svc/tripe-ifup.in: Trim prefix length from IPv6 address used as gateway.

[tripe] / svc / tripe-ifup.in

diff --git a/svc/tripe-ifup.in b/svc/tripe-ifup.in
index fc902daba2cbc1b9eaae2e0ff6aa6f4e65cca567..ae447db8561b542ac4207a5d6a35f0cbc5ec78f1 100644 (file)
--- a/svc/tripe-ifup.in
+++ b/svc/tripe-ifup.in
@@ -15,11 +15,15 @@
 
 set -e
 
+## Import compile-time configuration.
 : ${bindir=@bindir@}
 : ${tripectl=$bindir/tripectl}
 PATH=/usr/bin:/usr/sbin:/bin:/sbin:$bindir
 export PATH TRIPEDIR
 
+## Determine whether we have IPv6 support.
+if [ -d /proc/sys/net/ipv6 ]; then have6=t; else have6=nil; fi
+
 ###--------------------------------------------------------------------------
 ### Collect arguments.
 
@@ -49,30 +53,106 @@ case "${P_IFNAME+set}" in
 esac
 
 ###--------------------------------------------------------------------------
-### Configure the point-to-point link.
+### Configure the link.
+
+## Split local addresses into v4 and v6 lists.
+unset l4addr l6addr
+for a in $P_LADDR; do
+  case "$a" in
+    *:*) l6addr=${l6addr+$l6addr }$a ;;
+    *)   l4addr=${l4addr+$l4addr }$a ;;
+  esac
+done
+
+## Determine the remote v4 and v6 addresses.  We only allow one remote
+## address for each: others can be added as routes.
+unset r4addr r6addr
+for a in $P_RADDR; do
+  case "$a" in
+    *:*) r6addr=$a ;;
+    *)   r4addr=$a ;;
+  esac
+done
+
+## Configure the first v4 address as point-to-point; add the others as plain
+## addresses.
+haveaddr4=nil
+set -- $l4addr
+case $#,${r4addr+set} in
+  [1-9]*,set)
+    ip addr add "$1" peer "$r4addr" dev "$ifname"
+    haveaddr4=t
+    shift
+    ;;
+esac
+for a in "$@"; do
+  ip addr add "$a" dev "$ifname"
+  haveaddr4=t
+done
+
+## IPv6 point-to-point links seem broken in Linux.  Attach the local and
+## remote addresses by hand.
+haveaddr6=nil
+set -- $l6addr
+case $have6,$# in
+  t,[1-9]*)
+    for a in "$@"; do
+      ip addr add "$a" dev "$ifname"
+      haveaddr6=t
+    done
+    case ${r6addr+set} in
+      set) ip route add $r6addr proto static dev "$ifname" ;;
+    esac
+    ;;
+esac
+
+###--------------------------------------------------------------------------
+### Bring the interface up.
 
-ifup=no
-case "${P_LADDR+set},${P_RADDR+set}" in
-  set,set)
+case $haveaddr4,$haveaddr6 in
+  nil,nil)
+    ;;
+  *)
     case "${P_MTU+set}" in
-      set) mtu=$P_MTU;;
+      set)
+       mtu=$P_MTU;;
       *)
        pathmtu=$(pathmtu "$addr")
-       mtu=$(expr "$pathmtu" - 33 - $A_CIPHER_BLKSZ - $A_MAC_TAGSZ)
+       mtu=$(expr "$pathmtu" - 29 - $A_BULK_OVERHEAD)
        ;;
     esac
-    ifconfig "$ifname" "$P_LADDR" pointopoint "$P_RADDR" up mtu "$mtu"
-    ifup=yes
+    ip link set dev "$ifname" up mtu "$mtu"
     ;;
 esac
 
 ###--------------------------------------------------------------------------
 ### Set up routing.
 
-case "$ifup,${P_NETS+set}" in
-  yes,set)
-    for net in $P_NETS; do
-      route add -net $net gw "$P_RADDR" dev "$ifname" metric 2
+## Split the routes into v4 and v6 lists.
+unset route4 route6
+for p in $P_NETS; do
+  case "$p" in
+    *:*) route6=${route6+$route6 }$p ;;
+    *)   route4=${route4+$route4 }$p ;;
+  esac
+done
+
+## Add the v4 routes.
+set -- $route4
+case $haveaddr4,$# in
+  t,[1-9]*)
+    for p in "$@"; do
+      ip route add $p proto static via "$r4addr"
+    done
+    ;;
+esac
+
+## Add the v6 routes.
+set -- $route6
+case $haveaddr6,$# in
+  t,[1-9]*)
+    for p in "$@"; do
+      ip route add $p proto static via "${r6addr%/*}"
     done
     ;;
 esac