadd -a dpath_tmp' \
991 'directories:mount point:compadd -a mp_tmp'
996 local -a _udevadm_cmds
998 'info:query sysfs or the udev database'
999 'trigger:request events from the kernel'
1000 'settle:wait for the event queue to finish'
1001 'control:control the udev daemon'
1002 'monitor:listen to kernel and udev events'
1003 'test:test an event run'
1004 'test-builtin:test a built-in command'
1007 if ((CURRENT == 1)); then
1008 _describe -t commands 'udevadm commands' _udevadm_cmds
1010 local curcontext="$curcontext"
1011 cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
1013 if (( $+functions[_udevadm_$cmd] )); then
1016 _message "no options for $cmd"
1019 _message "no more options"
1026 #vim: set ft=zsh sw=4 ts=4 et