X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~mdw/git/exim-config/blobdiff_plain/fa5a92c6b7847f6bafbc97d63a3935db4f175e35..31c922203e7c08f64c983044985d31d3470db13f:/base.m4

diff --git a/base.m4 b/base.m4
index 6c2dc7b..1c9dacf 100644
--- a/base.m4
+++ b/base.m4
@@ -26,6 +26,7 @@
 
 SECTION(global, priv)m4_dnl
 admin_groups = CONF_admin_groups
+trusted_groups = CONF_trusted_groups
 prod_requires_admin = false
 
 SECTION(global, logging)m4_dnl
@@ -39,7 +40,7 @@ syslog_timestamp = false
 
 SECTION(global, daemon)m4_dnl
 local_interfaces = <; CONF_interfaces
-extra_local_interfaces = <; 0.0.0.0 ; ::
+extra_local_interfaces = <; 0.0.0.0 ; ::0
 
 SECTION(global, resource)m4_dnl
 deliver_queue_load_max = 8
@@ -89,7 +90,7 @@ SECTION(global, bounce)m4_dnl
 delay_warning = 1h : 24h : 2d
 
 SECTION(global, tls)m4_dnl
-tls_certificate = CONF_sysconf_dir/server.cert
+tls_certificate = CONF_sysconf_dir/server.certlist
 tls_privatekey = CONF_sysconf_dir/server.key
 tls_advertise_hosts = ${if exists {CONF_sysconf_dir/server.key} {*}{}}
 tls_dhparam = CONF_ca_dir/dh-param-2048.pem
@@ -128,7 +129,7 @@ helo:
 				       {CONF_sysconf_dir/helo.conf} \
 				       {${if match_ip \
 					     {$sender_host_address} \
-					     {$value}}}}}}
+					     {<; $value}}}}}}
 		!verify = helo
 		 set acl_c_helo_warning = true
 
@@ -161,11 +162,8 @@ mail:
 	## Always allow the empty sender, so that we can receive bounces.
 	accept	 senders = :
 
-	## Ensure that the sender is routable.  This is important to prevent
-	## undeliverable bounces.
-	require	 message = Invalid sender; \
-			($sender_verify_failure; $acl_verify_message)
-		 verify = sender
+	## Ensure that the sender looks valid.
+	require	 acl = mail_check_sender
 
 	## If this is directly from a client then hack on it for a while.
 	warn	 condition = ${if eq{$acl_c_mode}{submission}}
@@ -184,6 +182,23 @@ SECTION(acl, mail-tail)m4_dnl
 	## And we're done.
 	accept
 
+SECTION(acl, misc)m4_dnl
+mail_check_sender:
+
+	## See whether there's a special exception for this sender domain.
+	accept	 senders = ${LOOKUP_DOMAIN($sender_address_domain,
+			     {KV(senders, {$value}{})},
+			     {})}
+
+	## Ensure that the sender is routable.  This is important to prevent
+	## undeliverable bounces.
+	require	 message = Invalid sender; \
+			($sender_verify_failure; $acl_verify_message)
+		 verify = sender
+
+	## We're good, then.
+	accept
+
 SECTION(global, acl)m4_dnl
 acl_smtp_connect = connect
 SECTION(acl, connect)m4_dnl
@@ -214,16 +229,35 @@ rcpt:
 
 	## Reject if the client isn't allowed to relay and the recipient
 	## isn't in one of our known domains.
-	deny	 message = Relaying not permitted
-		!hosts = CONF_relay_clients
-		!authenticated = *
-		!domains = +known
+	require	 message = Relaying not permitted
+		 acl = check_relay
 
 	## Ensure that the recipient is routable.
 	require	 message = Invalid recipient \
 			($recipient_verify_failure; $acl_verify_message)
 		 verify = recipient
 
