X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~mdw/git/tripe/blobdiff_plain/a62f8e8a94bf56194539f7140a1215bc74309b36..844abf94571ffdd3e113c518947073ff5375d748:/svc/tripe-ifup.in

diff --git a/svc/tripe-ifup.in b/svc/tripe-ifup.in
index fc902dab..032142c5 100644
--- a/svc/tripe-ifup.in
+++ b/svc/tripe-ifup.in
@@ -15,11 +15,27 @@
 
 set -e
 
+## Import compile-time configuration.
 : ${bindir=@bindir@}
 : ${tripectl=$bindir/tripectl}
 PATH=/usr/bin:/usr/sbin:/bin:/sbin:$bindir
 export PATH TRIPEDIR
 
+## Determine whether we have IPv6 support.
+if [ -d /proc/sys/net/ipv6 ]; then have6=t; else have6=nil; fi
+
+###--------------------------------------------------------------------------
+### Error handling.
+
+win=t
+try () {
+  if "$@"; then :; else
+    rc=$?
+    tripectl warn tripe-ifup command-failed rc=$rc "$*"
+    win=nil
+  fi
+}
+
 ###--------------------------------------------------------------------------
 ### Collect arguments.
 
@@ -42,37 +58,120 @@ esac
 
 case "${P_IFNAME+set}" in
   set)
-    ip link set "$ifname" name "$P_IFNAME"
+    try ip link set "$ifname" name "$P_IFNAME"
     ifname=$P_IFNAME
     $tripectl setifname "$peer" "$ifname"
     ;;
 esac
 
 ###--------------------------------------------------------------------------
-### Configure the point-to-point link.
+### Configure the link.
+
+## Split local addresses into v4 and v6 lists.
+unset l4addr l6addr
+for a in $P_LADDR; do
+  case "$a" in
+    *:*) l6addr=${l6addr+$l6addr }$a ;;
+    *)   l4addr=${l4addr+$l4addr }$a ;;
+  esac
+done
+
+## Determine the remote v4 and v6 addresses.  We only allow one remote
+## address for each: others can be added as routes.
+unset r4addr r6addr
+for a in $P_RADDR; do
+  case "$a" in
+    *:*) r6addr=$a ;;
+    *)   r4addr=$a ;;
+  esac
+done
+
+## Configure the first v4 address as point-to-point; add the others as plain
+## addresses.
+haveaddr4=nil
+set -- $l4addr
+case $#,${r4addr+set} in
+  [1-9]*,set)
+    try ip addr add "$1" peer "$r4addr" dev "$ifname"
+    haveaddr4=t
+    shift
+    ;;
+esac
+for a in "$@"; do
+  try ip addr add "$a" dev "$ifname"
+  haveaddr4=t
+done
+
+## IPv6 point-to-point links seem broken in Linux.  Attach the local and
+## remote addresses by hand.
+haveaddr6=nil
+set -- $l6addr
+case $have6,$# in
+  t,[1-9]*)
+
+    ## If we're configured to set IPv6 addresses then we should ensure that
+    ## they're going to work, even if the default setting for new interfaces
+    ## is to disable IPv6.
+    try sysctl -q net.ipv6.conf."$ifname".disable_ipv6=0
+
+    ## Now add the source and destination addresses.
+    for a in "$@"; do
+      try ip addr add "$a" dev "$ifname"
+      haveaddr6=t
+    done
+    case ${r6addr+set} in
+      set) try ip route add $r6addr proto static dev "$ifname" ;;
+    esac
+    ;;
+esac
+
+###--------------------------------------------------------------------------
+### Bring the interface up.
 
-ifup=no
-case "${P_LADDR+set},${P_RADDR+set}" in
-  set,set)
+case $haveaddr4,$haveaddr6 in
+  nil,nil)
+    ;;
+  *)
     case "${P_MTU+set}" in
-      set) mtu=$P_MTU;;
+      set)
+	mtu=$P_MTU;;
       *)
 	pathmtu=$(pathmtu "$addr")
-	mtu=$(expr "$pathmtu" - 33 - $A_CIPHER_BLKSZ - $A_MAC_TAGSZ)
+	mtu=$(expr "$pathmtu" - 29 - $A_BULK_OVERHEAD)
 	;;
     esac
-    ifconfig "$ifname" "$P_LADDR" pointopoint "$P_RADDR" up mtu "$mtu"
-    ifup=yes
+    try ip link set dev "$ifname" up mtu "$mtu"
     ;;
 esac
 
 ###--------------------------------------------------------------------------
 ### Set up routing.
 
-case "$ifup,${P_NETS+set}" in
-  yes,set)
-    for net in $P_NETS; do
-      route add -net $net gw "$P_RADDR" dev "$ifname" metric 2
+## Split the routes into v4 and v6 lists.
+unset route4 route6
+for p in $P_NETS; do
+  case "$p" in
+    *:*) route6=${route6+$route6 }$p ;;
+    *)   route4=${route4+$route4 }$p ;;
+  esac
+done
+
+## Add the v4 routes.
+set -- $route4
+case $haveaddr4,$# in
+  t,[1-9]*)
+    for p in "$@"; do
+      try ip route add $p proto static via "$r4addr"
+    done
+    ;;
+esac
+
+## Add the v6 routes.
+set -- $route6
+case $haveaddr6,$# in
+  t,[1-9]*)
+    for p in "$@"; do
+      try ip route add $p proto static via "${r6addr%/*}"
     done
     ;;
 esac
@@ -89,6 +188,9 @@ esac
 ###--------------------------------------------------------------------------
 ### Issue a notification that we've won.
 
-$tripectl notify tripe-ifup configured "$peer"
+case $win in
+  t) $tripectl notify tripe-ifup configured "$peer" ;;
+  nil) $tripectl notify tripe-ifup configured "$peer" failed ;;
+esac
 
 ###----- That's all, folks --------------------------------------------------