From: ian <ian>
Date: Thu, 26 Aug 2004 02:54:22 +0000 (+0000)
Subject: Makefile in oprint target; fit fab on
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ijackson/git?a=commitdiff_plain;h=02a3d28addabc28035c2e56e1d7d3fda2890ff06;p=trains.git

Makefile in oprint target; fit fab on
---

diff --git a/pcb/Makefile b/pcb/Makefile
index 75a5178..b28d26b 100644
--- a/pcb/Makefile
+++ b/pcb/Makefile
@@ -31,7 +31,7 @@ picprogs:	flasher.hex flash-all.hex
 
 netlists:	reversers.net
 
-long2splita4=pstops -pa3 -d '0(0cm,-1cm)+0(-9cm,-10cm)' <$< $o
+long2splita4=pstops -pa3 -d '0(1.5cm,-1cm)+0(-9cm,-10cm)' <$< $o
 
 # print from pcb(1) as follows:
 #   File / Print Layout / ...
@@ -46,19 +46,19 @@ pcboprints:	reversers.oprint-back.ps \
 		reversers.oprint-frontsilk.ps \
 		reversers.oprint-assembly.ps
 
-%.oprint-back.ps:	%.pcb.output_back.ps
+%.oprint-back.ps:	%.pcb.output_back.ps Makefile
 		$(long2splita4)
 
-%.oprint-front.ps:	%.pcb.output_front.ps
+%.oprint-front.ps:	%.pcb.output_front.ps Makefile
 		$(long2splita4)
 
-%.oprint-fab.ps:	%.pcb.output_fab.ps
+%.oprint-fab.ps:	%.pcb.output_fab.ps Makefile
 		$(long2splita4)
 
-%.oprint-frontsilk.ps:	%.pcb.output_frontsilk.ps
+%.oprint-frontsilk.ps:	%.pcb.output_frontsilk.ps Makefile
 		$(long2splita4)
 
-%.oprint-assembly.ps:	%.pcb.output_assembly.ps
+%.oprint-assembly.ps:	%.pcb.output_assembly.ps Makefile
 		pstops -pa3 '0@1.5(-12cm,-29cm)' <$< $o
 
 # these outputs from pstops are really A4 and can be viewed nicely with
diff --git a/pic.make b/pic.make
index 75a5178..b28d26b 100644
--- a/pic.make
+++ b/pic.make
@@ -31,7 +31,7 @@ picprogs:	flasher.hex flash-all.hex
 
 netlists:	reversers.net
 
-long2splita4=pstops -pa3 -d '0(0cm,-1cm)+0(-9cm,-10cm)' <$< $o
+long2splita4=pstops -pa3 -d '0(1.5cm,-1cm)+0(-9cm,-10cm)' <$< $o
 
 # print from pcb(1) as follows:
 #   File / Print Layout / ...
@@ -46,19 +46,19 @@ pcboprints:	reversers.oprint-back.ps \
 		reversers.oprint-frontsilk.ps \
 		reversers.oprint-assembly.ps
 
-%.oprint-back.ps:	%.pcb.output_back.ps
+%.oprint-back.ps:	%.pcb.output_back.ps Makefile
 		$(long2splita4)
 
-%.oprint-front.ps:	%.pcb.output_front.ps
+%.oprint-front.ps:	%.pcb.output_front.ps Makefile
 		$(long2splita4)
 
-%.oprint-fab.ps:	%.pcb.output_fab.ps
+%.oprint-fab.ps:	%.pcb.output_fab.ps Makefile
 		$(long2splita4)
 
-%.oprint-frontsilk.ps:	%.pcb.output_frontsilk.ps
+%.oprint-frontsilk.ps:	%.pcb.output_frontsilk.ps Makefile
 		$(long2splita4)
 
-%.oprint-assembly.ps:	%.pcb.output_assembly.ps
+%.oprint-assembly.ps:	%.pcb.output_assembly.ps Makefile
 		pstops -pa3 '0@1.5(-12cm,-29cm)' <$< $o
 
 # these outputs from pstops are really A4 and can be viewed nicely with
diff --git a/spice/Makefile b/spice/Makefile
index 75a5178..b28d26b 100644
--- a/spice/Makefile
+++ b/spice/Makefile
@@ -31,7 +31,7 @@ picprogs:	flasher.hex flash-all.hex
 
 netlists:	reversers.net
 
-long2splita4=pstops -pa3 -d '0(0cm,-1cm)+0(-9cm,-10cm)' <$< $o
+long2splita4=pstops -pa3 -d '0(1.5cm,-1cm)+0(-9cm,-10cm)' <$< $o
 
 # print from pcb(1) as follows:
 #   File / Print Layout / ...
@@ -46,19 +46,19 @@ pcboprints:	reversers.oprint-back.ps \
 		reversers.oprint-frontsilk.ps \
 		reversers.oprint-assembly.ps
 
-%.oprint-back.ps:	%.pcb.output_back.ps
+%.oprint-back.ps:	%.pcb.output_back.ps Makefile
 		$(long2splita4)
 
-%.oprint-front.ps:	%.pcb.output_front.ps
+%.oprint-front.ps:	%.pcb.output_front.ps Makefile
 		$(long2splita4)
 
-%.oprint-fab.ps:	%.pcb.output_fab.ps
+%.oprint-fab.ps:	%.pcb.output_fab.ps Makefile
 		$(long2splita4)
 
-%.oprint-frontsilk.ps:	%.pcb.output_frontsilk.ps
+%.oprint-frontsilk.ps:	%.pcb.output_frontsilk.ps Makefile
 		$(long2splita4)
 
-%.oprint-assembly.ps:	%.pcb.output_assembly.ps
+%.oprint-assembly.ps:	%.pcb.output_assembly.ps Makefile
 		pstops -pa3 '0@1.5(-12cm,-29cm)' <$< $o
 
 # these outputs from pstops are really A4 and can be viewed nicely with