1 #compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent machinectl
5 local curcontext="$curcontext" state lstate line
8 # -s for aggregated options like -aP
10 {-h,--help}'[Show help]' \
11 '--version[Show package version]' \
12 {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
13 \*{-p,--property=}'[Show only properties by specific name]:unit property' \
14 {-a,--all}'[Show all units/properties, including dead/empty ones]' \
15 '--reverse[Show reverse dependencies]' \
16 '--after[Show units ordered after]' \
17 '--before[Show units ordered before]' \
18 '--failed[Show only failed units]' \
19 {-l,--full}"[Don't ellipsize unit names on output]" \
20 '--fail[When queueing a new job, fail if conflicting jobs are pending]' \
21 '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
22 '--kill-who=[Who to send signal to]:killwho:(main control all)' \
23 {-s,--signal=}'[Which signal to send]:signal:_signals' \
24 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
25 {-P,--privileged}'[Acquire privileges before execution]' \
26 {-q,--quiet}'[Suppress output]' \
27 '--no-block[Do not wait until operation finished]' \
28 "--no-wall[Don't send wall message before halt/power-off/reboot]" \
29 "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
30 '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
31 '--no-pager[Do not pipe output into a pager]' \
32 '--no-ask-password[Do not ask for system passwords]' \
33 '--system[Connect to system manager]' \
34 '--user[Connect to user service manager]' \
35 '--global[Enable/disable unit files globally]' \
36 {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
37 '--root=[Enable unit files in the specified root directory]:directory:_directories' \
38 '--runtime[Enable unit files only temporarily until next reboot]' \
39 {-n,--lines=}'[Journal entries to show]:number of entries' \
40 {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \
41 '*::systemctl command:_systemctl_command'
45 {-h,--help}'[Show help]' \
46 '--version[Show package version]' \
47 \*{-p,--property=}'[Show only properties by this name]:unit property' \
48 {-a,--all}'[Show all properties, including empty ones]' \
49 '--kill-who=[Who to send signal to]:killwho:(main control all)' \
50 {-s,--signal=}'[Which signal to send]:signal:_signals' \
51 '--no-ask-password[Do not ask for system passwords]' \
52 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
53 {-P,--privileged}'[Acquire privileges before execution]' \
54 '--no-pager[Do not pipe output into a pager]' \
55 '*::loginctl command:_loginctl_command'
60 {-h,--help}'[Show this help]' \
61 '--version[Show package version]' \
62 '--transient[Only set transient hostname]' \
63 '--static[Only set static hostname]' \
64 '--pretty[Only set pretty hostname]' \
65 '--no-ask-password[Do not prompt for password]' \
66 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
67 '*::hostnamectl commands:_hostnamectl_command'
71 '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
72 '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
73 {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
74 '--system[Show system and kernel messages]' \
75 '--user[Show messages from user services]' \
76 {-b,--this-boot}'[Show data only from current boot]' \
77 {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
78 '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \
79 {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
80 {-f,--follow}'[Follow journal]' \
81 {-n,--lines=}'[Number of journal entries to show]:integer' \
82 '--no-tail[Show all lines, even in follow mode]' \
83 {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
84 {-l,--full}'[Show long fields in full]' \
85 {-a,--all}'[Show all fields, including long and unprintable]' \
86 {-q,--quiet}"[Don't show privilege warning]" \
87 '--no-pager[Do not pipe output into a pager]' \
88 {-m,--merge}'[Show entries from all available journals]' \
89 {-D,--directory=}'[Show journal files from directory]:directories:_directories' \
90 '--interval=[Time interval for changing the FSS sealing key]:time interval' \
91 '--verify-key=[Specify FSS verification key]:FSS key' \
92 {-h,--help}'[Show this help]' \
93 '--version[Show package version]' \
94 '--new-id128[Generate a new 128 Bit ID]' \
95 '--header[Show journal header information]' \
96 '--disk-usage[Show total disk usage]' \
97 {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
98 '--setup-keys[Generate new FSS key pair]' \
99 '--verify[Verify journal file consistency]' \
100 '--list-catalog[List messages in catalog]' \
101 '--update-catalog[Update binary catalog database]' \
102 '*::default: _journal_none'
106 {-h,--help}'[Show this help]' \
107 '--version[Show package version]' \
