Correct documentation for 'revoke'.

[disorder] / doc / disorder_protocol.5.in

.\"
.\" Copyright (C) 2004-2008 Richard Kettlewell
.\"
.\" This program is free software: you can redistribute it and/or modify
.\" it under the terms of the GNU General Public License as published by
.\" the Free Software Foundation, either version 3 of the License, or
.\" (at your option) any later version.
.\" 
.\" This program is distributed in the hope that it will be useful,
.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
.\" GNU General Public License for more details.
.\" 
.\" You should have received a copy of the GNU General Public License
.\" along with this program.  If not, see <http://www.gnu.org/licenses/>.
.\"
.TH disorder_protocol 5
.SH NAME
disorder_protocol \- DisOrder communication protocol
.SH DESCRIPTION
The DisOrder client and server communicate via the protocol described
in this man page.
.PP
The protocol is liable to change without notice.
You are recommended to check the implementation before believing this document.
.SH "GENERAL SYNTAX"
Everything is encoded using UTF-8.
See
.B "CHARACTER ENCODING"
below for more detail on character encoding issues.
.PP
Commands and responses consist of a line perhaps followed (depending on the
command or response) by a body.
.PP
The line syntax is the same as described in \fBdisorder_config\fR(5) except
that comments are prohibited.
.PP
Bodies borrow their syntax from RFC821; they consist of zero or more ordinary
lines, with any initial full stop doubled up, and are terminated by a line
consisting of a full stop and a line feed.
.PP
Commands only have a body if explicitly stated below.
If they do have a body then the body should always be sent immediately;
unlike (for instance) the SMTP "DATA" command there is no intermediate step
where the server asks for the body to be sent.
.PP
Replies also only have a body if stated below.
The presence of a reply body can always be inferred from the response code;
if the last digit is a 3 then a body is present, otherwise it is not.
.SH COMMANDS
Commands always have a command name as the first field of the line; responses
always have a 3-digit response code as the first field.
See below for more details about this field.
.PP
All commands require the connection to have been already authenticated unless
stated otherwise.
If not stated otherwise, the \fBread\fR right is sufficient to execute
the command.
.TP
.B adduser \fIUSERNAME PASSWORD \fR[\fIRIGHTS\fR]
Create a new user with the given username and password.
The new user's rights list can be specified; if it is not
then the \fBdefault_rights\fR setting applies instead.
Requires the \fBadmin\fR right, and only works on local
connections.
.TP
.B adopt \fIID\fR
Adopts a randomly picked track, leaving it in a similar state to if it was
picked by this user.  Requires the \fBplay\fR right.
.TP
.B allfiles \fIDIRECTORY\fR [\fIREGEXP\fR]
List all the files and directories in \fIDIRECTORY\fR in a response body.
If \fIREGEXP\fR is present only matching files and directories are returned.
.TP
.B confirm \fICONFIRMATION
Confirm user registration.
\fICONFIRMATION\fR is as returned from \fBregister\fR below.
This command logs the user in.
The response contains the logged-in username.
.TP
.B cookie \fICOOKIE
Log a user back in using a cookie created with \fBmake\-cookie\fR.
The response contains the username.
.TP
.B deluser \fIUSERNAME
Delete the named user.
Requires the \fBadmin\fR right, and only works on local connections.
.TP
.B dirs \fIDIRECTORY\fR [\fIREGEXP\fR]
List all the directories in \fIDIRECTORY\fR in a response body.
If \fIREGEXP\fR is present only matching directories are returned.
.TP
.B disable \fR[\fBnow\fR]
Disable further playing.
If the optional \fBnow\fR argument is present then the current track
is stopped.
Requires the \fBglobal prefs\fR right.
.TP
.B edituser \fIUSERNAME PROPERTY VALUE
Set a user property.
With the \fBadmin\fR right any username and property may be specified.
Otherwise the \fBuserinfo\fR right is required and only the
\fBemail\fR and \fBpassword\fR properties may be set.
.IP
User properties are syntax-checked before setting.  For instance \fBemail\fR
must contain an "@" sign or you will get an error.  (Setting an empty value for
\fBemail\fR is allowed and removes the property.)
.TP
.B enable
Re-enable further playing, and is the opposite of \fBdisable\fR.
Requires the \fBglobal prefs\fR right.
.TP
.B enabled
Report whether playing is enabled.
The second field of the response line will be \fByes\fR or \fBno\fR.
.TP
.B exists \fITRACK\fR
Report whether the named track exists.