+SECTION(acl, misc)m4_dnl
+check_relay:
+	## Accept either if the client is allowed to relay through us, or if
+	## we're the correct place to send this mail.
+
+	## Known clients and authenticated users are OK.
+	accept	  hosts = CONF_relay_clients
+	accept	  authenticated = *
+
+	## Known domains are OK.
+	accept	  domains = +public
+
+	## Finally, domains in our table are OK, unless they say they aren't.
+	accept	  domains = \
+		${if exists{CONF_sysconf_dir/domains.conf} \
+		     {partial0-lsearch;	CONF_sysconf_dir/domains.conf}}
+		  condition = DOMKV(service, {$value}{true})
+
+	## Nope, that's not allowed.
+	deny
+
 SECTION(acl, rcpt-tail)m4_dnl
 	## Everything checks out OK: let this one go through.
 	accept
@@ -239,7 +273,7 @@ SECTION(acl, data-tail)m4_dnl
 SECTION(global, acl)m4_dnl
 acl_smtp_expn = expn_vrfy
 acl_smtp_vrfy = expn_vrfy
-SECTION(acl)m4_dnl
+SECTION(acl, misc)m4_dnl
 expn_vrfy:
 	accept	 hosts = +trusted
 	deny	 message = Suck it and see
@@ -260,16 +294,25 @@ mail_check_auth:
 	warn	 set acl_c_user = $authenticated_id
 		 hosts = +thishost
 		!authenticated = *
+		 condition = ${if def:sender_ident}
 		 set acl_c_user = $sender_ident
 
-	## User must be authenticated.
+	## User must be authenticated by now.
 	deny	 message = Sender not authenticated
-		!hosts = +thishost
-		!authenticated = *
+		 condition = ${if !def:acl_c_user}
 
 	## Make sure that the local part is one that the authenticated sender
 	## is allowed to claim.
 	deny	 message = Sender address forbidden to calling user
+		!condition = \
+			${if exists {CONF_sysconf_dir/auth-sender.conf} \
+			     {${lookup {$acl_c_user} \
+				       lsearch \
+				       {CONF_sysconf_dir/auth-sender.conf} \
+				       {${if match_address \
+					     {$sender_address} \
+					     {+value}}} \
+				       {false}}}}
 		!condition = ${LOOKUP_DOMAIN($sender_address_domain,
 			       {${if and {{match_local_part \
 					    {$acl_c_user} \
@@ -348,10 +391,21 @@ SECTION(transports)m4_dnl
 ## A standard transport for remote delivery.  By default, try to do TLS, and
 ## don't worry too much if it's not very secure: the alternative is sending
 ## in plaintext anyway.  But all of this can be overridden from the
-## `domains.conf' file.
+## `domains.conf' file.  Annoyingly, the `tls_dh_min_bits' setting isn't
+## expanded before use, so we can't set it the obvious way.  Instead, encode
+## it into the transport name.  This is very unpleasant, of course.
 smtp:
 	driver = smtp
+	tls_require_ciphers = CONF_acceptable_ciphers
+	tls_dh_min_bits = 1020
+	tls_tempfail_tryclear = true
+
+m4_define(<:SMTP_TRANS_DHBITS:>,
+	<:driver = smtp
+	hosts_try_auth = *
 	hosts_require_tls = DOMKV(tls-peer-ca, {*}{})
+	hosts_require_auth = \
+		${if bool {DOMKV(require-auth, {$value}{false})} {*}{}}
 	tls_certificate = DOMKV(tls-certificate, {${expand:$value}}fail)
 	tls_privatekey = DOMKV(tls-private-key, {${expand:$value}}fail)
 	tls_verify_certificates = DOMKV(tls-peer-ca, {${expand:$value}}fail)
@@ -363,17 +417,19 @@ smtp:
 				 {$value} \
 				 {${expand:$value}}}} \
 		      {CONF_acceptable_ciphers})
-	## Can't set this to an expansion. :-(
-	m4_dnl tls_dh_min_bits = DOMKV(dh-min-bits, {$value}{1020})
-	tls_dh_min_bits = 1020
-	tls_tempfail_tryclear = true
+	tls_dh_min_bits = $1
+	tls_tempfail_tryclear = true:>)m4_dnl
+smtp_dhbits_1024:
+	SMTP_TRANS_DHBITS(1020)
+smtp_dhbits_2048:
+	SMTP_TRANS_DHBITS(2046)
 
 ## Transport to a local SMTP server; use TLS and perform client
 ## authentication.
 smtp_local:
 	driver = smtp
 	hosts_require_tls = *
-	tls_certificate = CONF_sysconf_dir/client.cert
+	tls_certificate = CONF_sysconf_dir/client.certlist
 	tls_privatekey = CONF_sysconf_dir/client.key
 	tls_verify_certificates = CONF_ca_dir/ca.cert
 	tls_require_ciphers = CONF_good_ciphers