108 "--no-convert[Don't convert keyboard mappings]" \
109 '--no-pager[Do not pipe output into a pager]' \
110 '--no-ask-password[Do not prompt for password]' \
111 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
112 '*::localectl commands:_localectl_command'
116 {-o,--output=}'[Write output to FILE]:output file:_files' \
117 '--no-pager[Do not pipe output into a pager]' \
118 {-h,--help}'[Show this help]' \
119 '--version[Show package version]' \
120 '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
125 {-h,--help}'[Show this help]' \
126 '--version[Show package version]' \
127 '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
128 '--no-pager[Do not pipe output into a pager]' \
129 '--no-ask-password[Do not prompt for password]' \
130 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
131 '*::timedatectl commands:_timedatectl_command'
135 '--debug[Print debug messages to stderr]' \
136 '--version[Print version number]' \
137 '--help[Print help text]' \
138 '*::udevadm commands:_udevadm_command'
142 {-h,--help}'[Show help text.]' \
143 '--user[Shows performance data of user sessions instead of the system manager.]' \
144 '--order[When generating graph for dot, show only order]' \
145 '--require[When generating graph for dot, show only requirement]' \
146 '*::systemd-analyze commands:_systemd_analyze_command'
148 systemd-ask-password)
150 {-h,--help}'[Show this help]' \
151 '--icon=[Icon name]' \
152 '--timeout=[Timeout in sec]' \
153 '--no-tty[Ask question via agent even on TTY]' \
154 '--accept-cached[Accept cached passwords]' \
155 '--multiple[List multiple passwords if available]'
159 {-h,--help}'[Show this help]' \
160 '--version[Show package version.]' \
161 {-t,--identifier=}'[Set syslog identifier.]' \
162 {-p,--priority=}'[Set priority value.]:value:({0..7})' \
163 '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
168 {-h,--help}'[Show this help]' \
169 '--version[Show package version]' \
170 '--no-pager[Do not pipe output into a pager]' \
171 {-a,--all}'[Show all groups, including empty]' \
172 '-k[Include kernel threads in output]' \
173 ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
177 {-h,--help}'[Show this help]' \
178 '--version[Print version and exit]' \
179 '(-c -m -i -t)-p[Order by path]' \
180 '(-c -p -m -i)-t[Order by number of tasks]' \
181 '(-m -p -i -t)-c[Order by CPU load]' \
182 '(-c -p -i -t)-m[Order by memory load]' \
183 '(-c -m -p -t)-i[Order by IO load]' \
184 {-d,--delay=}'[Specify delay]' \
185 {-n,--iterations=}'[Run for N iterations before exiting]' \
186 {-b,--batch}'[Run in batch mode, accepting no input]' \
187 '--depth=[Maximum traversal depth]'
191 {-h,--help}'[Show this help]' \
192 '--version[Show package version]' \
193 '--no-pager[Do not pipe output into a pager]' \
194 '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
195 {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
196 ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
200 {-h,--help}'[Show this help]' \
201 '--version[Show package version]' \
202 {-c,--container}'[Only detect whether we are run in a container]' \
203 {-v,--vm}'[Only detect whether we are run in a VM]' \
204 {-q,--quiet}"[Don't output anything, just set return value]"
208 {-h,--help}'[Show this help]' \
209 '--version[Show package version]' \
210 '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
211 '--who=[A descriptive string who is inhibiting]' \
212 '--why=[A descriptive string why is being inhibited]' \
213 '--mode=[One of block or delay]' \
214 '--list[List active inhibitors]' \
215 '*:commands:_systemd_inhibit_command'
217 systemd-machine-id-setup)
219 {-h,--help}'[Show this help]' \
220 '--version[Show package version]'
224 {-h,--help}'[Show this help]' \
225 '--version[Show package version]' \
226 '--ready[Inform the init system about service start-up completion.]' \
227 '--pid=[Inform the init system about the main PID of the daemon]' \
228 '--status=[Send a free-form status string for the daemon to the init systemd]' \
229 '--booted[Returns 0 if the system was booted up with systemd]' \
230 '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
234 {-h,--help}'[Show this help]' \
235 {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
236 {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
237 {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \
238 '--uuid=[Set the specified uuid for the container.]' \
239 {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
240 '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
241 '--read-only[Mount the root file system read only for the container.]' \
242 '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
243 "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
244 '-j[Equivalent to --link-journal=guest.]'
