From: Ben Harris <bjh21@bjh21.me.uk>
Date: Sat, 8 Dec 2018 22:22:23 +0000 (+0000)
Subject: Add a list of parts that I used.
X-Git-Url: https://www.chiark.greenend.org.uk/ucgi/~bjharris/git?a=commitdiff_plain;h=083dcbdae926e0c925b3262839c151ee6d068fd7;p=clunkpi.git

Add a list of parts that I used.
---

diff --git a/index.xhtml b/index.xhtml
index 84986f7..f582a05 100644
--- a/index.xhtml
+++ b/index.xhtml
@@ -39,5 +39,36 @@
     <p>Plug the board into a Raspberry Pi with the square solder pad
       connected to pin 1 of the GPIO connector.  Connect the clock
       (either way around) to the pads labelled "J2".</p>
+    <h2>Parts</h2>
+    <p>The parts I used to assemble my ClunkPi were:</p>
+    <table>
+      <tr><th>Ref</th><th>Brand</th><th>MPN</th>
+	<th>Distributor &amp; PN</th><th>Description</th></tr>
+      <tr><td>D1</td><td>Taiwan Semiconductor</td><td>1N4933</td>
+	<td>Farnell 2677321</td><td>Silicon diode, 50 V, 1 A</td></tr>
+      <tr><td>J1</td><td>Amphenol FCI</td><td>76342-313LF</td>
+	<td>Farnell 1097985</td><td>26-way pin socket</td></tr>
+      <tr><td rowspan='4'>Q1</td>
+	<td>ON Semiconductor</td>
+	<td><a href="https://www.onsemi.com/PowerSolutions/product.do?id=2SC6144SG">2SC6144SG</a></td>
+	<td>Farnell 2533297</td><td>High-gain power transistor</td></tr>
+      <tr><td>Laird</td><td>A15037-101</td>
+	<td>Mouser 739-A15037101</td><td>TO-220 heatsink pad</td></tr>
+      <tr><td/><td/><td>Farnell 149556</td><td>M3 × 10 screw</td></tr>
+      <tr><td/><td/><td>Mackay</td><td>M3 Nyloc nut</td></tr>
+      <tr><td>R1</td><td>Vishay</td>
+	<td><a href="http://www.vishay.com/ppg?28724">MRS25000C5118FCT00</a></td>
+	<td>Farnell 9469303</td><td>Resistor, 5.11 Ω, 1%, 600 mW</td></tr>
+      <tr><td>R2</td><td>Multicomp</td><td>MCRE000032</td>
+	<td>Farnell 1700231</td><td>Resistor, 390 Ω</td></tr>
+      <tr><td>U1</td><td>Texas Instruments</td>
+	<td><a href="https://www.ti.com/product/tlv431/">TLV431CLPE3</a></td>
+	<td>Farnell 1236566</td><td>Shunt regulator, 1.24 V</td></tr>
+    </table>
+    <h2>Boards</h2>
+    <p>I got my boards made by
+      <a href="https://aisler.net">AISLER</a>
+      because they were cheap.  I fed them the KiCad PCB file
+      directly.</p>
   </body>
 </html>