SECTION(global, priv)m4_dnl
admin_groups = CONF_admin_groups
+trusted_groups = CONF_trusted_groups
prod_requires_admin = false
SECTION(global, logging)m4_dnl
SECTION(global, daemon)m4_dnl
local_interfaces = <; CONF_interfaces
-extra_local_interfaces = <; 0.0.0.0 ; ::
+extra_local_interfaces = <; 0.0.0.0 ; ::0
SECTION(global, resource)m4_dnl
deliver_queue_load_max = 8
SECTION(global, incoming)m4_dnl
received_header_text = Received: \
${if def:sender_rcvhost \
- {from $sender_rcvhost\
- ${if def:sender_helo_name \
- { (helo=$sender_helo_name)}}\n\t} \
+ {from $sender_rcvhost\n\t} \
{${if def:sender_ident \
{from ${quote_local_part:$sender_ident} }}}}\
by $primary_hostname \
${if def:sender_address \
{(envelope-from $sender_address\
${if def:authenticated_id \
- {; auth=$authenticated_id}})\n\t}}\
+ {; auth=${quote_local_part:$authenticated_id}} \
+ {${if and {{def:authenticated_sender} \
+ {match_address{$authenticated_sender} \
+ {*@CONF_master_domain}}} \
+ {; auth=${quote_local_part:\
+ ${local_part:\
+ $authenticated_sender}}}}}})\n\t}}\
id $message_exim_id\
${if def:received_for {\n\tfor $received_for}}
smtp_return_error_details = true
accept_8bitmime = true
+SECTION(global, env)m4_dnl
+keep_environment =
+
SECTION(global, process)m4_dnl
extract_addresses_remove_arguments = false
headers_charset = utf-8
qualify_domain = CONF_master_domain
+untrusted_set_sender = *
+local_from_check = false
+local_sender_retain = true
SECTION(global, bounce)m4_dnl
delay_warning = 1h : 24h : 2d
+SECTION(global, tls)m4_dnl
+tls_certificate = CONF_sysconf_dir/server.certlist
+tls_privatekey = CONF_sysconf_dir/server.key
+tls_advertise_hosts = ${if exists {CONF_sysconf_dir/server.key} {*}{}}
+tls_dhparam = CONF_ca_dir/dh-param-2048.pem
+tls_require_ciphers = ${if or {{={$received_port}{CONF_submission_port}} \
+ {match_ip {$sender_host_address}{+trusted}}} \
+ {CONF_good_ciphers} \
+ {CONF_acceptable_ciphers}}
+tls_verify_certificates = CONF_ca_dir/ca.cert
+tls_verify_hosts = ${if eq{$acl_c_mode}{submission} {} {+allnets}}
+
DIVERT(null)
###--------------------------------------------------------------------------
### Access control lists.
## Also, we're liable to get a subsequent HELO (e.g., after STARTTLS)
## and we should only care about the most recent one.
warn set acl_c_helo_warning = false
+ !condition = \
+ ${if and {{match_ip {$sender_host_address} \
+ {<; 127.0.0.0/8 ; ::1}} \
+ {match_domain {$sender_helo_name} \
+ {localhost : +thishost}}}}
!condition = \
${if exists {CONF_sysconf_dir/helo.conf} \
{${lookup {$sender_helo_name} \
{CONF_sysconf_dir/helo.conf} \
{${if match_ip \
{$sender_host_address} \
- {$value}}}}}}
+ {<; $value}}}}}}
!verify = helo
set acl_c_helo_warning = true
accept
+SECTION(global, acl)m4_dnl
+acl_not_smtp_start = not_smtp_start
+SECTION(acl, misc)m4_dnl
+not_smtp_start:
+ ## Record the user's name.
+ warn set acl_c_user = $sender_ident
+ set acl_m_user = $sender_ident
+
+ ## Done.
+ accept
+
SECTION(global, acl)m4_dnl
acl_smtp_mail = mail
SECTION(acl, mail)m4_dnl
mail:
## If we stashed a warning header about HELO from earlier, we should
- ## add it now.
+ ## add it now. Only don't bother if the client has authenticated
+ ## successfully for submission (because we can't expect mobile
+ ## clients to be properly set up knowing their names), or it's one of
+ ## our own satellites (because they're either properly set up anyway,
+ ## or satellites using us as a smarthost).
warn condition = $acl_c_helo_warning
- add_header = :after_received:X-Distorted-Warning: \
- BADHELO \
- Client's HELO doesn't match its IP address.\n\t\
- HELO name = $sender_helo_name, \
- address = $sender_host_address
+ !condition = ${if eq{$acl_c_mode}{submission}}
+ !hosts = +allnets
+ WARNING_HEADER(BADHELO,
+ <:Client's HELO doesn't match its IP address.\n\t\
+ helo-name=$sender_helo_name \
+ address=$sender_host_address:>)
## Always allow the empty sender, so that we can receive bounces.
accept senders = :
- ## Ensure that the sender is routable. This is important to prevent
- ## undeliverable bounces.