248 '--create[Create, set ownership/permissions based on the config files.]' \
249 '--clean[Clean up all files and directories with an age parameter configured.]' \
250 '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
251 '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
252 '--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \
253 '--help[Prints a short help text and exits.]' \
256 systemd-tty-ask-password-agent)
258 {-h,--help}'[Prints a short help text and exits.]' \
259 '--version[Prints a short version string and exits.]' \
260 '--list[Lists all currently pending system password requests.]' \
261 '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
262 '--watch[Continuously process password requests.]' \
263 '--wall[Forward password requests to wall(1).]' \
264 '--plymouth[Ask question with plymouth(8).]' \
265 '--console[Ask question on /dev/console.]'
269 {-h,--help}'[Prints a short help text and exits.]' \
270 '--version[Prints a short version string and exits.]' \
271 {-p,--property=}'[Limit output to specified property.]:property:(Name Id Timestamp TimestampMonotonic Service Scope Leader Class State RootDirectory)' \
272 {-a,--all}'[Show all proerties]' \
273 (-l,--full)'[Do not ellipsize cgroup members]' \
274 '--no-pager[Do not pipe output into a pager]' \
275 '--no-ask-password[Do not ask for system passwords]' \
276 '--kill-who=[Who to send signal to]:killwho:(leader all)' \
277 {-s,--signal=}'[Which signal to send]:signal:_signals' \
278 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
279 {-P,--privileged}'[Acquire privileges before execution]' \
280 '*::machinectl command:_machinectl_command'
288 _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
289 CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
290 CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
291 CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
292 CAP_SYS_RESOURCE CAP_SYS_BOOT )
293 _values -s , 'capabilities' "$_caps[@]"
296 _systemd_inhibit_command(){
297 if (( CURRENT == 1 )); then
301 local n=${words[(b:2:i)[^-]*]}
302 if (( n <= CURRENT )); then
305 'files:file:_files' \
306 'commands:command:_normal' && return 0
313 _systemd_analyze_command(){
314 local -a _systemd_analyze_cmds
315 # Descriptions taken from systemd-analyze --help.
316 _systemd_analyze_cmds=(
317 'time:Print time spent in the kernel before reaching userspace'
318 'blame:Print list of running units ordered by time to init'
319 'critical-chain:Print a tree of the time critical chain of units'
320 'plot:Output SVG graphic showing service initialization'
321 'dot:Dump dependency graph (in dot(1) format)'
324 if (( CURRENT == 1 )); then
325 _describe "options" _systemd_analyze_cmds
327 _message "no more options"
331 _hosts_or_user_at_host()
334 'users-hosts:: _user_at_host' \
339 local -a _output_opts
340 _output_opts=(short short-monotonic verbose export json json-pretty json-see cat)
341 _describe -t output 'output mode' _output_opts || compadd "$@"
345 (( $+functions[_systemctl_command] )) || _systemctl_command()
347 local -a _systemctl_cmds
349 "list-units:List units"
350 "start:Start (activate) one or more units"
351 "stop:Stop (deactivate) one or more units"
352 "reload:Reload one or more units"
353 "restart:Start or restart one or more units"
354 "condrestart:Restart one or more units if active"
355 "try-restart:Restart one or more units if active"
356 "reload-or-restart:Reload one or more units if possible, otherwise start or restart"
357 "force-reload:Reload one or more units if possible, otherwise restart if active"
358 "hibernate:Hibernate the system"
359 "hybrid-sleep:Hibernate and suspend the system"
360 "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active"
361 "isolate:Start one unit and stop all others"
362 "kill:Send signal to processes of a unit"
363 "is-active:Check whether units are active"
364 "is-failed:Check whether units are failed"
365 "status:Show runtime status of one or more units"
366 "show:Show properties of one or more units/jobs or the manager"
367 "reset-failed:Reset failed state for all, one, or more units"
368 "load:Load one or more units"
369 "list-unit-files:List installed unit files"
370 "enable:Enable one or more unit files"
371 "disable:Disable one or more unit files"
372 "reenable:Reenable one or more unit files"
373 "preset:Enable/disable one or more unit files based on preset configuration"
374 "help:Show documentation for specified units"
375 "list-dependencies:Show unit dependency tree"
376 "mask:Mask one or more units"
377 "unmask:Unmask one or more units"
378 "link:Link one or more units files into the search path"
379 "is-enabled:Check whether unit files are enabled"
380 "list-jobs:List jobs"
381 "cancel:Cancel all, one, or more jobs"
382 "dump:Dump server status"
383 "snapshot:Create a snapshot"
384 "delete:Remove one or more snapshots"
