#! /bin/sh
###
### TRIPE_SLIPIF dynamic allocation script for use with `userv-ipif'
###
### (c) 2012 Mark Wooding
###

###----- Licensing notice ---------------------------------------------------
###
### This file is part of Trivial IP Encryption (TrIPE).
###
### TrIPE is free software; you can redistribute it and/or modify
### it under the terms of the GNU General Public License as published by
### the Free Software Foundation; either version 2 of the License, or
### (at your option) any later version.
###
### TrIPE is distributed in the hope that it will be useful,
### but WITHOUT ANY WARRANTY; without even the implied warranty of
### MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
### GNU General Public License for more details.
###
### You should have received a copy of the GNU General Public License
### along with TrIPE; if not, write to the Free Software Foundation,
### Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

###--------------------------------------------------------------------------
### Instructions.
###
### This script is an adaptor for attaching tripe's `slip' tunnel driver to
### `userv-ipif'.  The latter is a service for GNU Userv which allows
### otherwise unprivileged users to implement network devices, subject to
### administrative limitations on which addresses can be configured and which
### prefixes routed through them.  The software is available as part of the
### `userv-utils' package.
###
### To use this script, you'll need to set up a configuration file
### `$TRIPEDIR/ipif.tab'.  This file may contain comments (begining `#') and
### blank lines, both of which are ignored, and entries of the form
###
### PEER	REMOTE-EXT	LOCAL-INT	REMOTE-INT	ROUTE,...
###
### The PEER names a peer, as given to tripe's ADD command.  REMOTE-EXT is
### the external IP address of the peer, i.e., the one which tripe will send
### its packets to.  LOCAL-INT and REMOTE-INT are the local and remote
### addresses to be associated with the point-to-point interface.  Finally,
### the ROUTEs are a comma-separated list of PREFIX/LEN pairs declaring
### which prefixes should be routed over this interface.  The *-INT and
### ROUTEs fields are passed on to the `userv-ipif' service.  The REMOTE-EXT
### field is used (a) by the accompanying `ipif-peers' script to set up the
### peer association, and (b) to determine the correct MTU to set; it
### should have the form ADDRESS[:PORT], where the PORT defaults to 4070 if
### it's not given explicitly.
###
### Having done all of that, and having configured userv-ipif correctly,
### you should set TRIPE_SLIPIF=.../tripe-ipif and everything should just
### work.  If you drop the script `ipif-peers' into the $TRIPEDIR/peers
### directory, then the init script will run it and all of the configured
### peers with known remote addresses will be added on startup.

set -e
quis=${0##*/}
: ${TRIPEDIR=@configdir@}
: ${logfile=@logfile@}
: ${TRIPE_IPIF_LOG=${logfile%/*}/tripe-ipif.log}

## Parse the command line.
case $# in 1) ;; *) echo >&2 "Usage: $quis PEER"; exit 1 ;; esac
case ${TRIPEDIR+t} in
  t) ;;
  *) echo >&2 "$quis: \`TRIPEDIR' unset"; exit 1 ;;
esac
peer=$1

## Arrange for errors to go somewhere.
exec 2>>"$TRIPE_IPIF_LOG"
now=$(date +"%Y-%m-%d %H:%M:%S")
echo >&2 "$now $quis[$$] running for peer \`$peer'"

## Find the record in the peer table.
foundp=nil
while read name remote_ext local_int remote_int routes; do
  case $name in "$peer") foundp=t; break ;; esac
done <$TRIPEDIR/ipif.tab
case $foundp in
  nil) echo >&2 "$quis[$$]: unknown peer \`$peer'"; exit 1 ;;
esac

## Announce the interface name.  We actually have no way to determine this,
## so lie and hope that nobody cares.
echo "userv-$peer"

## Now we can interrogate the server without deadlocking it.
algs=$(tripectl algs) tagsz=nil blksz=nil
while read line; do
  for i in $line; do
    case $i in
      cipher-blksz=*) blksz=${i#*=} ;;
      mac-tagsz=*) tagsz=${i#*=} ;;
    esac
  done
done <<EOF
$algs
EOF
case ,$tagsz,$blksz, in
  *,nil,*) echo >&2 "$quis[$$]: failed to discover cipher suite"; exit 1 ;;
esac

## Determine the remote address if none is specified; strip off a port number
## if there is one.
case "$remote_ext" in
  -)
    addr=$(tripectl addr $peer)
    set -- $addr
    case $1 in
      INET) remote_ext=$2 ;;
      *) echo >&2 "$quis: unexpected address family \`$1'"; exit 1 ;;
    esac
    ;;
  *:*)
    remote_ext=${remote_ext%:*}
    ;;
esac

## Determine the MTU based on the path.
pmtu=$(pathmtu $remote_ext)
mtu=$(( $pmtu - 33 - $tagsz - $blksz ))

## Obtain the tunnel and run it.
now=$(date +"%Y-%m-%d %H:%M:%S")
info="invoking \`userv ipif' for \`$peer'; mtu = $mtu"
info="$info; $local_int -> $remote_int${routes+ $routes}"
echo >&2 "$now $quis[$$] $info"
exec userv root ipif $local_int,$remote_int,$mtu,slip $routes

###----- That's all, folks --------------------------------------------------