The second field of the response line will be \fByes\fR or \fBno\fR.
.TP
.B files \fIDIRECTORY\fR [\fIREGEXP\fR]
List all the files in \fIDIRECTORY\fR in a response body.
If \fIREGEXP\fR is present only matching files are returned.
.TP
.B get \fITRACK\fR \fIPREF\fR
Gets a preference value.
On success the second field of the response line will have the value.
.IP
If the track or preference do not exist then the response code is 555.
.TP
.B get\-global \fIKEY\fR
Get a global preference.
.IP
If the preference does not exist then the response code is 555.
.TP
.B length \fITRACK\fR
Get the length of the track in seconds.
On success the second field of the response line will have the value.
.TP
.B log
Send event log messages in a response body.
The command will never terminate.
Any further data sent to the server will be discarded (explicitly;
i.e. it will not accumulate in a buffer somewhere).
.IP
See \fBEVENT LOG\fR below for more details.
.TP
.B make\-cookie
Returns an opaque string that can be used by the \fBcookie\fR command to log
this user back in on another connection (until the cookie expires).
.TP
.B move \fITRACK\fR \fIDELTA\fR
Move a track in the queue.
The track may be identified by ID (preferred) or name (which might cause
confusion if it's there twice).
\fIDELTA\fR should be an negative or positive integer and indicates how
many steps towards the head of the queue the track should be moved.
.IP
Requires one of the \fBmove mine\fR, \fBmove random\fR or \fBmove any\fR rights
depending on how the track came to be added to the queue.
.TP
.B moveafter \fITARGET\fR \fIID\fR ...
Move all the tracks in the \fIID\fR list after ID \fITARGET\fR.
If \fITARGET\fR is the empty string then the listed tracks are put
at the head of the queue.
If \fITARGET\fR is listed in the ID list then the tracks are moved
to just after the first non-listed track before it, or to the head if there is
no such track.
.IP
Requires one of the \fBmove mine\fR, \fBmove random\fR or \fBmove any\fR rights
depending on how the tracks came to be added to the queue.
.TP
.B new \fR[\fIMAX\fR]
Send the most recently added \fIMAX\fR tracks in a response body.
If the argument is omitted, the \fBnew_max\fR most recent tracks are
listed (see \fBdisorder_config\fR(5)).
.TP
.B nop
Do nothing.
Used by
.BR disobedience (1)
as a keepalive measure.
This command does not require authentication.
.TP
.B part \fITRACK\fR \fICONTEXT\fI \fIPART\fR
Get a track name part.
Returns an empty string if a name part cannot be constructed.
.IP
.I CONTEXT
is one of
.B sort
or
.B display
and
.I PART
is usually one of
.BR artist ,
.B album
or
.BR title .
.TP
.B pause
Pause the current track.
Requires the \fBpause\fR right.
.TP
.B play \fITRACK\fR
Add a track to the queue.
The response contains the queue ID of the track.
Requires the \fBplay\fR right.
.TP
.B playafter \fITARGET\fR \fITRACK\fR ...
Add all the tracks in the \fITRACK\fR list to the queue after \fITARGET\fR
(which should be a track ID).
If \fITARGET\fR is the empty string then the listed tracks are put
at the head of the queue.
.IP
Currently the success result does \fInot\fR include the new track IDs.
.IP
Requires the \fBplay\fR right.
.TP
.B playing
Report what track is playing.
.IP
If the response is \fB252\fR then the rest of the response line consists of
track information (see below).
.IP
If the response is \fB259\fR then nothing is playing.
.TP
.B playlist-delete \fIPLAYLIST\fR
Delete a playlist.
Requires permission to modify that playlist and the \fBplay\fR right.
.TP
.B playlist-get \fIPLAYLIST\fR
Get the contents of a playlist, in a response body.
Requires permission to read that playlist and the \fBread\fR right.
If the playlist does not exist the response is 555.
.TP
.B playlist-get-share \fIPLAYLIST\fR
Get the sharing status of a playlist.
The result will be \fBpublic\fR, \fBprivate\fR or \fBshared\fR.
Requires permission to read that playlist and the \fBread\fR right.
.TP
.B playlist-lock \fIPLAYLIST\fR
Lock a playlist.
Requires permission to modify that playlist and the \fBplay\fR right.
Only one playlist may be locked at a time on a given connection and the lock
automatically expires when the connection is closed.
.TP
.B playlist-set \fIPLAYLIST\fR
Set the contents of a playlist.
The new contents should be supplied in a command body.