- require message = Invalid sender; \
- ($sender_verify_failure; $acl_verify_message)
- verify = sender
+ ## Ensure that the sender looks valid.
+ require acl = mail_check_sender
## If this is directly from a client then hack on it for a while.
warn condition = ${if eq{$acl_c_mode}{submission}}
- control = submission
+ control = submission/sender_retain
+
+ ## Insist that a local client connect through TLS.
+ deny message = Hosts within CONF_master_domain must use TLS
+ !condition = ${if eq{$acl_c_mode}{submission}}
+ hosts = +allnets
+ !encrypted = *
+
+ ## Check that a submitted message's sender address is allowable.
+ require acl = mail_check_auth
SECTION(acl, mail-tail)m4_dnl
## And we're done.
accept
+SECTION(acl, misc)m4_dnl
+mail_check_sender:
+
+ ## See whether there's a special exception for this sender domain.
+ accept senders = ${LOOKUP_DOMAIN($sender_address_domain,
+ {KV(senders, {$value}{})},
+ {})}
+
+ ## Ensure that the sender is routable. This is important to prevent
+ ## undeliverable bounces.
+ require message = Invalid sender; \
+ ($sender_verify_failure; $acl_verify_message)
+ verify = sender
+
+ ## We're good, then.
+ accept
+
SECTION(global, acl)m4_dnl
acl_smtp_connect = connect
SECTION(acl, connect)m4_dnl
check_submission:
## See whether this message needs hacking on.
- accept !hosts = +localnet
+ accept !hosts = +thishost
!condition = ${if ={$received_port}{CONF_submission_port}}
set acl_c_mode = relay
## Reject if the client isn't allowed to relay and the recipient
## isn't in one of our known domains.
- deny message = Relaying not permitted
- !hosts = CONF_relay_clients
- !authenticated = *
- !domains = +known
+ require message = Relaying not permitted
+ acl = check_relay
## Ensure that the recipient is routable.
require message = Invalid recipient \
($recipient_verify_failure; $acl_verify_message)
verify = recipient
+SECTION(acl, misc)m4_dnl
+check_relay:
+ ## Accept either if the client is allowed to relay through us, or if
+ ## we're the correct place to send this mail.
+
+ ## Known clients and authenticated users are OK.
+ accept hosts = CONF_relay_clients
+ accept authenticated = *
+
+ ## Known domains are OK.
+ accept domains = +public
+
+ ## Finally, domains in our table are OK, unless they say they aren't.
+ accept domains = \
+ ${if exists{CONF_sysconf_dir/domains.conf} \
+ {partial0-lsearch; CONF_sysconf_dir/domains.conf}}
+ condition = DOMKV(service, {$value}{true})
+
+ ## Nope, that's not allowed.
+ deny
+
SECTION(acl, rcpt-tail)m4_dnl
## Everything checks out OK: let this one go through.
accept
SECTION(global, acl)m4_dnl
acl_smtp_expn = expn_vrfy
acl_smtp_vrfy = expn_vrfy
-SECTION(acl)m4_dnl
+SECTION(acl, misc)m4_dnl
expn_vrfy:
accept hosts = +trusted
deny message = Suck it and see
+DIVERT(null)
+###--------------------------------------------------------------------------
+### Verification of sender address.
+
+SECTION(acl, misc)m4_dnl
+mail_check_auth:
+
+ ## If this isn't a submission then it doesn't need checking.
+ accept condition = ${if !eq{$acl_c_mode}{submission}}
+
+ ## If the caller hasn't formally authenticated, but this is a
+ ## loopback connection, then we can trust identd to tell us the right
+ ## answer. So we should stash the right name somewhere consistent.
+ warn set acl_c_user = $authenticated_id
+ hosts = +thishost
+ !authenticated = *
+ condition = ${if def:sender_ident}
+ set acl_c_user = $sender_ident
+
+ ## User must be authenticated by now.
+ deny message = Sender not authenticated
+ condition = ${if !def:acl_c_user}
+
+ ## Set the per-message authentication flag, since we now know that
+ ## there's a sensible value.
+ warn set acl_m_user = $acl_c_user
+
+ ## All done.
+ accept
+
DIVERT(null)
###--------------------------------------------------------------------------
### Common options for forwarding routers.
## Transports for redirection filters.
m4_define(<:FILTER_TRANSPORTS:>,
- <:verify = false
- file_transport = mailbox
+ <:file_transport = mailbox
directory_transport = maildir
pipe_transport = pipe
reply_transport = reply:>)
+m4_define(<:FILTER_ROUTER:>,
+<:$1_vrf:
+ $2
+ FILTER_VERIFY<::>$3
+$1:
+ $2
+ verify = no
+ FILTER_TRANSPORTS<::>$4:>)
+
+DIVERT(null)
+###--------------------------------------------------------------------------
+### Common routers.
+
+SECTION(routers, alias)m4_dnl
+## Look up the local part in the address map.