385 "show-environment:Dump environment"
386 "set-environment:Set one or more environment variables"
387 "unset-environment:Unset one or more environment variables"
388 "daemon-reload:Reload systemd manager configuration"
389 "daemon-reexec:Reexecute systemd manager"
390 "default:Enter system default mode"
391 "rescue:Enter system rescue mode"
392 "emergency:Enter system emergency mode"
393 "halt:Shut down and halt the system"
394 "suspend:Suspend the system"
395 "poweroff:Shut down and power-off the system"
396 "reboot:Shut down and reboot the system"
397 "kexec:Shut down and reboot the system with kexec"
398 "exit:Ask for user instance termination"
401 if (( CURRENT == 1 )); then
402 _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
404 local curcontext="$curcontext"
406 cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
407 # Deal with any aliases
409 condrestart) cmd="try-restart";;
410 force-reload) cmd="reload-or-try-restart";;
414 curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
417 zstyle -s ":completion:${curcontext}:" cache-policy update_policy
418 if [[ -z "$update_policy" ]]; then
419 zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
422 _call_function ret _systemctl_$cmd || _message 'no more arguments'
424 _message "unknown systemctl command: $words[1]"
433 _modes=("--user" "--system")
434 systemctl ${words:*_modes} --full --no-legend --no-pager "$@"
438 # Fills the unit list
439 _systemctl_all_units()
441 if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
442 ! _retrieve_cache SYS_ALL_UNITS;
444 _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) )
445 _store_cache SYS_ALL_UNITS _sys_all_units
449 # Fills the unit list including all file units
450 _systemctl_really_all_units()
452 local -a all_unit_files;
453 local -a really_all_units;
454 if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
455 ! _retrieve_cache SYS_REALLY_ALL_UNITS;
457 all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) )
459 really_all_units=($_sys_all_units $all_unit_files)
460 _sys_really_all_units=(${(u)really_all_units})
461 _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
465 _filter_units_by_property() {
466 local property=$1 value=$2 ; shift ; shift
467 local -a units ; units=($*)
469 for ((i=1; $i <= ${#units[*]}; i++)); do
470 # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
471 # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
472 # revert to calling 'systemctl show' once for all units, which is way
475 prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
476 if [[ "${prop}" = "$property=$value" ]]; then
482 _systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )}
483 _systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )}
484 _systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )}
485 _systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )}
486 _systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )}
487 _systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )}
489 # Completion functions for ALL_UNITS
490 for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do
491 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
493 _systemctl_really_all_units
494 compadd "$@" -a - _sys_really_all_units
498 # Completion functions for ENABLED_UNITS
499 for fun in disable reenable ; do
500 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
502 _systemctl_enabled_units
503 _systemctl_disabled_units
504 compadd "$@" -a - _sys_enabled_units _sys_disabled_units
508 # Completion functions for DISABLED_UNITS
509 (( $+functions[_systemctl_enable] )) || _systemctl_enable()
511 _systemctl_disabled_units
512 compadd "$@" -a - _sys_disabled_units
515 # Completion functions for FAILED_UNITS
516 (( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
518 _systemctl_failed_units
519 compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
522 # Completion functions for STARTABLE_UNITS
523 (( $+functions[_systemctl_start] )) || _systemctl_start()
525 _systemctl_inactive_units
526 compadd "$@" -a - _sys_inactive_units
529 # Completion functions for STOPPABLE_UNITS
530 for fun in stop kill try-restart condrestart ; do
531 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
533 _systemctl_active_units
534 compadd "$@" - $( _filter_units_by_property CanStop yes \
535 ${_sys_active_units[*]} )
539 # Completion functions for ISOLATABLE_UNITS
540 (( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
543 compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
544 ${_sys_all_units[*]} )
547 # Completion functions for RELOADABLE_UNITS
548 for fun in reload reload-or-try-restart force-reload ; do
549 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
551 _systemctl_active_units
552 compadd "$@" - $( _filter_units_by_property CanReload yes \
553 ${_sys_active_units[*]} )
557 # Completion functions for RESTARTABLE_UNITS