Requires permission to modify that playlist and the \fBplay\fR right.
The playlist must be locked.
.TP
.B playlist-set-share \fIPLAYLIST\fR \fISHARE\fR
Set the sharing status of a playlist to
\fBpublic\fR, \fBprivate\fR or \fBshared\fR.
Requires permission to modify that playlist and the \fBplay\fR right.
.TP
.B playlist-unlock\fR
Unlock the locked playlist.
.TP
.B playlists
List all playlists that this connection has permission to read.
Requires the \fBread\fR right.
.TP
.B prefs \fBTRACK\fR
Send back the preferences for \fITRACK\fR in a response body.
Each line of the response has the usual line syntax, the first field being the
name of the pref and the second the value.
.TP
.B queue
Send back the current queue in a response body, one track to a line, the track
at the head of the queue (i.e. next to be be played) first.
See below for the track information syntax.
.TP
.B random\-disable
Disable random play (but don't stop the current track).
Requires the \fBglobal prefs\fR right.
.TP
.B random\-enable
Enable random play.
Requires the \fBglobal prefs\fR right.
.TP
.B random\-enabled
Report whether random play is enabled.
The second field of the response line will be \fByes\fR or \fBno\fR.
.TP
.B recent
Send back the current recently-played list in a response body, one track to a
line, the track most recently played last.
See below for the track information syntax.
.TP
.B reconfigure
Request that DisOrder reconfigure itself.
Requires the \fBadmin\fR right.
.IP
Not all configuration options can be modified during the lifetime of the
server; of those that can't, some will just be ignored if they change while
others will cause the new configuration to be rejected.
See \fBdisorder_config\fR(5) for details.
.TP
.B register \fIUSERNAME PASSWORD EMAIL
Register a new user.
Requires the \fBregister\fR right.
The result contains a confirmation string; the user will be be able
to log in until this has been presented back to the server via the
\fBconfirm\fR command.
.TP
.B reminder \fIUSERNAME\fR
Send a password reminder to user \fIUSERNAME\fR.
If the user has no valid email address, or no password, or a
reminder has been sent too recently, then no reminder will be sent.
.TP
.B remove \fIID\fR
Remove the track identified by \fIID\fR.
Requires one of the \fBremove mine\fR, \fBremove random\fR or
\fBremove any\fR rights depending on how the
track came to be added to the queue.
.TP
.B rescan \fR[\fBwait\fR] \fR[\fBfresh\fR]
Rescan all roots for new or obsolete tracks.
Requires the \fBrescan\fR right.
.IP
If the \fBwait\fR flag is present then the response is delayed until the rescan
completes.
Otherwise the response arrives immediately.
This is primarily intended for testing.
.IP
If the \fBfresh\fR flag is present a rescan is already underway then a second
rescan will be started when it completes.
The default behavior is to piggyback on the existing rescan.
.IP
NB that \fBfresh\fR is currently disabled in the server source, so using this
flag will just provoke an error.
.TP
.B resolve \fITRACK\fR
Resolve a track name, i.e. if this is an alias then return the real track name.
.TP
.B resume
Resume the current track after a \fBpause\fR command.
Requires the \fBpause\fR right.
.TP
.B revoke
Revoke the current login's cookie.
It will not be possible to use the cookie in the future.
.TP
.B rtp\-address
Report the RTP broadcast (or multicast) address, in the form \fIADDRESS
PORT\fR.
This command does not require authentication.
.TP
.B scratch \fR[\fIID\fR]
Remove the track identified by \fIID\fR, or the currently playing track if no
\fIID\fR is specified.
Requires one of the \fBscratch mine\fR, \fBscratch random\fR or
\fBscratch any\fR rights depending on how the track came to be
added to the queue.
.TP
.B schedule-add \fIWHEN\fR \fIPRIORITY\fR \fIACTION\fR ...
Schedule an event for the future.
.IP
.I WHEN
is the time when it should happen, as \fBtime_t\fR value.
It must refer to a time in the future.
.IP
.I PRIORITY
is the event priority.
This can be \fBnormal\fR, in which case the event will be run at startup if its
time has past, or \fBjunk\fR in which case it will be discarded if it is found
to be in the past at startup.
The meaning of other values is not defined.
.IP
.I ACTION
is the action to perform.
The choice of action determines the meaning of the remaining arguments.
Possible actions are:
.RS
.TP
.B play
Play a track.
The next argument is the track name.
Requires the \fBplay\fR right.
.TP
.B set-global
Set a global preference.
