chiark / gitweb /
Start on 'settings' window. Currently disabled as it's not very
[disorder] / README.streams
index 4e6e42510fb8f2e199ea0b8978ccdbf26c929e64..8fbe6c7ce566ec5cfaaea906d61d8df0151d815b 100644 (file)
@@ -1,5 +1,139 @@
-DisOrder and Internet Streams
-=============================
+* Introduction
+
+This file describes DisOrder's relationship to several different things that
+get called 'streams'.
+
+* RTP Streaming
+
+DisOrder is capable to transmitting RTP streams over a suitable network.
+
+** Server Setup
+
+To enable this make sure that all players use the speaker process, i.e. execraw
+rather than exec (or it won't work properly) and configure the network speaker
+backend:
+
+    api network
+    broadcast 172.17.207.255 9003
+    broadcast_from 172.17.207.2 9002
+
+The destination address (broadcast) can be:
+   - a broadcast address for a local network
+   - a multicast address
+
+The source address (broadcast_from) is optional but may be convenient in some
+cases.
+
+If the destination is a multicast address then you should set the TTL, for
+instance:
+
+   multicast_ttl 10
+
+(The destination can also be a unicast address but that's not a tested
+configuration.)
+
+** Playing The Stream
+
+To play, use the disorder-playrtp client.  If the destination address was a
+unicast or broadcast address then:
+
+   disorder-playrtp 9003
+
+If the destination address was a multicast address then you must specify that,
+for instance:
+
+   disorder-playrtp 224.2.3.4 9003
+
+If the client machine has a DisOrder configuration file allowing disorder(1) to
+connect to the server then the parameters are unnecessary: disorder-playrtp
+will figure out the details automatically.
+
+** Disobedience
+
+Disobedience is capable of running disorder-playrtp in the background (provided
+it is installed); look for the speaker icon.  If it detects that the server is
+using network play then its volume control will apply to the local volume, not
+the server's volume.
+
+If you run into trouble look for *.log files in the ~/.disorder directory.
+
+** Limitations
+
+Currently only 16-bit 44100Hz stereo is supported, which requires about
+1.4Mbit/s.  At the time of writing I've found this to work fine on 100Mbit/s
+ethernet and had reports of success with 10Mbit/s ethernet, but have not had
+any success with wireless.
+
+Possibly other lower-quality but lower-bandwidth encodings will be supported in
+future.
+
+If you have a very recent version of sox you may need to set the sox_generation
+option.  See disorder_config(5).
+
+
+* Icecast Streaming
+
+This can be achieved using the speaker_command option and Icecast (see
+http://www.icecast.org/).  It will only work if you use the speaker process,
+i.e. execraw for everything.
+
+I used:
+
+  speaker_command "ices2 /etc/disorder/ices.xml"
+
+where ices.xml is:
+
+  <?xml version="1.0"?>
+  <ices>
+      <background>0</background>
+      <logpath>/var/log/ices</logpath>
+      <logfile>disorder.log</logfile>
+      <loglevel>4</loglevel>
+      <consolelog>0</consolelog>
+      <stream>
+          <metadata>
+              <name>lyonesse</name>
+              <genre>Various</genre>
+              <description>lyonesse disorder output</description>
+          </metadata>
+          <input>
+              <module>stdinpcm</module>
+              <param name="rate">44100</param>
+              <param name="channels">2</param>
+              <param name="metadata">1</param>
+              <param name="metadatafilename">/var/disorder/icedata</param>
+          </input>
+          <instance>
+              <hostname>lyonesse.anjou.terraraq.org.uk</hostname>
+              <port>8000</port>
+              <password>SOURCE PASSWORD HERE</password>
+              <mount>/disorder.ogg</mount>
+              <reconnectdelay>2</reconnectdelay>
+              <reconnectattempts>5</reconnectattempts>
+              <maxqueuelength>80</maxqueuelength>
+              <encode>
+                  <nominal-bitrate>64000</nominal-bitrate>
+                  <samplerate>44100</samplerate>
+                  <channels>2</channels>
+                  <flush-samples>8820</flush-samples>
+              </encode>
+          </instance>
+      </stream>
+  </ices>
+
+This doesn't seem to get on very well with pausing but you're unlikely to want
+to pause a stream in any case.  I used IceCast 2.3.1 and Ices 2.0.1.  You can
+play the stream with XMMS or whatever.  The total setup seems to play rather
+behind the 'current' time, watch this space for a fix (or contribute one!)
+
+If you have a too-recent version of sox you may need to set the sox_generation
+option.
+
+Mark Wooding contributed the original support for this but it's been modified
+enough that he probably shouldn't be blamed for any bugs in the current code.
+
+
+* DisOrder and Republishing Internet Streams
 
 DisOrder doesn't have any built-in support for playing streams but you can make
 it do so.  I use the following in my configuration file:
 
 DisOrder doesn't have any built-in support for playing streams but you can make
 it do so.  I use the following in my configuration file:
@@ -25,8 +159,8 @@ You can then queue a stream like any other track.  It won't automatically
 interrupt the playing track, you have to scratch it manually.  Go back to
 normal play by scratching the stream.
 
 interrupt the playing track, you have to scratch it manually.  Go back to
 normal play by scratching the stream.
 
+
 Local Variables:
 Local Variables:
-mode:text
+mode:outline
 fill-column:79
 End:
 fill-column:79
 End:
-arch-tag:ae95108d51c55288c4f6da4102343cd5