## Obtain the screen dimensions.
case ",$XWIDTH,$XHEIGHT," in
- *,,*) eval $(xscsize -bx) ;;
+ *,,*) eval $(xscsize -bx; xscsize -bmx) ;;
esac
-info "screen size = $XWIDTH x $XHEIGHT"
+case ",$XNSCR," in
+ ,,)
+ XNSCR=1 XSCR0_X=0 XSCR0_Y=0 XSCR0_WIDTH=$XWIDTH XSCR0_HEIGHT=$XHEIGHT
+ ;;
+esac
+i=0; while (( i < XNSCR )); do
+ eval "x=\$XSCR${i}_X y=\$XSCR${i}_Y
+ wd=\$XSCR${i}_WIDTH ht=\$XSCR${i}_HEIGHT"
+ info "screen #$i = ${wd}x${ht}+${x}+${y}"
+ i=$(( i + 1 ))
+done
initialize () {
## Load the X resource database.
### Main screen layout.
## Choose appropriate clients.
-emacs=$(pick_program emacs emacs23 emacs22 emacs21 emacs)
+emacs=$(pick_program emacs \
+ emacs24-lucid emacs23-lucid emacs24 emacs23 emacs22 emacs21 emacs)
term=$(pick_program terminal pterm Eterm xterm)
## Emacs window measurements.
+##
+## e_colsz = width of a column in characters (from `emacs-width' metaconfig)
+## e_charwd = width of a character in pixels (assume `6x13')
+## e_colextra = additional per-column overhead in pixels
+## e_colextrachars = additional per-column overhead in character units
+## e_colwd = basic width of a column in pixels
+## e_hextra = extra horizontal width in pixels
+## Width of an N-column Emacs frame in pixels will be
+## N*e_colwd + e_hextra
+## e_colchars = width of a column in Emacs `-geometry' units
+## e_cextra = extra horizontal width in Emacs `-geometry' units
+## So an N-column frame should be reported to Emacs as being
+## N*e_colchars + e_cextra geometry units wide
+## e_lineht = height of a character line in pixels
+## e_vextra = number of additional vertical cruft pixels
+## So an N-line Emacs frame takes N*e_lineht + e_vextra pixels
+e_colsz=$(mdw-conf emacs-width 77) e_charwd=6
+e_colextra=30 e_colextrachars=5 e_lineht=13
case "$emacs" in
- emacs21 | emacs)
- e_colwd=492 e_hextra=34
- e_colchars=82 e_cextra=-2
- e_lineht=13 e_vextra=52
- ;;
- emacs22 | emacs23)
- e_colwd=492 e_hextra=8
- e_colchars=82 e_cextra=-6
- e_lineht=13 e_vextra=46
- ;;
+ emacs21 | emacs) e_hextra=34 e_cextra=-2 e_vextra=52 ;;
+ emacs22 | emacs23) e_hextra=8 e_cextra=-6 e_vextra=46 ;;
+ emacs24) e_hextra=5 e_cextra=-6 e_vextra=42 ;;
+ emacs23-lucid) e_hextra=7 e_cextra=-6 e_vextra=48 ;;
+ emacs24-lucid) e_hextra=7 e_cextra=-5 e_vextra=48 ;;
esac
+e_colwd=$(( e_colsz*e_charwd + e_colextra ))
+e_colchars=$(( e_colsz + e_colextrachars ))
## Terminal window measurements.
+##
+## t_wd = the window width, in pixels
+## t_lineht, t_vextra = height parameters: if the window is N lines high,
+## then it will be N*t_lineht + t_vextra pixels high
case "$term" in
pterm) t_wd=504 t_lineht=13 t_vextra=23 geom=-geometry;;
Eterm) t_wd=504 t_lineht=13 t_vextra=23 geom=-g;;
esac
## GNOME stuff measurements.
-declare -i xbound="XWIDTH - 113"
+declare -i panelwd=64 xbound=$(( XWIDTH - panelwd ))
## Choose a width for Emacs.
##
-## We'd like it to be as wide as possible, allowing for a column of xterms
-## down the right hand side. However, I'd prefer a double-width Emacs to a
-## single-width Emacs and xterms. If it's not going to work at all, a single
-## Emacs column will have to do. Also, there's a strange thing with Emacs21
-## and the toolbar, so we add on some rows which are later mysteriously
-## subtracted.
-
-declare -i ecols="(xbound - t_wd - e_hextra)/e_colwd"
-if (( ecols < 2 && xbound > e_colwd * 2 + e_hextra )); then
- ecols=2
-elif (( ecols < 1 )); then
- ecols=1
+## We're going to make a single frame of Emacs, which will be automatically
+## divvied into columns; the rest of the space will be tiled with xterms. If
+## we have multiple screens, then Emacs can have the first screen and we'll
+## fill the rest with terminals. Otherwise, we'll try to have N columns of
+## Emacs, and N - 1 columns of xterms; if that doesn't work, we'll make do
+## with N - 2 columns of xterms.