The next argument is the preference name and the final argument is the value to
set it to (omit it to unset it).
Requires the \fBglobal prefs\fR right.
.RE
.IP
You need the right at the point you create the event.
It is not possible to create scheduled events in expectation of a future change
in rights.
.TP
.B schedule-del \fIEVENT\fR
Deletes a scheduled event.
Users can always delete their own scheduled events; with the \fBadmin\fR
right you can delete any event.
.TP
.B schedule-get \fIEVENT\fR
Sends the details of scheduled event \fIEVENT\fR in a response body.
Each line is a pair of strings quoted in the usual way, the first being the key
ane the second the value.
No particular order is used.
.IP
Scheduled events are considered public information.
Right \fBread\fR is sufficient to see details of all events.
.TP
.B schedule-list
Sends the event IDs of all scheduled events in a response body, in no
particular order.
Use \fBschedule-get\fR to get the details of each event.
.TP
.B search \fITERMS\fR
Search for tracks matching the search terms.
The results are put in a response body, one to a line.
.IP
The search string is split in the usual way, with quoting supported, into a
list of terms.
Only tracks matching all terms are included in the results.
.IP
Any terms of the form \fBtag:\fITAG\fR limits the search to tracks with that
tag.
.IP
All other terms are interpreted as individual words which must be present in
the track name.
.IP
Spaces in terms don't currently make sense, but may one day be interpreted to
allow searching for phrases.
.TP
.B \fBset\fR \fITRACK\fR \fIPREF\fR \fIVALUE\fR
Set a preference.
Requires the \fBprefs\fR right.
.TP
.B set\-global \fIKEY\fR \fIVALUE\fR
Set a global preference.
Requires the \fBglobal prefs\fR right.
.TP
.B shutdown
Requests server shutdown.
Requires the \fBadmin\fR right.
.TP
.B stats
Send server statistics in plain text in a response body.
.TP
.B \fBtags\fR
Send the list of currently known tags in a response body.
.TP
.B \fBunset\fR \fITRACK\fR \fIPREF\fR
Unset a preference.
Requires the \fBprefs\fR right.
.TP
.B \fBunset\-global\fR \fIKEY\fR
Unset a global preference.
Requires the \fBglobal prefs\fR right.
.TP
.B user \fIUSERNAME\fR \fIRESPONSE\fR
Authenticate as user \fIUSERNAME\fR.
See
.B AUTHENTICATION
below.
.TP
.B userinfo \fIUSERNAME PROPERTY
Get a user property.
.TP
.B users
Send the list of currently known users in a response body.
.TP
.B version
Send back a response with the server version as the second field.
.TP
.B volume \fR[\fILEFT\fR [\fIRIGHT\fR]]
Get or set the volume.
.IP
With zero parameters just gets the volume and reports the left and right sides
as the 2nd and 3rd fields of the response.
.IP
With one parameter sets both sides to the same value.
With two parameters sets each side independently.
Setting the volume requires the \fBvolume\fR right.
.SH RESPONSES
Responses are three-digit codes.
The first digit distinguishes errors from successful responses:
.TP
.B 2
Operation succeeded.
.TP
.B 5
Operation failed.
.PP
The second digit breaks down the origin of the response:
.TP
.B 0
Generic responses not specific to the handling of the command.
Mostly this is parse errors.
.TP
.B 1
51x errors indicate that the user had insufficient rights for the command.
.TP
.B 3
Authentication responses.
.TP
.B 5
Responses specific to the handling of the command.
.PP
The third digit provides extra information about the response:
.TP
.B 0
Text part is just commentary.
.TP
.B 1
Text part is a constant result e.g. \fBversion\fR.
.TP
.B 2
Text part is a potentially variable result.
.TP
.B 3
Text part is just commentary; a dot-stuffed body follows.
.TP
.B 4
Text part is just commentary; an indefinite dot-stuffed body follows.
(Used for \fBlog\fR.)
.TP
.B 5
Used with "normal" errors, for instance a preference not being found.
The text part is commentary.
.TP
.B 9
The text part is just commentary (but would normally be a response for this
command) e.g. \fBplaying\fR.
.PP
Result strings (not bodies) intended for machine parsing (i.e. xx1 and xx2
responses) are quoted.
.SH AUTHENTICATION
When a connection is made the server sends a \fB231\fR response before any
command is received.
This contains a protocol generation, an algorithm name and a
challenge encoded in hex, all separated by whitespace.
.PP
The current protocol generation is \fB2\fR.