+alias:
+ driver = redirect
+ allow_fail = true
+ allow_defer = true
+ user = CONF_filter_user
+ FILTER_TRANSPORTS
+ local_parts = nwildlsearch; CONF_alias_file
+ data = ${expand:$local_part_data}
+SECTION(routers, alias-opts)m4_dnl
+
DIVERT(null)
###--------------------------------------------------------------------------
### Some standard transports.
envelope_to_add = true
return_path_add = true:>)
+m4_define(<:APPLY_HEADER_CHANGES:>,
+ <:headers_add = m4_ifelse(<:$1:>, <::>,
+ <:$acl_m_hdradd:>,
+ <:${if def:acl_m_hdradd{$acl_m_hdradd\n}}\
+ $1:>)
+ headers_remove = m4_ifelse(<:$2:>, <::>,
+ <:$acl_m_hdrrm:>,
+ <:${if def:acl_m_hdrrm{$acl_m_hdrrm:}}\
+ $2:>):>)
+
SECTION(transports)m4_dnl
-## A standard transport for remote delivery. Try to do TLS, and don't worry
-## too much if it's not very secure: the alternative is sending in plaintext
-## anyway.
+## A standard transport for remote delivery. By default, try to do TLS, and
+## don't worry too much if it's not very secure: the alternative is sending
+## in plaintext anyway. But all of this can be overridden from the
+## `domains.conf' file. Annoyingly, the `tls_dh_min_bits' setting isn't
+## expanded before use, so we can't set it the obvious way. Instead, encode
+## it into the transport name. This is very unpleasant, of course.
smtp:
driver = smtp
+ APPLY_HEADER_CHANGES
tls_require_ciphers = CONF_acceptable_ciphers
- tls_dh_min_bits = 1020
+ tls_dh_min_bits = 508
tls_tempfail_tryclear = true
+m4_define(<:SMTP_TRANS_DHBITS:>,
+ <:driver = smtp
+ APPLY_HEADER_CHANGES
+ hosts_try_auth = *
+ hosts_require_tls = DOMKV(tls-peer-ca, {*}{})
+ hosts_require_auth = \
+ ${if bool {DOMKV(require-auth, {$value}{false})} {*}{}}
+ tls_certificate = DOMKV(tls-certificate, {${expand:$value}}fail)
+ tls_privatekey = DOMKV(tls-private-key, {${expand:$value}}fail)
+ tls_verify_certificates = DOMKV(tls-peer-ca, {${expand:$value}}fail)
+ tls_require_ciphers = \
+ DOMKV(tls-ciphers,
+ {${extract {${expand:$value}} \
+ { good = CONF_good_ciphers \
+ any = CONF_acceptable_ciphers } \
+ {$value} \
+ {${expand:$value}}}} \
+ {CONF_acceptable_ciphers})
+ tls_dh_min_bits = $1
+ tls_tempfail_tryclear = true:>)m4_dnl
+smtp_dhbits_512:
+ SMTP_TRANS_DHBITS(508)
+smtp_dhbits_768:
+ SMTP_TRANS_DHBITS(764)
+smtp_dhbits_1024:
+ SMTP_TRANS_DHBITS(1020)
+smtp_dhbits_2048:
+ SMTP_TRANS_DHBITS(2044)
+
## Transport to a local SMTP server; use TLS and perform client
## authentication.
smtp_local:
driver = smtp
+ APPLY_HEADER_CHANGES
hosts_require_tls = *
- tls_certificate = CONF_sysconf_dir/client.cert
+ tls_certificate = CONF_sysconf_dir/client.certlist
tls_privatekey = CONF_sysconf_dir/client.key
tls_verify_certificates = CONF_ca_dir/ca.cert
tls_require_ciphers = CONF_good_ciphers
tls_dh_min_bits = 2046
tls_tempfail_tryclear = false
- authenticated_sender = ${if def:authenticated_id \
- {$authenticated_id@CONF_master_domain} \
- fail}
+ authenticated_sender_force = true
+ authenticated_sender = \
+ ${if def:acl_m_user {$acl_m_user@CONF_master_domain} \
+ {${if def:authenticated_sender {$authenticated_sender} \
+ fail}}}
## A standard transport for local delivery.
deliver:
driver = appendfile
+ APPLY_HEADER_CHANGES
file = /var/mail/$local_part
group = mail
mode = 0600
## Transports for user filters.
mailbox:
driver = appendfile
+ APPLY_HEADER_CHANGES
initgroups = true
USER_DELIVERY
maildir:
driver = appendfile
+ APPLY_HEADER_CHANGES
maildir_format = true
initgroups = true
USER_DELIVERY
pipe:
driver = pipe
+ APPLY_HEADER_CHANGES
path = ${if and {{def:home} {exists{$home/bin}}} {$home/bin:} {}}\
/usr/local/bin:/usr/local/sbin:\
/usr/bin:/usr/sbin:/bin:/sbin