--- /dev/null
+//!Mup-Arkkra
+// This is a Mup input file template.
+// Lines starting with // are "comments" that are here for your benefit.
+// You can remove them without affecting the output.
+
+/////////////////////////////////////////////////////////////////////////
+// things to go on the top of the first page
+top
+
+ // centered title.
+ // The number in parentheses is the text point size.
+ // Make it bigger if you want a bigger title or smaller if you
+ // want a smaller title
+ title (18) "Replace this with the title of your song"
+
+ // subtitle
+ // If you want a subtitle, remove the // from the beginning
+ // of the next line and fill in the appropriate subtitle text
+ // title (14) "Replace this with the subtitle"
+
+ // composer info
+ // The first pair of double quotes enclose what to left justify,
+ // the second encloses what to right justify.
+ // If you want more than one line, add similar lines of input
+ title "" "Replace this with composer info"
+
+
+/////////////////////////////////////////////////////////////////////////
+// things to go on the bottom on the first page
+bottom
+ // If you want a copyright notice, remove the //
+ // from the next line and edit in the appropriate information
+ // title "\(copyright) Copyright Replace this with year and name"
+
+
+/////////////////////////////////////////////////////////////////////////
+// things to go on the top of pages other than the first
+top2
+ // This example will give a centered page number between dashes.
+ // You can customize as you wish.
+ title "- \% -"
+
+
+/////////////////////////////////////////////////////////////////////////
+// things to go at the bottom of pages other than the first
+bottom2
+ // if you want things printed at the bottom of pages of than
+ // the first page, place them here
+
+
+/////////////////////////////////////////////////////////////////////////
+// score-wide parameters
+//
+// You may or may not need to change some items in this section
+//
+// The values given as examples are the default values that Mup uses
+// if you don't specify anything for them
+score
+ // time signature. Can be cut, com,
+ // or two numbers with a / between them
+ time = 4/4
+
+ // key signature. Value is a number from 0 to 7
+ // followed by # or & for number of sharps or flats.
+ key = 0#
+
+ // how many staffs. Can be a number from 1 to 40
+ staffs = 1
+
+ // clef. Can be treble, treble8, 8treble, frenchviolin,
+ // soprano, mezzosoprano, alto, tenor, baritone, or bass
+ clef = treble
+
+ // Note: there are many more parameters that can be set,
+ // but they are not included in this simple template.
+ // There are parameters to set margins, control how things
+ // are laid out on the page, transpositions value, font and size
+ // for text and lyrics, etc
+
+
+/////////////////////////////////////////////////////////////////////////
+// You can set some parameters for specific staffs,
+// to override the score-wide parameters. For example,
+// if you specify staffs = 2 in the score-wide parameters above,
+// and want to use bass clef on staff 2, even though the score-wide
+// clef parameter is set to treble, you can do
+// staff 2
+// clef = bass
+
+
+/////////////////////////////////////////////////////////////////////////
+// music input starts here
+music
+
+
+// For each measure, you enter one line of input for each staff,
+// then indicate what kind of barline to print.
+// The following specifies that staff 1 contains a measure of rest
+// and that an ordinary bar line is to be used at the end of the measure.
+
+1: mr;
+bar
+
+// Usually, a measure of input for one staff consists of one or more chords
+// Each chord is specified by
+// time_value notes ;
+// where time_value is something like
+// 4 for a quarter note
+// 8 for an eighth note
+// 4. for a dotted-quarter note
+// etc and notes is a list of one or more notes, specified as a pitch from
+// a to g, optionally followed by an accidental (#, &, x, &&, or n for sharp,
+// flat, double sharp, double flat, or natural respectively).
+// Examples:
+// 4c;
+// 2. ceg;
+// 16 f#;
+// 1 d b&;
+// (Spaces are optional, you can put them in if you want, but don't have to)
+//
+// So a complete measure might look something like:
+// 1: 4e; 4d; 2c;
+// bar
+//
+// If you want a note in a different octave than the default octave
+// (the octave from middle-C up for treble clef,
+// or the octave below middle-C for bass clef),
+// you can add a + for each octave to go up or - for each octave to go down.
+// For example:
+// 1: c+; gc+e+; a&-; f#---;
+//
+// There are many other things you can specify, such as ties, slurs, grace
+// notes, etc, and there are also many shortcuts you can use to save typing.
+// Consult the Mup documentation for more details.
+
+// Other bar types you may want to use are
+// repeatstart
+// repeatend
+// repeatboth
+// dblbar
+// endbar
+// invisbar