558 for fun in restart reload-or-restart ; do
559 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
562 compadd "$@" - $( _filter_units_by_property CanStart yes \
563 ${_sys_all_units[*]} | while read line; do \
564 [[ "$line" =~ \.device$ ]] || echo " $line"; \
569 # Completion functions for MASKED_UNITS
570 (( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
572 _systemctl_masked_units
573 compadd "$@" -a - _sys_masked_units || _message "no masked unit found"
576 # Completion functions for JOBS
577 (( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
579 compadd "$@" - $(__systemctl list-jobs \
580 | cut -d' ' -f1 2>/dev/null ) || _message "no job found"
583 # Completion functions for SNAPSHOTS
584 (( $+functions[_systemctl_delete] )) || _systemctl_delete()
586 compadd "$@" - $(__systemctl list-units --type snapshot --all \
587 | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found"
590 # Completion functions for ENVS
591 for fun in set-environment unset-environment ; do
592 (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
594 local fun=$0 ; fun=${fun##_systemctl_}
596 if [[ "${fun}" = "set-environment" ]]; then
600 compadd "$@" ${suf} - $(systemctl show-environment \
601 | while read line; do echo " ${line%%\=}";done )
605 (( $+functions[_systemctl_link] )) || _systemctl_link() { _files }
607 # no systemctl completion for:
608 # [STANDALONE]='daemon-reexec daemon-reload default dump
609 # emergency exit halt kexec list-jobs list-units
610 # list-unit-files poweroff reboot rescue show-environment'
611 # [NAME]='snapshot load'
613 _systemctl_caching_policy()
618 # rebuild if cache is more than a day old
619 oldcache=( "$1"(mh+1) )
620 (( $#oldcache )) && return 0
622 _sysunits=($(__systemctl --all | cut -d' ' -f1))
624 if (( $#_sysunits )); then
625 for unit in $_sysunits; do
626 [[ "$unit" -nt "$1" ]] && return 0
634 local -a journal_fields
635 journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
636 ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
637 _{P,U,G}ID _COMM _EXE _CMDLINE
638 _AUDIT_{SESSION,LOGINUID}
639 _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
641 _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
642 _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
643 _KERNEL_{DEVICE,SUBSYSTEM}
644 _UDEV_{SYSNAME,DEVNODE,DEVLINK}
645 __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
646 _describe 'possible fields' journal_fields
650 local -a _commands _files
651 _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} )
653 'files:/dev files:_files -W /dev -P /dev/' \
654 "commands:commands:($_commands[@])" \
655 'fields:fields:_list_fields'
660 cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
661 _fields=( ${(f)"$(_call_program fields $cmd[@])"} )
663 _describe 'possible values' _fields
667 _loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )}
668 _loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )}
669 _loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )}
671 # Completion functions for SESSIONS
672 for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
673 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
675 _loginctl_all_sessions
676 compadd "$@" -a - _sys_all_sessions
680 # Completion functions for USERS
681 for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
682 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
685 compadd "$@" -a - _sys_all_users
689 # Completion functions for SEATS
690 (( $+functions[_loginctl_seats] )) || _loginctl_seats()
693 compadd "$@" -a - _sys_all_seats
695 for fun in seat-status show-seat terminate-seat ; do
696 (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
700 # Completion functions for ATTACH
701 (( $+functions[_loginctl_attach] )) || _loginctl_attach()
705 _arguments -w -C -S -s \
706 ':seat:_loginctl_seats' \
710 # no loginctl completion for:
711 # [STANDALONE]='list-sessions list-users list-seats flush-devices'
713 (( $+functions[_loginctl_command] )) || _loginctl_command()
715 local -a _loginctl_cmds
717 "list-sessions:List sessions"
718 "session-status:Show session status"
719 "show-session:Show properties of one or more sessions"
720 "activate:Activate a session"
721 "lock-session:Screen lock one or more sessions"
722 "unlock-session:Screen unlock one or more sessions"
723 "terminate-session:Terminate one or more sessions"
724 "kill-session:Send signal to processes of a session"
725 "list-users:List users"
726 "user-status:Show user status"
727 "show-user:Show properties of one or more users"
728 "enable-linger:Enable linger state of one or more users"
729 "disable-linger:Disable linger state of one or more users"
730 "terminate-user:Terminate all sessions of one or more users"
731 "kill-user:Send signal to processes of a user"
732 "list-seats:List seats"
733 "seat-status:Show seat status"
734 "show-seat:Show properties of one or more seats"
