[ Top | Up | Prev | Next | Map | Index ]

Analog 4.14: Analog's reports


This section summarises all of analog's reports, and the main commands which control them. For details on these commands, see the sections on Time reports, Other reports and Hierarchical reports. For exact details on what is counted in each report, see the section on Analog's definitions.

Top lines


Program started at Thu-24-Sep-1998 13:48.
Analysed requests from Wed-16-Sep-1998 09:52 to Mon-21-Sep-1998 02:04 (4.7 days).
The top two lines of the report tell you when the program was run, and which dates it includes data from.

General Summary


(Figures in parentheses refer to the 7 days to 24-Sep-1998 13:48).
Successful requests: 79,646 (48,947)
Average successful requests per day: 17,036 (6,992)
Successful requests for pages: 31,138 (18,689)
Average successful requests for pages per day: 6,660 (2,669)
Failed requests: 9,008 (6,378)
Redirected requests: 344 (235)
Distinct files requested: 8,180 (2,884)
Distinct hosts served: 6,640 (4,991)
Corrupt logfile lines: 2
Data transferred: 976.92 Mbytes (627.06 Mbytes)
Average data transferred per day: 208.96 Mbytes (89.58 Mbytes)
The General Summary contains some overall statistics about the data being analysed: the most important being the number of requests (the total number of files downloaded, including graphics); the number of requests for pages (just counting the various pages on your site); the number of distinct hosts (the number of different computers requests have come from); and the amount of data transferred in bytes. For exactly what the various lines mean, see the section on Analog's definitions.

The figures in parentheses represent the seven days given at the top of this report: it's the seven days before the TO time if there was a TO command, or if not the seven days before the report was run.

You can't find out the number of visitors or visits you've had, and don't believe any program which tells you that you can. See the section on How the web works for a discussion of this.

You can turn this report on or off with the GENERAL command. You can include or exclude the figures for the last seven days with the LASTSEVEN command. You may get slightly different lines to those above, depending on other options you have set.

Monthly, Weekly, Daily, Hourly, Quarter-Hour and Five-Minute Reports


Each unit (+) represents 800 requests for pages, or part thereof.
week beg.: #reqs: pages: 
---------: -----: -----: 
13/Sep/98: 69614: 25277: ++++++++++++++++++++++++++++++++
20/Sep/98: 10032:  5861: ++++++++
Busiest week: week beginning 13/Sep/98 (26,654 requests for pages).
These reports tell you how many requests there were in each time period. They also tell you which was the busiest time period.

You can control whether each report is included or not with the appropriate ON or OFF command. You can control which columns are listed by the COLS commands. You can control which measurement to use for the bar charts and the "busiest" line by the GRAPH commands. You can determine how many rows are displayed with the ROWS commands. You can display the lines backwards or forwards in time by the BACK commands. You can change the graphic used for the bar charts with the BARSTYLE command.

Daily and Hourly Summaries


Each unit (+) represents 150 requests for pages, or part thereof.
day: #reqs: pages: 
---: -----: -----: 
Sun:  2031:  1193: ++++++++
Mon:  8001:  4668: ++++++++++++++++++++++++++++++++
Tue:     0:     0: 
Wed: 13934:  5915: ++++++++++++++++++++++++++++++++++++++++
[etc.]

These reports tell you the total number of requests in each day of the week, or each hour of the day, over the time period given at the very top of the report. (It's not the average, nor is it the figures for just the last week or last day).

You can control whether each report is included or not with the appropriate ON or OFF command. You can control which columns are listed by the COLS commands. You can control which measurement to use for the bar charts by the GRAPH commands. You can change the graphic used for the bar charts with the BARSTYLE command.

Other reports


Listing the first 5 files by the number of requests, sorted by the number of requests.
#reqs: %bytes:       last date: file
-----: ------: ---------------: ----
 4123:  2.29%: 21/Sep/98 01:57: /~sret1/analog/
 3064:  0.15%: 21/Sep/98 01:54: /~sret1/analog/analogo.gif
 1737:  0.01%: 21/Sep/98 01:53: /~sret1/images/bar1.gif
 1692:  0.01%: 21/Sep/98 01:53: /~sret1/images/bar16.gif
 1685:  0.01%: 21/Sep/98 01:53: /~sret1/images/bar8.gif
67345: 97.54%: 21/Sep/98 02:04: [not listed: 8,175 files]

The rest of the reports are all quite similar. Here is a list of them. If you're unfamiliar with some of the terms, see the section on Analog's definitions. Usually you can only get some of these reports, depending on what information is recorded in your logfile.

As usual, you can control whether each report is included or not with the appropriate ON or OFF command. You can control which columns are listed by the COLS commands. You can change how the reports are sorted by the SORTBY commands. You can control how many items are listed by the FLOOR commands. You can include or exclude individual items with the output INCLUDE and EXCLUDE commands. You can change the names of items in the reports with the OUTPUTALIAS commands.

The "not listed" line at the bottom counts those items which didn't get enough traffic to get above the FLOOR for the report, and those which were explicitly EXCLUDEd.

Most of these reports have a hierarchical structure, like this example for the Domain Report:


Listing the first 5 domains by the number of requests, sorted by the number of requests.
no.: #reqs: %bytes: domain
---: -----: ------: ------
  1: 13243: 16.23%: .com (Commercial)
   :  1262:  1.26%:   aol.com
  2: 11783: 25.64%: .jp (Japan)
   :  9592: 22.19%:   ad.jp
   :  1043:  1.97%:   co.jp
  3: 10073: 11.62%: .net (Network)
   :  1926:  1.71%:   uu.net
  4:  9657: 13.31%: [unresolved numerical addresses]
  5:  7388:  8.04%: .uk (United Kingdom)
   :  5792:  5.74%:   ac.uk
   :  1510:  1.99%:   co.uk
   : 18502: 25.16%: [not listed: 82 domains]

You can control which items are listed on the lower levels by the SUB family of commands. There are also separate sub-SORTBY and sub-FLOOR commands for the lower levels. (Called ARGSSORTBY and ARGSFLOOR for some reports, such as the Request Report.) Notice that the lower levels are always listed with their parents, so they break up the sort order. Also, they don't count towards the total number of items listed, so there are only 5 domains listed in the example above, as you can see in the first column. (The N column is particularly useful in hierarchical reports for this reason.)

Which files are linked to in the Request Report is controlled by the LINKINCLUDE and LINKEXCLUDE commands, and which files are linked to in the various referrer reports is controlled by the REFLINKINCLUDE and REFLINKEXCLUDE commands. The links in the Request Report are also affected by the BASEURL command.

Bottom lines


This analysis was produced by analog 4.14.
Running time: 8 seconds.

At the end of the report you can see which version of analog produced the report, and how long the report took to run.
Go to the analog home page.

Stephen Turner
22 January 2001

Need help with analog? Use the analog-help mailing list.

[ Top | Up | Prev | Next | Map | Index ]