0fa31a96 |
1 | # tripe configuration file |
2 | # |
ef4a1ab7 |
3 | # this is sourced as a Bourne shell script by /etc/init.d/tripe |
0fa31a96 |
4 | |
5 | # The directory you want tripe to work in. This is where it will search for |
6 | # keyrings, and where its admin socket and logfile are kept. |
ef4a1ab7 |
7 | # TRIPEDIR=/etc/tripe |
0fa31a96 |
8 | |
52c03a2a |
9 | # The name of the private key to use. This is usually `tripe-dh' for |
10 | # integer Diffie-Hellman keys (the default) or `tripe-ec' for elliptic |
11 | # curve keys. |
12 | # keytag=tripe-dh |
13 | |
0fa31a96 |
14 | # The address you want tripe to bind to. By default, tripe will accept |
15 | # packets to any address acceptable to the host, and send packets from the |
16 | # most appropriate address for the destination; setting this means it will |
17 | # (a) only accept packets destined for the named address, and (b) send |
18 | # packets from the named address. The latter is probably more useful. |
19 | # addr=MYHOST |
20 | |
21 | # The UDP port you want tripe to use. I've chosen 22003 which isn't reserved |
22 | # in any way. I chose it because it's the first two bytes of the RIPEMD-160 |
23 | # hash of the string `TrIPE'. If you don't set a port, tripe gets the kernel |
24 | # to choose a port it's not using right now, and you have to dig it out by |
25 | # saying `tripectl port'. |
26 | # port=22003 |
27 | |
42da2a58 |
28 | # The tunnel device you want tripe to use. The default is to use a system- |
29 | # specific device, if there's one compiled in, or SLIP if not. |
30 | # tunnel=slip |
31 | |
0fa31a96 |
32 | # The user to run as once tripe has initialized. The user (or group -- see |
33 | # `group' below) must be able to open new tunnel interfaces. |
34 | # user=tripe |
35 | |
36 | # The group to run as once tripe has initialized. See caveats for `user' |
37 | # above. |
38 | # group=tripe |
39 | |
40 | # Trace options to pass to tripe. The default is no tracing. The setting |
41 | # `A-cp' gives maxmimum possible verbosity without leaking important |
42 | # secrets. |
43 | # trace=A-cp |
44 | |
45 | # Any other options to pass on to tripectl. |
46 | # miscopts= |
47 | |
48 | # Logfile to write to. The default is `tripe.log' in the working directory. |
ef4a1ab7 |
49 | # logfile=/var/log/tripe |
50 | |
51 | # Where to put tripectl's pidfile when it starts up. The default is |
52 | # tripectl.pid in the working directory. |
53 | # pidfile=/var/run/tripectl.pid |