735 "attach:Attach one or more devices to a seat"
736 "flush-devices:Flush all device associations"
737 "terminate-seat:Terminate all sessions on one or more seats"
740 if (( CURRENT == 1 )); then
741 _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
743 local curcontext="$curcontext"
745 cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
748 curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
750 _call_function ret _loginctl_$cmd || _message 'no more arguments'
752 _message "unknown loginctl command: $words[1]"
758 _hostnamectl_command() {
759 local -a _hostnamectl_cmds
761 "status:Show current hostname settings"
762 "set-hostname:Set system hostname"
763 "set-icon-name:Set icon name for host"
765 if (( CURRENT == 1 )); then
766 _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
768 local curcontext="$curcontext"
769 cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
771 [[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
774 _message "unknown hostnamectl command: $words[1]"
779 _localectl_set-locale() {
780 local -a _confs _locales
782 _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
783 _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
784 if [[ -prefix 1 *\= ]]; then
785 local conf=${PREFIX%%\=*}
787 _wanted locales expl "locales configs" \
788 _combination localeconfs confs=$conf locales "$@" -
790 compadd -S '=' $_confs
794 _localectl_set-keymap() {
796 _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
797 if (( CURRENT <= 3 )); then
798 _describe keymaps _keymaps
800 _message "no more options"
804 _localectl_set-x11-keymap() {
805 if (( $+commands[pkg-config] )); then
806 local -a _file _layout _model _variant _options
808 _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
809 _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
810 _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
811 _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
812 _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
813 _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
814 #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
815 #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
816 #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
817 #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
820 2) _describe layouts _layout ;;
821 3) _describe models _model;;
822 4) _describe variants _variant;;
823 5) _describe options _options;;
824 *) _message "no more options"
830 _localectl_command() {
831 local -a _localectl_cmds
833 'status:Show current locale settings'
834 'set-locale:Set system locale'
835 'list-locales:Show known locales'
836 'set-keymap:Set virtual console keyboard mapping'
837 'list-keymaps:Show known virtual console keyboard mappings'
838 'set-x11-keymap:Set X11 keyboard mapping'
840 if (( CURRENT == 1 )); then
841 _describe -t commands 'localectl command' _localectl_cmds
843 local curcontext="$curcontext"
844 cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
845 if (( $+functions[_localectl_$cmd] )); then
848 _message "no more options"
853 _timedatectl_set-timezone(){
855 _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
856 compadd "$_timezones[@]"
859 _timedatectl_set-time(){
860 _message "YYYY-MM-DD HH:MM:SS"
863 _timedatectl_set-local-rtc(){
866 '0:Maintain RTC in universal time'
867 '1:Maintain RTC in local time'
869 _describe options _options
872 _timedatectl_set-ntp(){
875 '0:Disable NTP based network time configuration'
876 '1:Enable NTP based network time configuration'
878 _describe options _options
881 _timedatectl_command(){
882 local -a _timedatectl_cmds
884 'status:Show current time settings'
885 'set-time:Set system time'
886 'set-timezone:Set system timezone'
887 'list-timezones:Show known timezones'
888 'set-local-rtc:Control whether RTC is in local time'
889 'set-ntp:Control whether NTP is enabled'
891 if (( CURRENT == 1 )); then
892 _describe -t commands 'timedatectl command' _timedatectl_cmds
894 local curcontext="$curcontext"
895 cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
897 if (( $+functions[_timedatectl_$cmd] )); then
900 _message "no more options"
903 _message "unknown timedatectl command: $words[1]"
907 _systemd-coredumpctl_command(){
908 local -a _systemd_coredumpctl_cmds
909 _systemd_coredumpctl_cmds=(
910 'list:List available coredumps'
911 'dump:Print coredump to std'
913 if (( CURRENT == 1 )); then
914 _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
916 local curcontext="$curcontext"
918 cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
920 # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid
921 _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" )
922 if [[ -n "$_dumps" ]]; then
923 _describe -t pids 'coredumps' _dumps
925 _message "no coredumps"
928 _message "no more options"
935 (( $+functions[_machinectl_command] )) || _machinectl_command()