+##
+## So, let W be the available width; let E and T be the widths of an Emacs
+## column (e_colwd) and terminal (t_wd), respectively, and let E0 be the
+## additive width of Emacs's existence (e_hextra). If we have more than one
+## screen, then instead, let T be zero. To start out, then, we let N = 1 +
+## floor((W - E - E0)/(E + T)). If W - E0 - (N + 1) E - (N - 1)*T >= 0, then
+## we increase N by one.
+declare -i lim=XSCR0_WIDTH
+if (( lim > xbound )); then lim=xbound; fi
+declare -i twd=t_wd; if (( XNSCR > 1 )); then twd=0; fi
+declare -i ecols=$(( (lim - e_colwd - e_hextra)/(e_colwd + twd) + 1 ))
+if (( lim - e_hextra - (ecols + 1)*e_colwd - (ecols - 1)*twd >= 0 )); then
+ ecols=$(( ecols + 1 ))
fi
declare -i \
- emacsx="ecols * e_colchars + e_cextra" \
- emacsy="(XHEIGHT - e_vextra)/e_lineht"
+ emacsx=$(( ecols*e_colchars + e_cextra )) \
+ emacsy=$(( (XHEIGHT - e_vextra)/e_lineht ))
start-emacs () {
GDK_NATIVE_WINDOWS=1 run bgclients noip \
- $emacs -geometry ${emacsx}x${emacsy}+0+0
+ $emacs -bg black -geometry ${emacsx}x${emacsy}+${XSCR0_X}+${XSCR0_Y}
}
## Now place some xterms.
start-xterms () {
## Initialize some parameters.
- declare -i x="ecols * e_colwd + e_hextra" xb=xbound
- declare -i n=0 pgx=0 l h y ht
- declare -i hstd="35 * t_lineht + t_vextra" hmin="25 * t_lineht + t_vextra"
+ declare -i x=$(( ecols*e_colwd + e_hextra + XSCR0_X )) xb=xbound
+ declare -i n=0 pgx=0 l h y ht scr=0 ll=lim
+ declare -i hstd=$(( 35*t_lineht + t_vextra ))
+ declare -i hmin=$(( 25*t_lineht + t_vextra ))
+ declare -i scrx scry scrwd scrht
+
+ eval "scrx=\$XSCR${scr}_X scry=\$XSCR${scr}_Y
+ scrwd=\$XSCR${scr}_WIDTH scrht=\$XSCR${scr}_HEIGHT"
## Do the placement.
while :; do
## Start a new iteration.
- if ((x + t_wd > xb)); then
- if ((n >= 3)); then break; fi
- x="pgx + XWIDTH" pgx="pgx + XWIDTH" xb="xb + XWIDTH"
+ if (( x + t_wd > ll )); then
+ scr=$(( scr + 1 ))
+ if (( scr >= XNSCR )); then
+ if (( n >= 3 )); then break; fi
+ pgx=$(( pgx + XWIDTH )) xb=$(( xb + XWIDTH ))
+ scr=0
+ fi
+ eval "scrx=\$XSCR${scr}_X scry=\$XSCR${scr}_Y
+ scrwd=\$XSCR${scr}_WIDTH scrht=\$XSCR${scr}_HEIGHT"
+ x=$(( pgx + scrx ))
+ ll=$(( x + scrwd ))
+ if (( ll > xb )); then ll=xb; fi
fi
## Make large xterms.
- y=0 ht=XHEIGHT
- while ((ht - hstd >= hmin)); do
+ y=scry ht=scrht
+ while (( ht - hstd >= hmin )); do
run bgclients $term $geom 80x35+$x+$y
- y="y + hstd" ht="ht - hstd" n="n + 1"
+ y=$(( y + hstd )) ht=$(( ht - hstd )) n=$(( n + 1 ))
done
## Fill the remaining space.
- if ((ht >= 2 * hmin)); then h="ht - hmin"; else h=ht; fi
- l="(h - t_vextra)/t_lineht" h="l * t_lineht + t_vextra"
+ if (( ht >= 2*hmin )); then h=$(( ht - hmin )); else h=ht; fi
+ l=$(( (h - t_vextra)/t_lineht )) h=$(( l*t_lineht + t_vextra ))
run bgclients $term $geom 80x$l+$x+$y
- y="y + h" ht="ht - h" n="n + 1"
+ y=$(( y + h )) ht=$(( ht - h )) n=$(( n + 1 ))
if ((ht >= hmin)); then
run bgclients $term $geom 80x25+$x+$y
- n="n + 1"
+ n=$(( n + 1 ))
fi
- x="x + t_wd"
+ x=$(( x + t_wd ))
done
}
~mdw / profile / blobdiff