| 1 | secnet (0.4.4~) unstable; urgency=medium |
| 2 | |
| 3 | Administrivia: |
| 4 | * Fix erroneous GPL3+ licence notices "version d or later" (!) |
| 5 | |
| 6 | -- |
| 7 | |
| 8 | secnet (0.4.3) unstable; urgency=low |
| 9 | |
| 10 | Security improvement: |
| 11 | * Use `mpz_powm_sec' for modexps. |
| 12 | |
| 13 | Enhancements: |
| 14 | * Implement comm-info and dedicated-interface-addr feature, for |
| 15 | benefit of hippotat. |
| 16 | * Implement `keepalive' site option, to try to keep link always up. |
| 17 | |
| 18 | Build etc. fixes: |
| 19 | * #include <limits.h> (fixes the build on jessie). |
| 20 | * Tolerate building from a git checkout, but with git not installed. |
| 21 | (This can happen in chroots.) |
| 22 | * Turn off -Wsign-compare for bison output. |
| 23 | * Makefile.in: Fix `check-ipaddrset' rule to get reference from |
| 24 | $(srcdir). (Makes out-of-tree builds work properly.) |
| 25 | * Release checklist fixes. |
| 26 | * Burn version numbers 0.4.1 and 0.4.2 due to errors in release prep. |
| 27 | |
| 28 | Bugfixes: |
| 29 | * When printing messages about dropping IPv6, do not print anything |
| 30 | about ihl. (Check the IP version field first!) |
| 31 | * When turning on debug, turn on verbose too. |
| 32 | |
| 33 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 25 Nov 2017 13:36:41 +0000 |
| 34 | |
| 35 | secnet (0.4.0) unstable; urgency=low |
| 36 | |
| 37 | Debugging improvements: |
| 38 | * Packet-level debugging from site notes errors from transmit. |
| 39 | * Report when transport peers updated as a result of transmit. |
| 40 | |
| 41 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 28 Feb 2015 15:03:00 +0000 |
| 42 | |
| 43 | secnet (0.4.0~beta2) unstable; urgency=low |
| 44 | |
| 45 | Polypath bugfixes: |
| 46 | * Ignore IPv6 Unique Local unicast addresses. |
| 47 | * Skip "tentative" IPv6 local addresses. |
| 48 | * Improve logging and debug output. |
| 49 | |
| 50 | Portability fix: |
| 51 | * Build where size_t is not compatible with int. |
| 52 | |
| 53 | Build system and packaging fixes: |
| 54 | * Makefile: support DESTDIR. |
| 55 | * debian/rules: set DESTDIR (not prefix). |
| 56 | * debian/rules: Support dpkg-buildflags. |
| 57 | * Install ipaddrset.py and secnet.8 with correct permissions. |
| 58 | * Fix check for <linux/if_tun.h> and git rid of our copy. |
| 59 | * Use -lresolv only if inet_aton is not found otherwise. |
| 60 | * Use -lnsl only if inet_ntoa is not found otherwise. |
| 61 | * debian/rules: Provide build-arch and build-indep targets. |
| 62 | * debian/rules: Do not run build for *-indep (!) |
| 63 | * Makefile.in: Putative dual (backport and not) release build process doc. |
| 64 | |
| 65 | Copyright updates: |
| 66 | * Update to GPLv3. Add missing copyright notices and credits. |
| 67 | * Get rid of old FSF street address; use URL instead. |
| 68 | * Remove obsolete LICENCE.txt (which was for snprintf reimplementation). |
| 69 | * Remove obsolete references to Cendio (for old ipaddr.py). |
| 70 | |
| 71 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 28 Dec 2014 17:14:10 +0000 |
| 72 | |
| 73 | secnet (0.4.0~beta1) unstable; urgency=low |
| 74 | |
| 75 | New features: |
| 76 | * Support transport over IPv6. (We do not yet carry IPv6 in the private |
| 77 | network.) IPv6 support depends on IPv6-capable adns (adns 1.5.x). |
| 78 | * New polypath comm, which can duplicate packets so as to send them via |
| 79 | multiple routes over the public network, for increased |
| 80 | reliability/performance (but increased cost). Currently Linux-only |
| 81 | but should be fairly easy to port. |
| 82 | * Support multiple public addresses for peers. |
| 83 | * Discard previously-received packets (by default). |
| 84 | |
| 85 | Logging improvements: |
| 86 | * Report (each first) transmission and reception success and failure. |
| 87 | * Log reason for DNS reolution failure. |
| 88 | * Log unexpected kinds of death from userv. |
| 89 | * Log authbind exit status as errno value (if appropriate). |
| 90 | |
| 91 | Configuration adjustments: |
| 92 | * Adjust default number of mobile peer addresses to store when a peer |
| 93 | public address is also configured. |