937 local -a _machinectl_cmds
939 "list:List currently running VMs/containers"
940 "status:Show VM/container status"
941 "show:Show properties of one or more VMs/containers"
942 "terminate:Terminate one or more VMs/containers"
943 "kill:Send signal to process or a VM/container"
945 if (( CURRENT == 1 )); then
946 _describe -t commands 'machinectl command' _machinectl_cmds || compadd "$@"
948 local curcontext="$curcontext"
949 cmd="${${_machinectl_cmds[(r)$words[1]:*]%%:*}}"
952 list) msg="no options" ;;
954 _machines=( "${(foa)$(machinectl list | awk '{print $1}')}" )
955 if [[ -n "$_machines" ]]; then
956 _describe 'machines' _machines
958 _message 'no machines'
962 _message "no more options"
969 '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
970 '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
971 '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
972 '--root[Print absolute paths in name or symlink query.]' \
973 '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
974 '--export[Print output as key/value pairs.]' \
975 '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
976 '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
977 '--export-db[Export the content of the udev database.]' \
978 '--cleanup-db[Cleanup the udev database.]'
983 '--verbose[Print the list of devices which will be triggered.]' \
984 '--dry-run[Do not actually trigger the event.]' \
985 '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
986 '--action=[Type of event to be triggered.]:actions:(add change remove)' \
987 '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
988 '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
989 '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
990 '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
991 '--property-match=[Trigger events for devices with a matching property value.]' \
992 '--tag-match=property[Trigger events for devices with a matching tag.]' \
993 '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
994 '--parent-match=[Trigger events for all children of a given device.]'
999 '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
1000 '--seq-start=[Wait only for events after the given sequence number.]' \
1001 '--seq-end=[Wait only for events before the given sequence number.]' \
1002 '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
1003 '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
1004 '--help[Print help text.]'
1009 '--exit[Signal and wait for systemd-udevd to exit.]' \
1010 '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
1011 '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
1012 '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
1013 '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
1014 '--property=[Set a global property for all events.]' \
1015 '--children-max=[Set the maximum number of events.]' \
1016 '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
1017 '--help[Print help text.]'
1022 '--kernel[Print the kernel uevents.]' \
1023 '--udev[Print the udev event after the rule processing.]' \
1024 '--property[Also print the properties of the event.]' \
1025 '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
1026 '--tag-match=[Filter events by property.]' \
1027 '--help[Print help text.]'
1032 '--action=[The action string.]:actions:(add change remove)' \
1033 '--subsystem=[The subsystem string.]' \
1034 '--help[Print help text.]' \
1035 '*::devpath:_files -P /sys/ -W /sys'
1038 _udevadm_test-builtin(){
1039 if (( CURRENT == 2 )); then
1041 '--help[Print help text]' \
1042 '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)'
1043 elif (( CURRENT == 3 )); then
1045 '--help[Print help text]' \
1046 '*::syspath:_files -P /sys -W /sys'
1049 '--help[Print help text]'
1054 local dev_tmp dpath_tmp mp_tmp mline
1056 tmp=( "${(@f)$(< /etc/mtab)}" )
1057 dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
1058 mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
1061 mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
1062 dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
1063 dev_tmp=( "${(@q)dev_tmp:#/*}" )
1066 'device-paths: device path:compadd -a dpath_tmp' \
1067 'directories:mount point:compadd -a mp_tmp'
1072 local -a _udevadm_cmds
1074 'info:query sysfs or the udev database'
1075 'trigger:request events from the kernel'
1076 'settle:wait for the event queue to finish'
1077 'control:control the udev daemon'
1078 'monitor:listen to kernel and udev events'
1079 'test:test an event run'
1080 'test-builtin:test a built-in command'
1083 if ((CURRENT == 1)); then
1084 _describe -t commands 'udevadm commands' _udevadm_cmds
1086 local curcontext="$curcontext"
1087 cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
1089 if (( $+functions[_udevadm_$cmd] )); then
1092 _message "no options for $cmd"
1095 _message "no more options"
1102 #vim: set ft=zsh sw=4 ts=4 et