If true, include the peer in the
.B %AUTO
record. Used by
+.BR connect (8)
+and
.BR tripe-newpeers (8);
described below.
.TP
+.B connect
+Shell command for initiating connection to this peer. Used by
+.BR watch (8).
+.TP
+.B cork
+Don't initiate immediate key exchange.. Used by
+.BR connect (8).
+.TP
+.B every
+Interval for checking that the peer is still alive and well. Used by
+.BR watch (8).
+.TP
+.B ifdown
+Script to bring down tunnel interface connected to the peer. Used by
+.BR watch (8).
+.TP
+.B ifname
+Interface name to set for the tunnel interface to the peer. Used by
+.BR tripe-ifup (8).
+.TP
+.B ifup
+Script to bring up tunnel interface connected to the peer. Used by
+.BR watch (8).
+.TP
+.B ifupextra
+Script containing additional interface setup. Used by
+.BR tripe-ifup (8).
+.TP
+.B laddr
+Local address for the tunnel interface to the peer. Used by
+.BR tripe-ifup (8).
+.TP
+.B keepalive
+Interval for sending keepalive pings. Used by
+.BR connect (8).
+.TP
+.B mtu
+Maximum transmission unit for the tunnel interface. Used by
+.BR tripe-ifup (8).
+.TP
+.B nets
+Networks to be routed over the tunnel interface. Used by
+.BR tripe-ifup (8).
+.TP
+.B peer
+Network address for this peer, or
+.BR PASSIVE .
+Used by
+.BR connect (8).
+.TP
+.B raddr
+Remote address for the tunnel interface to the peer. Used by
+.BR tripe-ifup (8).
+.TP
+.B retries
+Number of failed ping attempts before attempting reconnection. Used by
+.BR watch (8).
+.TP
+.B timeout
+Timeout for ping probes. Used by
+.BR watch (8).
+.TP
+.B tunnel
+Tunnel driver to use when adding the peer. Used by
+.BR connect (8)).
+.TP
.B user
Peer will make active connection as
.IR user .
Used by
+.BR connect (8)
+and
.BR tripe-newpeers (8);
described below.
.SS "Conversion"
.PP
.BR tripe-newpeers (8),
.BR peers.cdb (5),
+.BR connect (8),
+.BR watch (8),
.BR tripe-ifup (8).
.
.\"--------------------------------------------------------------------------