.PP
The possible algorithms are (currently) \fBsha1\fR, \fBsha256\fR, \fBsha384\fR
and \fBsha512\fR.
\fBSHA1\fR etc work as synonyms.
.PP
The \fBuser\fR response consists of the selected hash of the user's password
concatenated with the challenge, encoded in hex.
.SH "TRACK INFORMATION"
Track information is encoded in a line (i.e. using the usual line syntax) as
pairs of fields.
The first is a name, the second a value.
The names have the following meanings:
.TP 12
.B expected
The time the track is expected to be played at.
.TP
.B id
A string uniquely identifying this queue entry.
.TP
.B played
The time the track was played at.
.TP
.B scratched
The user that scratched the track.
.TP
.B origin
The origin of the track.  Valid origins are:
.RS
.TP 12
.B adopted
The track was originally randomly picked but has been adopted by a user.
.TP
.B picked
The track was picked by a user.
.TP
.B random
The track was randomly picked.
.TP
.B scheduled
The track was played from a scheduled action.
.TP
.B scratch
The track is a scratch sound.
.RE
.TP
.B state
The current track state.
Valid states are:
.RS
.TP 12
.B failed
The player failed (exited with nonzero status but wasn't scratched).
.TP
.B ok
The track was played without any problems.
.TP
.B scratched
The track was scratched.
.TP
.B started
The track is currently playing.
.TP
.B paused
Track is playing but paused.
.TP
.B unplayed
In the queue, hasn't been played yet.
.TP
.B quitting
The track was terminated because the server is shutting down.
.RE
.TP
.B submitter
The user that submitted the track.
.TP
.B track
The filename of the track.
.TP
.B when
The time the track was added to the queue.
.TP
.B wstat
The wait status of the player in decimal.
.PP
Note that \fBorigin\fR is new with DisOrder 4.3, and obsoletes some old
\fBstate\fR values.
.SH NOTES
Times are decimal integers using the server's \fBtime_t\fR.
.PP
For file listings, the regexp applies to the basename of the returned file, not
the whole filename, and letter case is ignored.
\fBpcrepattern\fR(3) describes the regexp syntax.
.PP
Filenames are in UTF-8 even if the collection they come from uses some other
encoding - if you want to access the real file (in such cases as the filenames
actually correspond to a real file) you'll have to convert to whatever the
right encoding is.
.SH "EVENT LOG"
The event log consists of lines starting with a hexadecimal timestamp and a
keyword followed by (optionally) parameters.
The parameters are quoted in the usual DisOrder way.
Currently the following keywords are used:
.TP
.B adopted \fIID\fR \fIUSERNAME\fR
\fIUSERNAME\fR adopted track \fIID\fR.
.TP
.B completed \fITRACK\fR
Completed playing \fITRACK\fR
.TP
.B failed \fITRACK\fR \fIERROR\fR
Completed playing \fITRACK\fR with an error status
.TP
.B global_pref \fIPREF\fR [\fIVALUE\fR]
A global preference was set or unset.
.TP
.B moved \fIUSERNAME\fR
User \fIUSERNAME\fR moved some track(s).
Further details aren't included any more.
.TP
.B playing \fITRACK\fR [\fIUSERNAME\fR]
Started playing \fITRACK\fR.
.TP
.B playlist_created \fIPLAYLIST\fR \fISHARING\fR
Sent when a playlist is created.
For private playlists this is intended to be sent only to the owner (but
this is not currently implemented).
.TP
.B playlist_deleted \fIPLAYLIST\fR
Sent when a playlist is deleted.
For private playlists this is intended to be sent only to the owner (but
this is not currently implemented).
.TP
.B playlist_modified \fIPLAYLIST\fR \fISHARING\fR
Sent when a playlist is modified (either its contents or its sharing status).
For private playlists this is intended to be sent only to the owner (but
this is not currently implemented).
.TP
.B queue \fIQUEUE-ENTRY\fR...
Added \fITRACK\fR to the queue.
.TP
.B recent_added \fIQUEUE-ENTRY\fR...
Added \fIID\fR to the recently played list.
.TP
.B recent_removed \fIID\fR
Removed \fIID\fR from the recently played list.
.TP
.B removed \fIID\fR [\fIUSERNAME\fR]
Queue entry \fIID\fR was removed.
This is used both for explicit removal (when \fIUSERNAME\fR is present)
and when playing a track (when it is absent).
.TP
.B rescanned
A rescan completed.