| 94 | * Make specifying peer public port optional. This avoids making special |
| 95 | arrangements to bind to a port for in mobile sites with no public |
| 96 | stable address. |
| 97 | |
| 98 | Bugfixes: |
| 99 | * Hackypar children will die if they get a terminating signal. |
| 100 | * Fix signal dispositions inherited by secnet's child processes. |
| 101 | * Fix off-by-one error which prevented setting transport-peers-max to 5. |
| 102 | |
| 103 | Test, build and internal improvements: |
| 104 | * Use conventional IP address handling library ipaddr.py. |
| 105 | * Provide a fuzzer for the slip decoder. |
| 106 | * Build system improvements. |
| 107 | * Many source code cleanups. |
| 108 | |
| 109 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 26 Oct 2014 15:28:31 +0000 |
| 110 | |
| 111 | secnet (0.3.4) unstable; urgency=low |
| 112 | |
| 113 | SECURITY FIX: |
| 114 | * The previous security fix to buffer handling was entirely wrong. This |
| 115 | one is better. Thanks to Simon Tatham for the report and the patch. |
| 116 | |
| 117 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Mon, 22 Sep 2014 16:16:11 +0100 |
| 118 | |
| 119 | secnet (0.3.3) unstable; urgency=high |
| 120 | |
| 121 | SECURITY FIXES: |
| 122 | * Pass correct size argument to recvfrom. This is a serious security |
| 123 | problem which may be exploitable from outside the VPN. |
| 124 | * Fix a memory leak in some error logging. |
| 125 | |
| 126 | Other related fixes: |
| 127 | * Two other latent bugs in buffer length handling found and fixed. |
| 128 | * Non-critical stylistic improvements to buffer length handling, to make |
| 129 | the code clearer and to assist audit. |
| 130 | |
| 131 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 19 Sep 2014 23:50:45 +0100 |
| 132 | |
| 133 | secnet (0.3.3~beta1) unstable; urgency=low |
| 134 | |
| 135 | Installation compatibility fix: |
| 136 | * In make-secnet-sites, always use our own ipaddr.py even if the |
| 137 | incompatible modern ipaddr.py is installed (eg via python-ipaddr.deb). |
| 138 | (Future versions of secnet are going to need that Python module to be |
| 139 | installed.) |
| 140 | |
| 141 | For links involving mobile sites: |
| 142 | * Use source of NAK packets as hint for peer transport address. |
| 143 | * When initiating rekey, make use of data transport peer addresses. |
| 144 | |
| 145 | Build fix: |
| 146 | * Provide clean target in test-example/Makefile. |
| 147 | |
| 148 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 19 Sep 2014 00:11:44 +0100 |
| 149 | |
| 150 | secnet (0.3.2) unstable; urgency=low |
| 151 | |
| 152 | * Release of 0.3.2. No code changes since 0.3.1~beta1. |
| 153 | |
| 154 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 26 Jun 2014 20:27:58 +0100 |
| 155 | |
| 156 | secnet (0.3.2~beta1) unstable; urgency=low |
| 157 | |
| 158 | For links involving mobile sites: |
| 159 | * SECURITY: Properly update peer address array when it is full. |
| 160 | * Do name-resolution on peer-initiated key setup too, when we are mobile |
| 161 | (and other name-resolution improvements). |
| 162 | |
| 163 | Other minor improvements: |
| 164 | * Log peer addresses on key exchange timeout. |
| 165 | * When printing version (eg during startup), use value from git-describe |
| 166 | and thus include git commit id where applicable. |
| 167 | * Updates to release checklist in Makefile.in. |
| 168 | * Use C99 _Bool for bool_t. |
| 169 | |
| 170 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 06 Jun 2014 01:17:54 +0100 |
| 171 | |
| 172 | secnet (0.3.1) unstable; urgency=low |
| 173 | |
| 174 | * Release of 0.3.1. No code changes since 0.3.1~beta3. |
| 175 | |
| 176 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 15 May 2014 01:08:30 +0100 |
| 177 | |
| 178 | secnet (0.3.1~beta3) unstable; urgency=low |
| 179 | |
| 180 | * Build fixes for non-i386 architectures and gcc 4.8.2. |
| 181 | |
| 182 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 08 May 2014 19:53:43 +0100 |
| 183 | |
| 184 | secnet (0.3.1~beta2) unstable; urgency=low |
| 185 | |
| 186 | Fix relating to new fragmentation / ICMP functionality: |
| 187 | * Generate ICMP packets correctly in point-to-point configurations. |
| 188 | |
| 189 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 03 May 2014 18:58:09 +0100 |
| 190 | |
| 191 | secnet (0.3.1~beta1) unstable; urgency=low |
| 192 | |
| 193 | Security fixes (vulnerabilities are to inside attackers only): |
| 194 | * SECURITY: Fixes to MTU and fragmentation handling. |
| 195 | * SECURITY: Correctly set "unused" ICMP header field. |
| 196 | * SECURITY: Fix IP length check not to crash on very short packets. |
| 197 | |
| 198 | New feature: |
| 199 | * Make the inter-site MTU configurable, and negotiate it with the peer. |
| 200 | |
| 201 | Bugfixes etc.: |
| 202 | * Fix netlink SEGV on clientless netlinks (i.e. configuration error). |
| 203 | * Fix formatting error in p-t-p startup message. |
| 204 | * Do not send ICMP errors in response to unknown incoming ICMP. |
| 205 | * Fix formatting error in secnet.8 manpage. |
| 206 | * Internal code rearrangements and improvements. |
| 207 | |
| 208 | Packaging improvements: |
| 209 | * Updates to release checklist in Makefile.in. |
| 210 | * Additions to the test-example suite. |
| 211 | |
| 212 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 01 May 2014 19:02:56 +0100 |
| 213 | |
| 214 | secnet (0.3.0) unstable; urgency=low |
| 215 | |
| 216 | * Release of 0.3.0. No code changes since 0.3.0~beta3. |
| 217 | * Update release checklist. |
| 218 | |
| 219 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 01 Sep 2013 20:27:48 +0100 |
| 220 | |
| 221 | secnet (0.3.0~beta3) unstable; urgency=low |
| 222 | |
| 223 | * New upstream version. |
| 224 | - Stability bugfix: properly initialise site's scratch buffer. |
| 225 | |
| 226 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Mon, 05 Aug 2013 11:54:09 +0100 |
| 227 | |
| 228 | secnet (0.3.0~beta2) unstable; urgency=low |
| 229 | |
| 230 | * New upstream version. |
| 231 | - SECURITY FIX: RSA public modulus and exponent buffer overflow. |
| 232 | - SECURITY FIX: Use constant-time memcmp for message authentication. |
| 233 | - SECURITY FIX: Provide a new transform, eax-serpent, to replace cbcmac. |
| 234 | - SECURITY FIX: No longer send NAKs for NAKs, avoiding NAK storm. |
| 235 | - SECURITY FIX: Fix site name checking when site name A is prefix of B. |
| 236 | - SECURITY FIX: Safely reject too-short IP packets. |
| 237 | - Better robustness for mobile sites (proper user of NAKs, new PROD msg). |
| 238 | - Better robustness against SLIP decoding errors. |
| 239 | - Fix bugs which caused routes to sometimes not be advertised. |
| 240 | - Protocol capability negotiation mechanism. |
| 241 | - Improvements and fixes to protocol and usage documentation. |
| 242 | - Other bugfixes and code tidying up. |
| 243 | |
| 244 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 25 Jul 2013 18:26:01 +0100 |
| 245 | |
| 246 | secnet (0.3.0~beta1) unstable; urgency=low |
| 247 | |
| 248 | * New upstream version. |
| 249 | - SECURITY FIX: avoid crashes (or buffer overrun) on short packets. |
| 250 | - Bugfixes relating to packet loss during key exchange. |
| 251 | - Bugfixes relating to link up/down status. |
| 252 | - Bugfixes relating to logging. |
| 253 | - make-secnet-sites made more sophisticated to support two vpns on chiark. |
| 254 | - Documentation improvements. |
| 255 | - Build system improvements. |
| 256 | * Debian packaging improvements: |
| 257 | - Native package. |
| 258 | - Maintainer / uploaders. |
| 259 | - init script requires $remove_fs since we're in /usr. |
| 260 | |
| 261 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 12 Jul 2012 20:18:16 +0100 |
| 262 | |
| 263 | secnet (0.2.1-1) unstable; urgency=low |
| 264 | |
| 265 | * New upstream version. (authbind endianness fix) |
| 266 | |
| 267 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 11 Dec 2011 13:14:57 +0000 |
| 268 | |
| 269 | secnet (0.2.0-1) unstable; urgency=low |
| 270 | |
| 271 | * New upstream version. |
| 272 | |
| 273 | -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 10 Dec 2011 22:44:41 +0000 |
| 274 | |
| 275 | secnet (0.1.18-1) unstable; urgency=low |
| 276 | |
| 277 | * New upstream version. |
| 278 | |
| 279 | -- Stephen Early <steve@greenend.org.uk> Tue, 18 Mar 2008 17:45:00 +0000 |