.TP
.B scratched \fITRACK\fR \fIUSERNAME\fR
\fITRACK\fR was scratched by \fIUSERNAME\fR.
.TP
.B state \fIKEYWORD\fR
Some state change occurred.
The current set of keywords is:
.RS
.TP
.B completed
The current track completed successfully.
.TP
.B disable_play
Playing was disabled.
.TP
.B disable_random
Random play was disabled.
.TP
.B enable_play
Playing was enabled.
.TP
.B enable_random
Random play was enabled.
.TP
.B failed
The current track failed.
.TP
.B pause
The current track was paused.
.TP
.B playing
A track started playing.
.TP
.B resume
The current track was resumed.
.TP
.B rights_changed \fIRIGHTS\fR
User's rights were changed.
.TP
.B scratched
The current track was scratched.
.PP
To simplify client implementation, \fBstate\fR commands reflecting the current
state are sent at the start of the log.
.RE
.TP
.B user_add \fIUSERNAME\fR
A user was created.
.TP
.B user_delete \fIUSERNAME\fR
A user was deleted.
.TP
.B user_edit \fIUSERNAME\fR \fIPROPERTY\fR
Some property of a user was edited.
.TP
.B user_confirm \fIUSERNAME\fR
A user's login was confirmed (via the web interface).
.TP
.B volume \fILEFT\fR \fIRIGHT\fR
The volume changed.
.PP
.IR QUEUE-ENTRY ...
is as defined in
.B "TRACK INFORMATION"
above.
.PP
The \fBuser-*\fR messages are only sent to admin users, and are not sent over
non-local connections unless \fBremote_userman\fR is enabled.
.SH "CHARACTER ENCODING"
All data sent by both server and client is encoded using UTF-8.
Moreover it must be valid UTF-8, i.e. non-minimal sequences are not
permitted, nor are surrogates, nor are code points outside the
Unicode code space.
.PP
There are no particular normalization requirements on either side of the
protocol.
The server currently converts internally to NFC, the client must
normalize the responses returned if it needs some normalized form for further
processing.
.PP
The various characters which divide up lines may not be followed by combining
characters.
For instance all of the following are prohibited:
.TP
.B o
LINE FEED followed by a combining character.
For example the sequence LINE FEED, COMBINING GRAVE ACCENT is never permitted.
.TP
.B o
APOSTROPHE or QUOTATION MARK followed by a combining character when used to
delimit fields.
For instance a line starting APOSTROPHE, COMBINING CEDILLA is prohibited.
.IP
Note that such sequences are not prohibited when the quote character cannot be
interpreted as a field delimiter.
For instance APOSTROPHE, REVERSE SOLIDUS, APOSTROPHE, COMBINING CEDILLA,
APOSTROPHE would be permitted.
.TP
.B o
REVERSE SOLIDUS (BACKSLASH) followed by a combining character in a quoted
string when it is the first character of an escape sequence.
For instance a line starting APOSTROPHE, REVERSE SOLIDUS, COMBINING TILDE
is prohibited.
.IP
As above such sequences are not prohibited when the character is not being used
to start an escape sequence.
For instance APOSTROPHE, REVERSE SOLIDUS, REVERSE SOLIDS, COMBINING TILDE,
APOSTROPHE is permitted.
.TP
.B o
Any of the field-splitting whitespace characters followed by a combining
character when not part of a quoted field.
For instance a line starting COLON, SPACE, COMBINING CANDRABINDU is prohibited.
.IP
As above non-delimiter uses are fine.
.TP
.B o
The FULL STOP characters used to quote or delimit a body.
.PP
Furthermore none of these characters are permitted to appear in the context of
a canonical decomposition (i.e. they must still be present when converted to
NFC).
In practice however this is not an issue in Unicode 5.0.
.PP
These rules are consistent with the observation that the split() function is
essentially a naive ASCII parser.
The implication is not that these sequences never actually appear in
the protocol, merely that the server is not required to honor them in
any useful way nor be consistent between versions: in current
versions the result will be lines and fields that start with combining
characters and are not necessarily split where you expect, but future versions
may remove them, reject them or ignore some or all of the delimiters that have
following combining characters, and no notice will be given of any change.
.SH "SEE ALSO"
\fBdisorder\fR(1),
\fBtime\fR(2),
\fBdisorder\fR(3),
\fBpcrepattern\fR(3)
\fBdisorder_config\fR(5),
\fBdisorderd\fR(8),
\fButf8\fR(7)
.\" Local Variables:
.\" mode:nroff
.\" fill-column:79
.\" End: